reelism
Freakzoid
hi all I have a few sideshow figures I would like to swap out the bodies for truetypes (narrow). anyone know where I can find an existing thread on attaching a sideshow head to a true type body?
info on connecting a truetype (narrow) with sideshow head
- Thread starter reelism
- Start date
Help Support Collector Freaks Forum:
MarfMaster
Super Freak
- Joined
- Sep 16, 2009
- Messages
- 13,329
- Reaction score
- 40
As far as I know, the heads and neck adapters are completely compatible.
If it's a Sideshow Pro body based figure, then yes, they are compatible. However, if it is from their older buck body based (with sculpted neck), it may fit a bit loose. I've put a Sideshow Jason 2 head sculpt on a TT and had to add some "stuffing" inside the neck to be more secure so it will not fall off so easily.
reelism
Freakzoid
i see. the 2 sideshow bodies are luke bespin and the T2 T800... I assume these are the old buck bodies... the TT neck posts leave a lot of play and the sideshow heads a prone to falling off. never heard of stuffing the ssc neck... I have heard clear plumbers tape is an option... I wonder if gluing the TT to the ssc head would be a better more permanent alternative. thanks for the help freaks
Similar threads
