Sixth Scale Man
Super Freak
Looks good! It’ll be nice to have him join the collection.
AUGTOYS - 1/6 Dune Action Figures (Licensed)
- Thread starter Asta
- Start date
Help Support Collector Freaks Forum:
Chopper Face
Super Freak
Looks really great. It will make an excellent display piece. The sculpt is on point; it could just use a paint upgrade, especially the eyes.
I think- other than a higher quality sculpt and the real hair- the primary cause of InArt’s higher cost lies in the way they’ll produce an intricate, layered, miniature replica of the stillsuit providing a more tactile experience and better articulation.
At least I hope they don’t just use a single sculpted piece for the torso and that godawful HT super-suit material.
I think- other than a higher quality sculpt and the real hair- the primary cause of InArt’s higher cost lies in the way they’ll produce an intricate, layered, miniature replica of the stillsuit providing a more tactile experience and better articulation.
At least I hope they don’t just use a single sculpted piece for the torso and that godawful HT super-suit material.
histrionics
Super Freak
- Joined
- Jun 25, 2010
- Messages
- 273
- Reaction score
- 387
Looking at the video I'd say this turned out quite nice. Considering AUG is a relatively unknown company with hardly any track record, this Stillsuit Paul figure turned out to be as good as the promo pics, if not somewhat better. "Better" being less of a qualitative assessment and more of a psychological sense of relief, because sometimes it feels like a burden lifted to see a figure that isn't shockingly different or worse than the promo pics. There's not a lot to nitpick here.
The sculpt is much better than the previous ceremonial suit version, which looked like a cosplay Paul, approaching the likeness, but off in a way that was irritating. It does looks like the body is heftier than what the promo pics showed - he should be very thin and scrawny under that suit, to the point that the bulk of the suit material doesn't even add much to the body's silhouette/profile.
I like the sculpted hair a lot here. It reminds me of Art Figure's Scissorhands figure from a couple of yeas ago, where the hair was so complex and finely-detailed that it left no real desire for a rooted treatment. Sometimes you have to ask what's really being achieved by the hot pursuit of something that can't be done to a satisfying degree at this scale. Seeing how InArt so massively fumbled the sculpted hair on their Aragorn figure, AUG's work here outclasses them by a long mile. Again, a relatively unknown company with little history can show us how it should be done... and done within a good price point.
* Just a footnote on the rooted hair topic, I'm starting to lean out of any strong desire for pursuing rooted hair after InArt's latest Gandalf and Aragorn releases. The figures are great, but not without some irritating problems with the hair. Problems that belie what the promo pics showed and created the incentive for our preorder deposits. In figure sculpting and tailoring we're trying to approach scaled accuracy and realism, and we've gotten closer every few years through innovation, increased skill and craft and advancing technology. We can achieve a lot more of the illusory accuracy with plastic, whereas rooted hair scaled down to 1/6 is almost taking us backward to problematic points in craft and workmanship of the past. We're no longer looking at the accuracy of the figure, but struggling with the localized unpredictable behaviour of the material itself in rooted hair. You can have a mostly perfect and satisfying looking figure, topped with a mop of some artificial and off-putting toupée material that almost ruins everything, and then we're left debating and finicking the material rather than the overall figure. Rooted hair still seems to resist taming and doing the job of sculpting the illusion of the character-figure's proper hair styling. Sometimes it just looks "off" rather than on-point and there's not much of the artist/sculptor's intent and craft left in the material. The innovation will happen, and InArt did make great strides with how they treat rooted hair, but there's still a lot of work to do.
The sculpt is much better than the previous ceremonial suit version, which looked like a cosplay Paul, approaching the likeness, but off in a way that was irritating. It does looks like the body is heftier than what the promo pics showed - he should be very thin and scrawny under that suit, to the point that the bulk of the suit material doesn't even add much to the body's silhouette/profile.
I like the sculpted hair a lot here. It reminds me of Art Figure's Scissorhands figure from a couple of yeas ago, where the hair was so complex and finely-detailed that it left no real desire for a rooted treatment. Sometimes you have to ask what's really being achieved by the hot pursuit of something that can't be done to a satisfying degree at this scale. Seeing how InArt so massively fumbled the sculpted hair on their Aragorn figure, AUG's work here outclasses them by a long mile. Again, a relatively unknown company with little history can show us how it should be done... and done within a good price point.
