1/6 Hot Toys MMS699 & MMS700 ROTJ Darth Vader

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I had a chance to spend some time with this one and compares to my ESB/R1 kitbash.

1000001870.jpg

First observations, I like the new helmet and the new gloves are a DREAM. I particularly appreciate the new relaxed hands. The cape? No thank you. My drape cape from Jaxon Xu is a big improvement, but he still looks frumpy. Might be the body, but his pants look more thick and loose than any other Vader I've seen. Am I wrong?

1000001880.jpg


I find myself limited with the amount of futzing I can do, because the belt is TIGHT will not unfasten. I know OWK Vader had a "stuck" belt you had to slide down his legs and boots to actually remove. Is that the case here? If so, it is not budging. The belt is even tighter than the codpiece, so it has to rest above it. Not a fan.

My helmet did have a few scuffs and scratches on it, but after some buffing with cape cod polishing cloth it looks better.

Lastly, if anyone was wondering if the ROTJ helmet can fit on the OWK/R1 body, it can indeed.

1000001878.jpg
 
My helmet did have a few scuffs and scratches on it, but after some buffing with cape cod polishing cloth it looks better.

Can you provide more info on this cape cod polishing cloth? Are they available in stores? My cursory research makes it seem like they are primarily for cleaning scratches off watches.

My original dome had some noticeable paint scratches, and the replacement had some light scratches that I decided I could live with. If it's possible to remove them, I'd like to give it a shot.
 
I had a chance to spend some time with this one and compares to my ESB/R1 kitbash.

View attachment 743237
First observations, I like the new helmet and the new gloves are a DREAM. I particularly appreciate the new relaxed hands. The cape? No thank you. My drape cape from Jaxon Xu is a big improvement, but he still looks frumpy. Might be the body, but his pants look more thick and loose than any other Vader I've seen. Am I wrong?

View attachment 743238

I find myself limited with the amount of futzing I can do, because the belt is TIGHT will not unfasten. I know OWK Vader had a "stuck" belt you had to slide down his legs and boots to actually remove. Is that the case here? If so, it is not budging. The belt is even tighter than the codpiece, so it has to rest above it. Not a fan.

My helmet did have a few scuffs and scratches on it, but after some buffing with cape cod polishing cloth it looks better.

Lastly, if anyone was wondering if the ROTJ helmet can fit on the OWK/R1 body, it can indeed.

View attachment 743242
The belt can definitely come off just a little more work than usual. You can’t really move the boxes due to the wiring and a kind of tape on the backside of the belt but the built is basically the same as all previous with just a little reenforment around the hole that the pin goes into. It is tight. I use a flat ended plastic tool to help I snap the belt so I wouldn’t damage it pulling it apart
 

Attachments

  • IMG_2758.png
    IMG_2758.png
    8.3 MB
Can you provide more info on this cape cod polishing cloth? Are they available in stores? My cursory research makes it seem like they are primarily for cleaning scratches off watches.

My original dome had some noticeable paint scratches, and the replacement had some light scratches that I decided I could live with. If it's possible to remove them, I'd like to give it a shot.
Cape cod cloths is a polishing cloth. Can be easily found on eBay. It’s what a lot of people , myself included , used to make the last mandalorian armor super shiny as it took off the layer of dirt and grime HT applied and helped the armor to shine. You can’t probably find a tutorial on YouTube about shining up the mandalorian armor to see how to do it. It sure how it would work on the Vader helmet though as have not used it there
 

Attachments

  • IMG_2763.png
    IMG_2763.png
    4.5 MB
Can you provide more info on this cape cod polishing cloth? Are they available in stores? My cursory research makes it seem like they are primarily for cleaning scratches off watches.

My original dome had some noticeable paint scratches, and the replacement had some light scratches that I decided I could live with. If it's possible to remove them, I'd like to give it a shot.
As Deathstalker said, they are polishing cloths and indeed mostly used for polishing metal, but they help add shine to any plastic pieces that are supposed to look glossy. JazzInc used some for his ANH Vader mods way back when. I got mine off Amazon.

Again, I was not able to remove mine completely, but here is a before and after:

Before.....
1000001762.jpg


After:
1000001925.jpg
 
I was curious what a straight body swap to the OWK Vader would look like for ROTJ pieces. Everything is compatible EXCEPT that darn belt! It's a few sizes too small for the OWK body plus the outfit and vest. Maybe it would fit without the fatsuit but I did not check. The belt barely fits on the ROTJ body and costume as it is.

Here is the OWK body and ANH belt, with ROTJ everything else. Arms are avle to sit closer to the body, allowing for a more natural stance.

1000001916.jpg


If you swap the ROTJ shoulder armor for the OWK/R1 shoulder armor, you get some more neck movement.

1000001918.jpg

1000001919.jpg


And here is the stock ROTJ next to my kitbash.

1000001922.jpg
 
I was curious what a straight body swap to the OWK Vader would look like for ROTJ pieces. Everything is compatible EXCEPT that darn belt! It's a few sizes too small for the OWK body plus the outfit and vest. Maybe it would fit without the fatsuit but I did not check. The belt barely fits on the ROTJ body and costume as it is.

Here is the OWK body and ANH belt, with ROTJ everything else. Arms are avle to sit closer to the body, allowing for a more natural stance.

View attachment 743883

If you swap the ROTJ shoulder armor for the OWK/R1 shoulder armor, you get some more neck movement.

View attachment 743884
View attachment 743885

And here is the stock ROTJ next to my kitbash.

View attachment 743886
If the objective is to get the arms to sit closer the the body you can just cut the underarm are of the flexible chest piece on the ROTJ body as well. It’s what a lot of people did with the anh body
 

Attachments

  • IMG_2788.png
    IMG_2788.png
    2.5 MB
  • IMG_2789.png
    IMG_2789.png
    7 MB
  • IMG_2790.png
    IMG_2790.png
    7.2 MB
Back
Top