InArt: 1/6 Superman (Cavill)

Berry The Music Man · Friday at 12:59 PM

Some of the in art haters are kind of fanatical , myself I collect any and all brands that make the best figure for my collecting taste .

HyperDrive · Friday at 1:04 PM

Berry The Music Man said:
Some of the in art haters are kind of fanatical , myself I collect any and all brands that make the best figure for my collecting taste .

Agreed. Despite their figures having certain/some inaccuracies or inadequacies, they’re still producing the best stuff in the licensed and mass produced 1/6 game. Haters gonna hate though.

Dave_W · Friday at 1:59 PM

Berry The Music Man said:
Some of the in art haters are kind of fanatical , myself I collect any and all brands that make the best figure for my collecting taste .

Even with its avoidable flaws, its still better than HTs efforts. If and when HT makes their 2.0 and its better than this, I'll get that one as well.

Cvperez19 · Friday at 4:36 PM

I had the same issue with mine regarding the collar. It bothered me so much I just ended up gluing the suit over the holes and made sure to align it perfectly and now there is no unsightly gap where the cape slots in.

JorjeCroft said:
So got my fourth Superman… and he has a huge gap at collar. At first I thought suit was stretched and tried to rearrange but didn’t work. Then removed the suit and saw that one hole is higher than another which causes the wonk. Should I complain with Kit? He’ll roll his eyes lol
This is a complicated situation, if I’ll ask for replacement they need to send entire body as suit is glued on and I’m not going to remove it to switch the body. Sculpt is absolutely perfect.
View attachment 741318 View attachment 741319

HyperDrive · Friday at 4:52 PM

Dave_W said:
Even with its avoidable flaws, its still better than HTs efforts. If and when HT makes their 2.0 and its better than this, I'll get that one as well.

I think comparing back to Hot Toys’s prior releases isn’t fair despite them complacently reusing the same 2016 Cavill sculpt for their 2021 Knightmare 2-pack release.

I bet the prospective HT BvS 2.0 will be good. However, for me personally, I still prefer how In/Art makes their figures in the head-to-head matchups. Horrible example probably (I mean it makes sense to me lol) but it’s kinda like how I see vehicle models and makes. I’m a Mustang guy vs a Camaro guy despite thinking the Camaro has certain features that I prefer better than Mustang, but overall, I prefer Mustang’s design language. Or 4Runner (what I have) vs Wrangler. The Jeep does things better on the trails vs 4Runner, but it doesn’t matter to me, cause I prefer everything else about 4Runner and 4Runner is still great on the trails/mountain driving/etc.

Imo, the only real pros HT that IA doesn’t currently posses is their established reputation, decent and consistent QC and their ability to really nail a likenesses in terms of sculpt work when they do get it right (which is few and far between, imo). Every other facet of 1/6, I give it to IA.

JorjeCroft · Friday at 4:54 PM

I’ll probably do the same thing, once I put him on display. Annoying af and still can’t figure out what causes it. As others have said holes are molded. At first I thought one hole was higher than another and that was a reason for wonk, but probably I’m hallucinating idk.

Cvperez19 said:
I had the same issue with mine regarding the collar. It bothered me so much I just ended up gluing the suit over the holes and made sure to align it perfectly and now there is no unsightly gap where the cape slots in.

rory · 2024-12-21T18:10:20-0500

So great news for those, like me, who feel like IA's Superman shoulders are a little too narrow. The shoulder has a muscle plate that can pop off! Makes it super easy to mod. I popped off both plates (left and right) and just added a piece of foam 3M tape inbetween the shoulder and armor plate. This gave just enough extra width for my liking. NOT suggesting this is necessary, it's just my preference.

After modification.

Comparison shot. Modded (left) with Stock (right). The modded figure also has a Jaxxon cape.

rory · 2024-12-21T18:14:54-0500

I also noticed, having ordered two figures together from OSK, that one figure has better tailored sleeves with no bunching or loose spots out of the box. The other figure had wonky arms in the box and slightly baggier sleeves that I'm still trying to massage into better shape. In the picture above you can see the stock figure on the right with the slightly looser sleeves. I noticed this figure had the piece of plastic between armpit and arms in the box for protection, while the slightly better figure had a plastic sleeve over the whole bicep protecting it. So maybe different batches? It's not a big deal at all. Just mentioning the slight variations.

Hologram AI · 2024-12-21T18:15:10-0500

rory said:
So great news for those, like me who feel like IA's Superman shoulders are a little too narrow. The shoulder has a muscle plate that can pop off! Makes it super easy to mod. I popped off both plates (left and right) and just added a piece of foam 3M tape inbetween the shoulder and armor plate. This gave just enough extra width for my liking. NOT suggesting this is necessary, it's just my preference.

View attachment 745247

After modification.
View attachment 745248

Comparison shot. Modded (left) with Stock (right). The modded figure also has a Jaxxon cape.
View attachment 745252

Oh wow that’s pretty neat. Didn’t think it would just pop off the shoulder like armor. Will have to give this a try. Gives the narrow shoulders a much needed width boost.