* Just a footnote on the rooted hair topic, I'm starting to lean out of any strong desire for pursuing rooted hair after InArt's latest Gandalf and Aragorn releases. The figures are great, but not without some irritating problems with the hair. Problems that belie what the promo pics showed and created the incentive for our preorder deposits. In figure sculpting and tailoring we're trying to approach scaled accuracy and realism, and we've gotten closer every few years through innovation, increased skill and craft and advancing technology. We can achieve a lot more of the illusory accuracy with plastic, whereas rooted hair scaled down to 1/6 is almost taking us backward to problematic points in craft and workmanship of the past. We're no longer looking at the accuracy of the figure, but struggling with the localized unpredictable behaviour of the material itself in rooted hair. You can have a mostly perfect and satisfying looking figure, topped with a mop of some artificial and off-putting toupée material that almost ruins everything, and then we're left debating and finicking the material rather than the overall figure. Rooted hair still seems to resist taming and doing the job of sculpting the illusion of the character-figure's proper hair styling. Sometimes it just looks "off" rather than on-point and there's not much of the artist/sculptor's intent and craft left in the material. The innovation will happen, and InArt did make great strides with how they treat rooted hair, but there's still a lot of work to do.
Last edited:
MrConor212
Super Freak
spaceghost2000
Super Freak
- Joined
- Nov 29, 2020
- Messages
- 726
- Reaction score
- 740
Makes a nice change from arduous essays of people not liking stuff.
histrionics
Super Freak
- Joined
- Jun 25, 2010
- Messages
- 273
- Reaction score
- 387
They're not large paragraphs. Go big or go home, maybe!Tldr. You wrote 4 large paragraphs just to say you liked the figure
Now I can go big on a critique of TLDR, the most infuriating and insufferable of lazy online abbreviations in recent years. A cop-out and conscious choice for loss from lack of engagement is something I don't like. But that's a personal peeve. AUG's Stillsuit Paul is something I think I like. I think, but I don't own it yet.
Usually collectors who never even bought the figure they write about not liking. Or collectors hammering away at their keyboards to write protracted impassioned personal attacks. Have you read some of the (Jazzinc) threads lately?
Last edited:
- Joined
- Dec 1, 2017
- Messages
- 2,568
- Reaction score
- 1,706
I’m really happy for the folks who ordered this, I think this figure looks really good, particularly for the price!
I have the InArt Paul on order from Timewalker, but seeing how well this AugToys Paul came out, makes me very hopeful that they make Chani next!!
- Joined
- Dec 1, 2017
- Messages
- 2,568
- Reaction score
- 1,706
Noooooooo
MrConor212
Super Freak
They won’t be making a Chani. They’ve lost the license. The fact they haven’t announced a figure from it since May/June 2023 is a glowing neon sign
- Joined
- Dec 1, 2017
- Messages
- 2,568
- Reaction score
- 1,706
Unfortunate.
Did they announce that they no longer have the license?
Well, hopefully InArt will make a Chani and maybe even someone else like Feyd.
spaceghost2000
Super Freak
- Joined
- Nov 29, 2020
- Messages
- 726
- Reaction score
- 740
Nope, no announcement, just conjecture. I think most likely they held off on new announcements until they released the existing figures.
I wouldn’t expect a deep roster from InArt, maybe 1 more.
OmarColeccionador
Super Freak
- Joined
- Jan 25, 2016
- Messages
- 845
- Reaction score
- 620
Still waiting for my invoice 
olbertfrog
Super Freak
Yep me too from GIANTOY...weird... But should be any day now.
OmarColeccionador
Super Freak
- Joined
- Jan 25, 2016
- Messages
- 845
- Reaction score
- 620
Probably this is gonna be releasing next year like mid January/ February for everyone and Big Breda was just the classic inArt tactics ?
just guessing here but it seems that not even Chinese collectors have it yet
OmarColeccionador
Super Freak
- Joined
- Jan 25, 2016
- Messages
- 845
- Reaction score
- 620
abake
Rex Tremendae Majestatis
I would be perfectly content with that figure.
OmarColeccionador
Super Freak
- Joined
- Jan 25, 2016
- Messages
- 845
- Reaction score
- 620
More vids
robbiethepainter
Super Freak
If I was still collecting, I would definitely grab this. Looks great. Unfortunate that the license is getting spread around. This new company did a great job.
- Joined
- May 31, 2011
- Messages
- 19,883
- Reaction score
- 291
This is looking excellent.
Similar threads
