If yo talk about the seam on the tail, it has been removed so don't worry! Congratulations for getting this piece!
Statue Mamegyorai---1/3 scale ALIEN Quadrilogy Statues
- Thread starter darkmummy
- Start date
Help Support Collector Freaks Forum:
If yo talk about the seam on the tail, it has been removed so don't worry! Congratulations for getting this piece!
Python
Super Freak
BurningRage
Super Freak
joern.ishikawa
Freakzoid
It's one piece. They recently changed it.
https://mamegyorai-alien-project.blogspot.com/2019/05/13.html
Plus they have tons of good pictures and other information in their blog.
https://mamegyorai-alien-project.blogspot.com
https://mamegyorai-alien-project.blogspot.com/2019/05/13.html
Plus they have tons of good pictures and other information in their blog.
https://mamegyorai-alien-project.blogspot.com
- Joined
- Jul 8, 2012
- Messages
- 1,588
- Reaction score
- 360
Saw this and immediately fell in love
Sent from my SAMSUNG-SM-G930AZ using Tapatalk
Sent from my SAMSUNG-SM-G930AZ using Tapatalk
clutch
Super Freak
The dome is an issue as well as the price.
abake
Rex Tremendae Majestatis
Saw this and immediately fell in love
Sent from my SAMSUNG-SM-G930AZ using Tapatalk
Whoever set that statue up must hate the company...
Not only is the dome not attached properly, they also have one of the back tubes facing the wrong way...
- Joined
- Jul 8, 2012
- Messages
- 1,588
- Reaction score
- 360
The gap on the face
Sent from my SAMSUNG-SM-G930AZ using Tapatalk
Sent from my SAMSUNG-SM-G930AZ using Tapatalk
clutch
Super Freak
Ugh that airbrush work at the top of the head...
clutch
Super Freak
And what is the final solution for the dome of a $2000+ statue? Double-sided tape...
https://mamegyorai-alien-project.blogspot.com/2019/08/13.html?m=1
https://mamegyorai-alien-project.blogspot.com/2019/08/13.html?m=1
Xeno Junkie
Super Freak
- Joined
- Oct 31, 2013
- Messages
- 1,694
- Reaction score
- 591
Need a translation for that page to see what it actually says.
There’s no way they’re going to use double sided tape on this piece.
clutch
Super Freak
What part of this do you not understand?
Xeno Junkie
Super Freak
- Joined
- Oct 31, 2013
- Messages
- 1,694
- Reaction score
- 591
What part of this do you not understand?
Ohhh, I missed that.
Indeed that’s a bit of a head scratcher. The questions surrounding this piece have kept me from ordering and now I’m a bit relieved I’ve held off on it so far. Like, tape... really?
clutch
Super Freak
Chrome translation:
It was postponed and it was a plan of July release ......, but I am very sorry, I postponed further and it was overshot in August.
The 1/3 Scale Big Chap Statue, which was really waiting, is finally on sale.
This year, I went to China almost every month except the Chinese New Year and continued inspection.
I am sorry for the topic, but I set up a tie to wear an alien T-shirt during inspection. It is important to enter from the form ....
(In the photo above, I am wearing the “mpc plastic model manual T-shirt”) In order to
inspect the entire body, you have to turn around the pedestal, but the alien body is over 15 kg There are hundreds of them around and shoulders, so the left shoulder still does not rise above the shoulder height. I knew the fear of a large statue.
It was hard both mentally and physically, but I did as much as I could. All you have to do is look after it.
I like the big chaps I see where the sun shines
I really apologize for not updating my blog completely.
There is no room for explanation.
There is a specification of the food as a content that could not be told.
It is a problem that the hood floats, but I think that it has almost not floated though there are individual differences. By making the above jig, the problem was solved considerably.
So, I made the hood a separate part specification.
When the package has been opened, it is already separated.
A double-sided tape is also included for cases where the tip of the nose is floating.
This is a double-sided tape that is cut like Baumkuchen.
The tape itself is transparent
A small sponge sticks inside the last head of the hood.
The possibility of the sponge peeling off during transport is not zero, so if the hood doesn't fit exactly, check the sponge on the back of the back of the head.
And since the pose is a pose, you need to assemble it carefully.