Was removing the suit off the shoulders easy? Worried it might rip in the process. Appreciate you sharing this.

i_amjam · 2024-12-21T18:15:38-0500

rory said:
So great news for those, like me who feel like IA's Superman shoulders are a little too narrow. The shoulder has a muscle plate that can pop off! Makes it super easy to mod. I popped off both plates (left and right) and just added a piece of foam 3M tape inbetween the shoulder and armor plate. This gave just enough extra width for my liking. NOT suggesting this is necessary, it's just my preference.

View attachment 745247

After modification.
View attachment 745248

Comparison shot. Modded (left) with Stock (right). The modded figure also has a Jaxxon cape.
View attachment 745252

Receiving mine next week and will be doing this immediately. Glad it is simple to do!

rory · 2024-12-21T18:16:59-0500

i_amjam said:
Receiving mine next week and will be doing this immediately. Glad it is simple to do!

Very simple. The only nervous bit is pulling the suit down to do it. Those rubber trim pieces on the suit feel fragile.

rory · 2024-12-21T18:24:02-0500

Hologram AI said:
Oh wow that’s pretty neat. Didn’t think it would just pop off the shoulder like armor. Will have to give this a try. Gives the narrow shoulders a much needed width boost.

Was removing the suit off the shoulders easy? Worried it might rip in the process. Appreciate you sharing this.

I just went slow and pressed a thumb over the front collar when sliding it over the chest so as not to tear it when pulling it down.

shadows · 2024-12-21T18:46:14-0500

rory said:
I also noticed, having ordered two figures together from OSK, that one figure has better tailored sleeves with no bunching or loose spots out of the box. The other figure had wonky arms in the box and slightly baggier sleeves that I'm still trying to massage into better shape. In the picture above you can see the stock figure on the right with the slightly looser sleeves. I noticed this figure had the piece of plastic between armpit and arms in the box for protection, while the slightly better figure had a plastic sleeve over the whole bicep protecting it. So maybe different batches? It's not a big deal at all. Just mentioning the slight variations.

glad mine had plastic over bicep if it’s a later batch

Gipetto0812 · 2024-12-21T18:52:09-0500

Great find @rory :clap

looks so much better now

rory said:
I also noticed, having ordered two figures together from OSK, that one figure has better tailored sleeves with no bunching or loose spots out of the box. The other figure had wonky arms in the box and slightly baggier sleeves that I'm still trying to massage into better shape. In the picture above you can see the stock figure on the right with the slightly looser sleeves. I noticed this figure had the piece of plastic between armpit and arms in the box for protection, while the slightly better figure had a plastic sleeve over the whole bicep protecting it. So maybe different batches? It's not a big deal at all. Just mentioning the slight variations.

Probably different batches as I think InArt said the plastic between the armpit would be changed out after someone posted a pic on their FB about the damage their figure incurred from taking off those small plastic pieces. I haven’t taken them off mine as I’m hesitant but I guess I should in case I need to get a replacement

rory · 2024-12-21T19:08:34-0500

Gipetto0812 said:
Great find @rory looks so much better now

Probably different batches as I think InArt said the plastic between the armpit would be changed out after someone posted a pic on their FB about the damage their figure incurred from taking off those small plastic pieces. I haven’t taken them off mine as I’m hesitant but I guess I should in case I need to get a replacement

Yeah, my plastic sleeve slid right off, no sticking at all. The one with the tiny plastic squares however, peeled off. Granted it didn't stick or damage the suit or anything. But I could see how it could for some.

HyperDrive · 2024-12-21T19:15:22-0500

I can also see why/how people would’ve torn it off but just go gentle… lol.

JorjeCroft · 2024-12-21T19:28:25-0500

HyperDrive said:
I can also see why/how people would’ve torn it off but just go gentle… lol.

It fall off immediately I took the figures out. Wasn’t glued on at all. I think whoever had that issue heated the hands with hairdryer and melted down the entire thing. I put tapes back and put in the closet lol

Hologram AI · 2024-12-21T19:37:06-0500

rory said:
I just went slow and pressed a thumb over the front collar when sliding it over the chest so as not to tear it when pulling it down.

For the 3M foam, did you just use something like this?

https://www.amazon.com/Urethane-Adhesion-Polyurethane-Attaching-Nameplates/dp/B0D128W9B1?th=1

Angelo2113 · 2024-12-21T21:14:51-0500

Dave_W said:
Even with its avoidable flaws, its still better than HTs efforts. If and when HT makes their 2.0 and its better than this, I'll get that one as well.

I would love to see Hot Toys develop a 2.0 with their best effort but I wouldn't be surprised if they scrap it in favor of the new movie design. Especially considering how well the trailer itself is being received on social media.

Which makes me super happy to have the InArt version.

rory · 2024-12-21T21:17:17-0500

Hologram AI said:
For the 3M foam, did you just use something like this?

https://www.amazon.com/Urethane-Adhesion-Polyurethane-Attaching-Nameplates/dp/B0D128W9B1?th=1

Yep that looks like the stuff

InArt: 1/6 Superman (Cavill)

Help Support Collector Freaks Forum:

Super Freak

Super Freak

Crying in my safe space

Freakzoid

Super Freak

Super Freak

Super Freak

Super Freak

Super Freak

Super Freak

Super Freak

Super Freak

Freakzoid

Super Freak

Super Freak

Super Freak

Super Freak

Super Freak

Super Freak

Super Freak

Similar threads