IANS HOT TOYS REPAINTS , MODS & DIORAMAS

[IANR]

hi, i spent too long trying to get the mk5 suit up pieces over the racesuit & failed to get them to close so i took my thinnest body sanded down the arm muscles & put it into my dj customs set but with the suit up head then put the dj helmet & 3rd party head on the ht racesuit. so i now have the suit up complete that will never be changed & a brand new helmeted racesuit tony.

 

[IANR]

most dissapointing figure ive had since tony team suit , so inflexible even the hips .had they made the arm fabric seperate to the body that would be something & no torso twist . anyway if shes just going to be standing i thought i would upgrade the lights so i dont have to remove 2 effect pieces plus vambraces so i ran a set of 10 copper wire party lights from left to right hand over the vambraces with box at back (4 in each round effect ,2 behind back) this mod is easily removed & causes no damage. all the best ian.

 

[IANR]

currently for sale on ebay uk only. 1/6 CUSTOM DIORAMA GATEWAY DOOR SCREEN FOR HOT TOYS FIGURES. MEASURES 20 X 12 X 8'' DEEP. LIGHTWEIGHT, SCREEN COULD BE REMOVED /CUT TO MAKE AN OPENING GATE OR ADDED INTO A LARGER WALL, FAUX MARBLE PATTERN FLOOR.

 

[IANR]

currently for sale on ebay uk only 1/6 CUSTOM DIORAMA BATCAVE ASGARD ALIEN PILLARS 19.5 X 15 X 15.5'' DEEP. LIGHT ENOUGH FOR GLASS SHELVES, BREAKS DOWN INTO 5 PIECES , WEATHERED ROCKS WITH SEALED GRAVEL NEXT TO THE GOLD BANDS OF A MYSTERIOUS SYMBOL. THANKS TO OILERS WORKSHOP FOR THE PILLAR CUTTING TECHNIQUES.

 

[IANR]

Alleyway diorama 20 X 17 X 12'' deep, handmade nearly all xps foam no 3d printed pieces all 3 sides are just held in by the 3 pavement pieces so i can change a wall later. the large gate was most fun to carve out & texture.

 

[IANR]

hot toys mk46 concept art with mk50 shield & topps toys tony head just for fun.

 

[JacktheRipper]

That alleyway is by far my favorite. The one piece that makes it lose the illusion are the chains and locks on the doors. They seem out of scale; I might be wrong. Nice work, however.

 

[IANR]

for sale on ebay uk only. 1/6 CUSTOM DIORAMA BATTLE DAMAGED STREET,PIPES,WATER,FOR HOT TOYS DETOLF 15 X 12 X 5'' LIGHTWEIGHT, 2'' DENSE FOAM BASE (YOU CAN INSERT SUPPORT POLES/RODS FOR FIGURES) DETAILED BRICK/STONE/RUBBLE. CRATERS FULL OF WATER & GUSHING PIPE AT REAR NEXT TO MAINS POWER CABLES. JUST ADD A PHOTOCOPY BACKGROUND.

 

[IANR]

Endgame patriot is a great figure but there is a lot of plain silver so i used tamiya clear colours to add orange blue & green to the missile pods / red to the barrel tips / orange on the sides of largest guns & forearm missile tips plus blue on sides . i used the spare smaller guns on the forearms (they have the red covers)

 

[IANR]

hi mods to endgame hawkeye deluxe . belt from coat added above other belt, coat added , 3 coil wristguard added over vambrace, wrist bow altered to fit over other vambrace, quiver ground out so all arrows will fit at a lower level, scabbard slides through strap with dagger inside. i found the coat zip crazy tight so applied silicon grease carefully & that worked.

 

[IANR]

for sale on ebay uk only HI WITH ALL THE NEW WOLVERINE VERSIONS BEING RELEASED I THOUGHT I WOULD MAKE THESE NICE SIMPLE WOOD ON FOAM BACKDROP PANELS SEALED WITH PVA & MEASURING 15 X 9 X 1''

 

[IANR]

1/6 CUSTOM DIORAMA BATTLE SCENE HOT TOYS WOLVERINE X-MEN 14 WIDE X 12 X 12'' PHOTOS SHOW FIGURES STANDING WITHOUT STANDS BUT WIRES/POLES CAN BE INSERTED INTO THE THICK FOAM BASE. TEXTURED & WEATHERED ROCKS DRY BRUSHING WITH SILVER & COPPER ON X-MEN SYMBOL. INCLUDES 4 EXTRA DEBRIS PIECES.

 

[IANR]

CUSTOM I/6 DIORAMA BROKEN ROAD 15.5 X 11 X 7'' LIGHTWEIGHT 2''DENSE FOAM SO SUPPORTS & POLES CAN BE INSERTED ,THOUGH POSES SHOWN ARE WITHOUT THEM.

 

[IANR]

1/6 BUILDING DIORAMA FOR HOT TOYS. 16'' WIDE X11'' DEEP X26'' TALL. ALL WOOD CARCASS WITH CARVING FOAM WEATHERED FASCIA ,HAS 18 HOLES TO FIT STRAIGHT /FLEXIBLE OR ACRYLIC FLIGHT POLES ON ITS 3 LEVELS . WOODEN WINDOWS & METAL DRAINPIPES. WOULD LOOK COOL WITH A DOZEN SPIDEYS IN CRAZY POSES.

 

[IANR]

Picked up an 'ant man & the wasp' figure & he's currently annoying tony in his workshop. i know theres hate for that headsculpt but i like it.

 

[IANR]

for an ebay custome a 1/6 scale log for the john matrix arnie commando figure, heavily textured with 6 shades of brown,some green towards one end & some black wash on the other end. fun to make.

 

[IANR]

a custom damaged road & pavement but very thin profile for hulkbuster

 

[IANR]

had a few new items arrive since last rearrange so added in the bw black widow , eg hawkeye, a custom grey suited tony,antman in the lab & a tom cruise head for the mk85. i know figures are squashed in this section but i rotate them regularly to the front.

 

[IANR]

for sale on ebay uk only. 1/6 CUSTOM BATTLE DAMAGED EUROPEAN STREET SCENE 15 WIDE X 12 DEEP X 15.5'' TALL . ONCE GRAND BUILDING WITH COLOURFUL ORNAMENTAL BRICKWORK ,BOARDED CELLAR WINDOWS ,SHELL & BULLET HITS ,EXPOSED REBAR & FALLEN FIXED DEBRIS, FULLY SEALED & WEATHERED. LIGHT ENOUGH FOR DETOLF.

 

[IANR]

for sale on ebay uk only. 1/6 CUSTOM DIORAMA ROCK BASE OR SILO TOP . 8'' TALL X 10'' DEEP X 11'' WIDE WITH 7'' HOLE FOR POWER POSE STANDS LIKE MK42/45/47/PEACEMAKE/RED SNAPPER OR COMIC ORIGINS OR THE ROUND BLACK STYLE. ==SMOKE PET FREE HOME, NO FIGURES OR STANDS INCLUDED ==