When assembling, it is safe to put vinyl etc. between the torso and arms, tail and legs & pedestal and pull out the vinyl after assembling. Vinyl is okay with the statue body wrapped around. Use vinyl wherever possible!
In fact ... For the
past 20 days, the Fujimasa-colored deco-mass that has been on display at the Mamegyorai Koenji store has been replaced by the product version.
Which is either
I sent one of them with Fedex, and I thought that someone would notice it.
No one pointed out, and the store staff didn't notice if they were secretly replaced on a regular holiday.
What kind of impression can you have?
Half fun and half anxiety. Honestly it seems to vomit with tension
I hope you will be pleased ....
Harada Preskin
It was postponed and it was a plan of July release ......, but I am very sorry, I postponed further and it was overshot in August.
The 1/3 Scale Big Chap Statue, which was really waiting, is finally on sale.
This year, I went to China almost every month except the Chinese New Year and continued inspection.
I am sorry for the topic, but I set up a tie to wear an alien T-shirt during inspection. It is important to enter from the form ....
(In the photo above, I am wearing the “mpc plastic model manual T-shirt”) In order to
inspect the entire body, you have to turn around the pedestal, but the alien body is over 15 kg There are hundreds of them around and shoulders, so the left shoulder still does not rise above the shoulder height. I knew the fear of a large statue.
It was hard both mentally and physically, but I did as much as I could. All you have to do is look after it.
I like the big chaps I see where the sun shines
I really apologize for not updating my blog completely.
There is no room for explanation.
There is a specification of the food as a content that could not be told.
It is a problem that the hood floats, but I think that it has almost not floated though there are individual differences. By making the above jig, the problem was solved considerably.
So, I made the hood a separate part specification.
When the package has been opened, it is already separated.
A double-sided tape is also included for cases where the tip of the nose is floating.
This is a double-sided tape that is cut like Baumkuchen.
The tape itself is transparent
A small sponge sticks inside the last head of the hood.
The possibility of the sponge peeling off during transport is not zero, so if the hood doesn't fit exactly, check the sponge on the back of the back of the head.
And since the pose is a pose, you need to assemble it carefully.
When assembling, it is safe to put vinyl etc. between the torso and arms, tail and legs & pedestal and pull out the vinyl after assembling. Vinyl is okay with the statue body wrapped around. Use vinyl wherever possible!
In fact ... For the
past 20 days, the Fujimasa-colored deco-mass that has been on display at the Mamegyorai Koenji store has been replaced by the product version.
Which is either
I sent one of them with Fedex, and I thought that someone would notice it.
No one pointed out, and the store staff didn't notice if they were secretly replaced on a regular holiday.
What kind of impression can you have?
Half fun and half anxiety. Honestly it seems to vomit with tension
I hope you will be pleased ....
Harada Preskin
Xeno Junkie
Super Freak
- Joined
- Oct 31, 2013
- Messages
- 1,694
- Reaction score
- 591
Tape... freaking double sided tape. Sigh...
Python
Super Freak
Oh dear, it could potentially yellow over time, or even lose it's adhesiveness and allow the dome to drop off at some point down the line.
That aside, the body is described as 15KG which is a serious amount of mass. I do hope this has a strong metal core it it could begin to lean (more than the intended pose)
I love this thing and it's clearly a passion project for him. I'm just not filled with confidence given the price for the privilege of owning one. I've been seriously considering this, but I may wait and see what Prime 1 come up with.
That aside, the body is described as 15KG which is a serious amount of mass. I do hope this has a strong metal core it it could begin to lean (more than the intended pose)
I love this thing and it's clearly a passion project for him. I'm just not filled with confidence given the price for the privilege of owning one. I've been seriously considering this, but I may wait and see what Prime 1 come up with.
Xeno Junkie
Super Freak
- Joined
- Oct 31, 2013
- Messages
- 1,694
- Reaction score
- 591
Totally agree on all points. Especially the one about waiting on Prime1.
abake
Rex Tremendae Majestatis
I understand the worries, but looking at that thing assembled, it really is pure beauty. If I had the money, I wouldn't hesitate.
Maybe I'm missing something (I ought to be, since this is just a clumsy Chrome translation), but why not just glue the dome onto the head at the factory...?
Similar threads
