InArt: The Lord of the Rings - Aragorn 1:6

[chrisstbh]

Photos don't do it justice.
Kneeling unaided.
The sword is so sharp it pierced the plastic in its travel to Oz.

If InArt can keep the bar high with Legolas,i feel Boromir SHOULD be done!!
Would be such a huge win for collectors if they can keep the sculpts THIS great!

Time to get back to reality now.
Will upload these last few pics and come back at a later date once I've kitted him out.

AMAZING figure!!!
View attachment 738615View attachment 738616View attachment 738617View attachment 738618View attachment 738619View attachment 738620View attachment 738621

I think your head is on too high

 

[HyperDrive]

OSK. Kit was very helpful and I'm glad that he covers the shipping costs to Inart and back to me .

OSK is the best. Will definitely take care of you as long as the product is legitimately defective from the factory.

 

[vspectra]

OSK. Kit was very helpful and I'm glad that he covers the shipping costs to Inart and back to me .

what was the $50 for?

 

[Spiln3r]

OSK. Kit was very helpful and I'm glad that he covers the shipping costs to Inart and back to me .

It's weird, I also have problems with my Aragorn HS (the worst I've seen among all the receptions ) I was in the 1st batch, so I have been waiting for a long time (since September 12) and I still have no news of the replacement, I did not have to return my HS either

 

[Jaro]

what was the $50 for?

For the shipping from my location in Germany Back to OSK.

 

[Jaro]

It's weird, I also have problems with my Aragorn HS (the worst I've seen among all the receptions ) I was in the 1st batch, so I have been waiting for a long time (since September 12) and I still have no news of the replacement, I did not have to return my HS either

Oh, that doesn't sound so promising. What defects did your head have exactly?

 

[Spiln3r]

Oh, that doesn't sound so promising. What defects did your head have exactly?

You have certainly already seen it before even if I have not yet published it massively on social networks, I am waiting for the response from InArt which apparently does not arrive..
I think I'll contact Kit this week

 

[IAmIronMan]

Sad to say the same thing happened to mine. It arrived with a foot peg that wasn't glued onto the shoe. I didn't take the HS out of the container because I was waiting to hear back about the foot. When I finally did because they asked me to try gluing the part that the peg goes into on the shoe myself (wasn't going to work, if you've seen the boot, there is no way to glue something in the foot part with the height of the boot) I also noticed my sculpt has the exact same chip on the nose. Kit is going to open a case with them about it but I will also have to ship it to them on my own dime. I'm in the states and haven't priced it yet but I'm sure it'll be at least $50 to HK.

Kit has been amazing and I understand QC issues, they happen, but their handling of them is kind of off putting for how much they are charging. This is my third figure from InArt and I have 4 more on order but this does give me pause for any other figures from them.

 

[ObiGlennKenobi]

I think your head is on too high

oh really?
weird cause I just put the neck peg in as far as it would go,and then the sculpt on top of it.
I'll have a look next time I have time to unbox all the other stuff,along with the peg to make sure I've pushed down far enough.
cheers mate.

 

[Sassafras]

Sad to say the same thing happened to mine. It arrived with a foot peg that wasn't glued onto the shoe. I didn't take the HS out of the container because I was waiting to hear back about the foot. When I finally did because they asked me to try gluing the part that the peg goes into on the shoe myself (wasn't going to work, if you've seen the boot, there is no way to glue something in the foot part with the height of the boot) I also noticed my sculpt has the exact same chip on the nose. Kit is going to open a case with them about it but I will also have to ship it to them on my own dime. I'm in the states and haven't priced it yet but I'm sure it'll be at least $50 to HK.

Kit has been amazing and I understand QC issues, they happen, but their handling of them is kind of off putting for how much they are charging. This is my third figure from InArt and I have 4 more on order but this does give me pause for any other figures from them.

InArt's attitude towards its customers in the event of a problem is ridiculous IMO - expecting the customer to absorb the cost for a "premium" figure and to resolve any issues. Especially for a relatively new company who takes forever to deliver. Good images and proof of purchase should be all that's needed, like with Sideshow.

Just makes it easier to NOT order from them; their customer service is hardly "premium". If I ever order from them again, I know ahead of time it's sort of a gamble.

 

[DEATHASYLUM]

Some quick iPhone pics of my figures. I haven’t set up the sculpted hair version yet, but it’s nice to have both options. Thanks to my buddy jimmie_dimmick that decided to part with it

 

[batsheva]

InArt really elevates those characters to a different level. Best 1/6 rendition of Gandalf and Aragorn!

 

[skullboy]

You have certainly already seen it before even if I have not yet published it massively on social networks, I am waiting for the response from InArt which apparently does not arrive..
I think I'll contact Kit this week
View attachment 738709

Tag them on facebook with the picture, they will respond very quickly you watch

 

[skullboy]

Sad to say the same thing happened to mine. It arrived with a foot peg that wasn't glued onto the shoe. I didn't take the HS out of the container because I was waiting to hear back about the foot. When I finally did because they asked me to try gluing the part that the peg goes into on the shoe myself (wasn't going to work, if you've seen the boot, there is no way to glue something in the foot part with the height of the boot) I also noticed my sculpt has the exact same chip on the nose. Kit is going to open a case with them about it but I will also have to ship it to them on my own dime. I'm in the states and haven't priced it yet but I'm sure it'll be at least $50 to HK.

Kit has been amazing and I understand QC issues, they happen, but their handling of them is kind of off putting for how much they are charging. This is my third figure from InArt and I have 4 more on order but this does give me pause for any other figures from them.

Lets see if they approve this, I know they are admin on this group.

 

[skullboy]

InArt's attitude towards its customers in the event of a problem is ridiculous IMO - expecting the customer to absorb the cost for a "premium" figure and to resolve any issues. Especially for a relatively new company who takes forever to deliver. Good images and proof of purchase should be all that's needed, like with Sideshow.

Just makes it easier to NOT order from them; their customer service is hardly "premium". If I ever order from them again, I know ahead of time it's sort of a gamble.

Agree totally. Slowly but surely I seem to be changing the way I feel about them as a company.

 

[Zbond10]

Some more photos, can’t wrap my head around how perfect he is. Fully hyped for Legolas!