Reinhardt
Super Freak
Just sick!!
Official HT Predator 2 image thread
- Thread starter Les Walker
- Start date
Help Support Collector Freaks Forum:
jkno
Stormtrooper
guard the two photos on your computer
then open it with the display of pictures and move back and forth
you can see better the differences
The difference between the 2 helmets is huge, the first one (the HT one) looks too rusty, too damaged like an old relict.
more shots
guard the two photos on your computer
then open it with the display of pictures and move back and forth
you can see better the differences
interesed send MP
guard the two photos on your computer
then open it with the display of pictures and move back and forth
you can see better the differences
interesed send MP
Hly crap, I can't believe I missed this awesome bio mask! this looks amazing.
Here's a paint job to go with that amazing mask. I painted this up for P. You can see more pics of it in my customs thread (link in my signature).
photos of the finished mask first. prepared for its owner
soon makes another five
Here's a paint job to go with that amazing mask. I painted this up for P. You can see more pics of it in my customs thread (link in my signature).
RUMADMAN
Super Freak
dam i need one of them bios as well. really great work. so who is selling them??
prefused
Super Freak
- Joined
- Apr 4, 2008
- Messages
- 4,524
- Reaction score
- 0
whoa, that looks better than a prototype! i really need to get back into getting my toys awesomeized.Here's a paint job to go with that amazing mask. I painted this up for P. You can see more pics of it in my customs thread (link in my signature).
*glares awkwardly down at my signature...*
Russell1982
Super Freak
Awesome. Is that the P1 body? I love that paint job, the paint design on the actual figure is rubbish. In the sense that it doesnt match what he was actually like in the film. Haha. But that looks awesome up there.
yep, that's the P1 body. go to the link in my signature for many more pics of it.
AAH!!!!!!! THAT LOOKS GORGEOUS! The ideal Predator 2 paint-up. Must... have...
Kind of looks like Snake with the striping, but it works!
Kind of looks like Snake with the striping, but it works!
Russell1982
Super Freak
Thats cos its like the actual paint job on the suit in the movie. Would love to have a P1 body painted up like this for my P2. Would make it look so much better.
I was sceptical before but after looking again I agree your mask is better. I still like the Hot Toys original, they did a much better job on that one than they did on the P1 mask IMO. What do you think?
Anyway great job!
Glad you guys like it. If Sideshow ever does a 1/4 Predator 2, I hope I get to paint it.
Darth_Fatso
Super Freak
It kills me that I didn't even know about Hot Toys when this figure was released. Hopefully one day I'll own a nice 1/6 P2 Pred.
Biojex
Super Freak
- Joined
- Aug 25, 2008
- Messages
- 23,682
- Reaction score
- 173
Hly crap, I can't believe I missed this awesome bio mask! this looks amazing.
Here's a paint job to go with that amazing mask. I painted this up for P. You can see more pics of it in my customs thread (link in my signature).
had to be bumped. that is a fantastic job.
Optimatron
Super Freak
Hey fellas...sorry to hit up two threads with this, but I didn't see a feedback thread on this forum, and I need some help. I also figured since the Guardian and P2 share the same body this might be the best place to ask.
I love my new Guardian, but I already had something break off. The thigh guard on his left leg has popped off, and will not stay on very well when reapplied. Has anyone ever had this type of problem with the P2 body? I am new to these figures, and while I'm usually good at modifying and customizing transformers...I'm not really sure how to get this back on and make it stay, while maintaining poseability in the leg. I feel if I glue it back on, its still going to pop off anytime I want to pose the left leg. Are there any feedback forums that someone could direct me to? I'd really like to put this thigh armor back on permanently, and still retain the ability to pose the legs.
My other problem with this guy is that his wrist blade gauntlet is really loose unless I push it up further on his forearm towards his elbow. Even this is only a temporary solution as the gauntlet always slides back down and becomes loose. I noticed that the netting is switched between the P2 and Guardian. It seems that on the P2 the netting covered his right arm, whereas the netting now covers the Guardian's left. Does anyone have any suggestions on tightening the grip of the gauntlet on the forearm? Thanks in advance to anyone who can lend me some advice or point me in the right direction.
Also...just gotta say...I already did the hairdryer mod on his dreads, and they look way better. I swear when he came out of the box he reminded me of a porcupine, or Sonic the Hedgehog on a bad hair day.
I love my new Guardian, but I already had something break off. The thigh guard on his left leg has popped off, and will not stay on very well when reapplied. Has anyone ever had this type of problem with the P2 body? I am new to these figures, and while I'm usually good at modifying and customizing transformers...I'm not really sure how to get this back on and make it stay, while maintaining poseability in the leg. I feel if I glue it back on, its still going to pop off anytime I want to pose the left leg. Are there any feedback forums that someone could direct me to? I'd really like to put this thigh armor back on permanently, and still retain the ability to pose the legs.
My other problem with this guy is that his wrist blade gauntlet is really loose unless I push it up further on his forearm towards his elbow. Even this is only a temporary solution as the gauntlet always slides back down and becomes loose. I noticed that the netting is switched between the P2 and Guardian. It seems that on the P2 the netting covered his right arm, whereas the netting now covers the Guardian's left. Does anyone have any suggestions on tightening the grip of the gauntlet on the forearm? Thanks in advance to anyone who can lend me some advice or point me in the right direction.
Also...just gotta say...I already did the hairdryer mod on his dreads, and they look way better. I swear when he came out of the box he reminded me of a porcupine, or Sonic the Hedgehog on a bad hair day.
Last edited:
Devil_666
Super Freak
Just so you know, the Guardian Predator uses the P1 body, not the P2/Elder Body.
Left Leg Armor: It happened on my P2. I glued it but it would still pop off like you said. The way I fixed mine (and kept the ability for it to move) was I glued a small cable tie wrap like this:
..to that piece of armor. Then I slid the end of the tie wrap up and under the armor between the hip. You might have to cut some excess off.. but the armor is pretty snug near the hip so it's tight enough to hold in place. I put a slight bend in the tie wrap so the armor would sit closer and more accurately to the leg like the real movie armor. That's the added advantage of this mod.
Here's a pic of my P2, you can see what I mean about the armor now:
Loose Gauntlets: Easy fix. Remove them and wrap the arms with plumbers tape.
Wrap up the forearm a little and then test fit the gauntlet.
Left Leg Armor: It happened on my P2. I glued it but it would still pop off like you said. The way I fixed mine (and kept the ability for it to move) was I glued a small cable tie wrap like this:
..to that piece of armor. Then I slid the end of the tie wrap up and under the armor between the hip. You might have to cut some excess off.. but the armor is pretty snug near the hip so it's tight enough to hold in place. I put a slight bend in the tie wrap so the armor would sit closer and more accurately to the leg like the real movie armor. That's the added advantage of this mod.
Here's a pic of my P2, you can see what I mean about the armor now:
Loose Gauntlets: Easy fix. Remove them and wrap the arms with plumbers tape.
Wrap up the forearm a little and then test fit the gauntlet.
seniram6
Super Freak
does anybody know a trick to tighten joints on the figure? I just got one that was put together but the right arm's joint is really loose.
Optimatron
Super Freak
So I guess it's a P1 body, with P2 armor? I just figured it was a P1 head and a P2 body because of the armor. Interesting...oh well, I effin' love this guy.
BTW, thanks a ton for the advice. I'm going to try that out tomorrow. I really like how the thigh guard looks in the picture of your P2.
Last edited:
Reinhardt
Super Freak
Hey Devil, your thigh armor mod looks awesome, but I still don't get how you did it. Where is the strap in that picture? Thanks!
Similar threads
