Hulk VS Spiderman Diorama, Does this look wierd to you?

[Gammabomb]

Let me give you the story first. When it was first released I received a damaged statue. The Hulk was cracked down the middle and the spidey looked like he was dropped on the floor. I returned it and received the replacement 6 months later. When I got them i checked them out to make sure there was no damage and everything was good so I packed them away never assembling them. Fast forward to this week I finally got a place to display it and something seems off. The spidey seems to sit too close to the hulk and doesn't look like the pic on the box or other collector's statues i have seen. Check them out and let me know what you think.

 

[Anespian]

The traffic lamp post can be easily bent for desired pose. To be safer, used a hair dryer. However, you must consider bending it back later should you wish to box it due to fittings in the styro box. Lesson learnt for me

 

[Gammabomb]

The traffic lamp post can be easily bent for desired pose. To be safer, used a hair dryer. However, you must consider bending it back later should you wish to box it due to fittings in the styro box. Lesson learnt for me

So you have adjusted the lamp post on yours? How hot do you leave the hair dryer? I'm just scared to break it. Thanks for the input.

 

[Shai]

I remember it was a common problem when this came out back in the day....You should display Hulk alone without spidey anyway...

 

[kierbaudy]

Not wierd, it was a problem when it came out. You're lucky you got a replacement.

 

[Colossus]

What all my boardies said, BTW Welcome to the Show Gamma

 

[Gammabomb]

Thanks for the replies guys. I just wanted to get your expert opinions. I guess i'll just leave it alone. It's kinda growing on me, and it seems like it's something spidey would do, just in his face cracking wise.

 

[ComputerFly]

Looks a little goofy. I've never seen one that close before.

A few tips. The pole is actually make of metal. It can be bent, but you want to heat it with a hair dryer in the area that you would adjust. That will make the paint pliable and keep it from cracking when you adjust it.

I wouldn't suggest trying to bend it 'at the bend' because the metal there is already 'crimped' and would probably break. You want to do your work where the pole is the 'roundest' and you just heat that section and tweak it, little by little until spidey is where you want him.

I would at least try to get them looking eye to eye. Here's my Gray Hulk vs..

 

[Gammabomb]

Looks a little goofy. I've never seen one that close before.

A few tips. The pole is actually make of metal. It can be bent, but you want to heat it with a hair dryer in the area that you would adjust. That will make the paint pliable and keep it from cracking when you adjust it.

I wouldn't suggest trying to bend it 'at the bend' because the metal there is already 'crimped' and would probably break. You want to do your work where the pole is the 'roundest' and you just heat that section and tweak it, little by little until spidey is where you want him.

I would at least try to get them looking eye to eye. Here's my Gray Hulk vs..

I was wondering what the light pole was made of. I just gotta get the guts to try and bend it to where i think it should be. If it's not to much trouble can you post a pic of your light pole so I can see what angles i'm shooting for. Thanks for the tips, you da man!!!

 

[jye4ever]

Looks a little goofy. I've never seen one that close before.

A few tips. The pole is actually make of metal. It can be bent, but you want to heat it with a hair dryer in the area that you would adjust. That will make the paint pliable and keep it from cracking when you adjust it.

I wouldn't suggest trying to bend it 'at the bend' because the metal there is already 'crimped' and would probably break. You want to do your work where the pole is the 'roundest' and you just heat that section and tweak it, little by little until spidey is where you want him.

I would at least try to get them looking eye to eye. Here's my Gray Hulk vs..

Nice pic CF

 

[Andr3w]

Not weird at all. Great pictures you've taken. Thanks for sharing

 

[Gammabomb]

Has anyone ever adjusted the spidey? If so how exactly did you do it?

 

[vader70450]

man..I miss this statue...I miss selling this one more than my Doom EX.

 

[Batman29]

Looks a little goofy. I've never seen one that close before.

A few tips. The pole is actually make of metal. It can be bent, but you want to heat it with a hair dryer in the area that you would adjust. That will make the paint pliable and keep it from cracking when you adjust it.

I wouldn't suggest trying to bend it 'at the bend' because the metal there is already 'crimped' and would probably break. You want to do your work where the pole is the 'roundest' and you just heat that section and tweak it, little by little until spidey is where you want him.

I would at least try to get them looking eye to eye. Here's my Gray Hulk vs..

Seriously dude, nice explanation with the pic.

I am thinking from the light show that this is the Exc of the gray correct?

Are you thinking of selling this? PM me if you are.

 

[Batman29]

man..I miss this statue...I miss selling this one more than my Doom EX.

You had the Doom Exc and the Gray Hulk dio Exc and you sold them both?

May I ask why?

 

[Shai]

Had grey hulk Dio # 4 back in the days..

 

[Shai]

Seriously dude, nice explanation with the pic.

I am thinking from the light show that this is the Exc of the gray correct?

Are you thinking of selling this? PM me if you are.

the grey doesnt have a reg.It only comes with the lights that works.

 

[Balsquat]

Personally I like it as is and would not risk bending it. Looks great!

 

[Mesa]

Had grey hulk Dio # 4 back in the days..

You selling it = Caca FAIL

 

[Shai]

You selling it = Caca FAIL