Talk to da hand!

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dizzyarse

Super Freak
Joined
Sep 13, 2008
Messages
843
Reaction score
1
Location
UK
Done some more work on my T2 Arnie, using the Hot Toys Dutch body and modified head... Mr. T700 now has an arm missing because it has been re-painted and stuck on Arnie! It took ages to figure out and cut the models so it would hinge at the elbow, twist just below, and have a full range of movement.
Going to do a new battle damaged head for him using another Dutch head I got cheap, and my son wants the endos' body for his own custom endo. The legs are going spare, so if anyone wants them pm me with an offer. Or else they will go up on eBay Thursday.
Dizzy
 
And a few shots tooled up.
He looks much better without the flash, but I will have to wait for a nice bright day to take some decent pics.
Dizzy
 
Cooooollllllllll!

Its NECAs man or machine in 1/6th form. Nice work. I've actually had an inkling of trying this myself if I ever have enough Hot toys Endos that I feel OK with butchering one for parts! Only 2 right now, original and BD.

Any chance of a tutorial on how you incorporated the endo-arm into the muscle arm?
 
A bit of a expensive way to do a endo arm is'nt it?.....

Yeah, I know, but damn good fun! I did a previous one using a Hot Toys Kyle Reese endo arm... swapped the thumb around and grafted it onto a body, had to find a small swivel plate to insert between the elbow and forearm and cast a muscle forearm sleeve. Looked good, but it didnt have the movable fingers.
 
Yeah, I know, but damn good fun! I did a previous one using a Hot Toys Kyle Reese endo arm... swapped the thumb around and grafted it onto a body, had to find a small swivel plate to insert between the elbow and forearm and cast a muscle forearm sleeve. Looked good, but it didnt have the movable fingers.

Thats the one I bought from you! :lol:lol
 
Any chance of a tutorial on how you incorporated the endo-arm into the muscle arm?

Yeah, no problem.
-Dismantle endo arm by removing elbow screw, push through the elbow joint from inside to outside to remove securing lug. You will need to remove the pins on the lower piston ends by unscrewing them also. and lever inside and outside of forearm apart to release lower arm, and put it out of harms' way.
-Dismantle upper arm by gently but firmly levering the sides apart. The pins holding the upper part of the pistons should ping out on their own.
-You will need the outside half of the upper arm to have the elbow joint. The swivel part is on the lower arm.
-Grafting onto a body depends which body you use. I was using the Dutch body and that has a weird arrangement for the elbow... it is a bendy bit of metal! Yes, a bendy bit of metal! That is why I had to go through all the rigmerole of using the endo elbow.
-Cut the Dutch forearm a bit below the elbow. It is hollow rubber and easily peels off the arm tube inside. Cut up the inside seam to a bit below the shoulder and roll the rubber sleeve up to the bicep area and remove the screws on the casing to release the lower arm tube and bendy metal. You can discard these.
-The endo upper arm you have removed has a central vertical section. Trim this so it is the length of the remaining Dutch arm tube... but only up to the metal band you will see going around it... this is to stop the tube coming apart when the arm is bent.
-Cut a groove in the lower remaining arm tube and be sure you have lined up everything before getting out the super-glue. I also put a screw at the bicep area through the endo upper arm and into the Dutch arm tube.
-Roll the sleeve down and plug you endo forearm on. It should have a 360 degree rotation and a 90 degree vertical motion. Superglue the seam back together, but dont get any on the joints!
Make sure you put this arm on before the t-shirt, and insert it first, then put the other arm on... same as getting a stroke patient dressed, do the weak limb first as it gets pulled about less.
Then add some gore and have some fun!

I hope that makes sense.
Dizzy
 
Yeah, no problem.
-Dismantle endo arm by removing elbow screw, push through the elbow joint from inside to outside to remove securing lug. You will need to remove the pins on the lower piston ends by unscrewing them also. and lever inside and outside of forearm apart to release lower arm, and put it out of harms' way.
-Dismantle upper arm by gently but firmly levering the sides apart. The pins holding the upper part of the pistons should ping out on their own.
-You will need the outside half of the upper arm to have the elbow joint. The swivel part is on the lower arm.
-Grafting onto a body depends which body you use. I was using the Dutch body and that has a weird arrangement for the elbow... it is a bendy bit of metal! Yes, a bendy bit of metal! That is why I had to go through all the rigmerole of using the endo elbow.
-Cut the Dutch forearm a bit below the elbow. It is hollow rubber and easily peels off the arm tube inside. Cut up the inside seam to a bit below the shoulder and roll the rubber sleeve up to the bicep area and remove the screws on the casing to release the lower arm tube and bendy metal. You can discard these.
-The endo upper arm you have removed has a central vertical section. Trim this so it is the length of the remaining Dutch arm tube... but only up to the metal band you will see going around it... this is to stop the tube coming apart when the arm is bent.
-Cut a groove in the lower remaining arm tube and be sure you have lined up everything before getting out the super-glue. I also put a screw at the bicep area through the endo upper arm and into the Dutch arm tube.
-Roll the sleeve down and plug you endo forearm on. It should have a 360 degree rotation and a 90 degree vertical motion. Superglue the seam back together, but dont get any on the joints!
Make sure you put this arm on before the t-shirt, and insert it first, then put the other arm on... same as getting a stroke patient dressed, do the weak limb first as it gets pulled about less.
Then add some gore and have some fun!

I hope that makes sense.
Dizzy

Thanks a lot for that, it seems like it makes sense but of course I can't be sure of your specifics till I attempt it myself. I'm going to save this page in favourites for future referance. It could be very future referance in fact. Still kinda hoping Hot Toys acquires the rights to T2 'human' figures - actually I'm depending on that for the headsculpt and clothes. This thread might be reawakened in 2 or 3 years with a necropost!
 
Back
Top