uscmhicks
Super Freak
Oh I agree. From personal experience I just think PCS do much better when the ES is low.
Sent from my SM-G981B using Tapatalk
Statue PCS: Halloween - Michael Myers 1:4
- Thread starter Shoo
- Start date
Help Support Collector Freaks Forum:
Sent from my SM-G981B using Tapatalk
Agreed. Although nowhere near prototype quality, perhaps with better lighting and hair styling...Also anything in this scale will have a distorted look if held to face level. This could still work (for me)...just need more and better pics.
mistermark
Super Freak
Why does a ten dollar Barbie come with styled hair yet PCS can't do it for 600 dollars? It's obvious the proto uses styled mohair and the in hand uses dollar store fake fur. I'm sick of the bait and switch. Also, if the base pics are oversprayed/ruined like we saw, they need to redo them handpainted. Did you see the base pics compared side to side with proto? Horrible bait and switch. PCS needs to redo a replacement mask PROPERLY, like the prototype and fix the base issue PROPERLY and then I'll buy. I'm not buying this for $600 and will buy from companies like Sideshow/Blitzway who get it right. I hope those of you that get this are happy. I see potential when the issues are corrected. This is 600 dollars not 60 bucks, sorry not buying. Needs a new mask like what we saw on proto and a properly painted base
I can hear their BS excuse now "We couldn't use mohair because of Covid," No, you didn't use it because you were cutting corners for profit on a 600 dollar statue. Oh well. I hope you guys will be happier with it than I would be
I can hear their BS excuse now "We couldn't use mohair because of Covid," No, you didn't use it because you were cutting corners for profit on a 600 dollar statue. Oh well. I hope you guys will be happier with it than I would be
Last edited:
kingkarl
Freaked Out
I have got 2 more flex payments to go yet thank god.
When I see more pictures when others get it I will then make my decision to either get a full refund or keep it.
If these pictures are true then they can shove it up their arse sideways.
When I see more pictures when others get it I will then make my decision to either get a full refund or keep it.
If these pictures are true then they can shove it up their arse sideways.
EStark
Freaked Out
- Joined
- Nov 26, 2020
- Messages
- 241
- Reaction score
- 22
Crappy photos still, look at the counter angled up. And everything around the statue distorted. Even the other statue looks bad.
Sent from my iPhone using Tapatalk
mistermark
Super Freak
- Joined
- Mar 16, 2013
- Messages
- 1,552
- Reaction score
- 9
Fullscale
Freakalicious
- Joined
- Jan 1, 2021
- Messages
- 21
- Reaction score
- 0
This is Matt from the PCS group. Here's Ant's post.
"Ok, this should clear everything up on Myers 1:4 production head. First, a quick summary. Everyone loved the 1:3 Myers head. We used the EXACT same Myers head for the 1:4 Myers prototype (why would we change a good thing). 3D printing made that easy. We then used the 1:4 prototype head for the 1:4 production. Again, why would we change a good thing. Now for picture proof.
Photo with 5 Myers heads. Two on the left are the prototypes. The far left is a black and white version we haven't released. 3 heads on the right are production heads. No change from prototype.
Photo with two white heads. That is the prototype and unpainted factory sample. Even though one is turned slightly left in the pic and one slightly right (you can tell my how much ear is visible) they are the same head.
Photo with 3 heads. Prototype in the middle and factory production on the left and right. Same head.
Photo with 2 heads in color. Right is the prototype and left is production prior to final paint details (blending/shadowing). Again same head. Eyes not inserted in that example of course.
That should help clear everything up. I've reached out to the factory for a production sample so we can do an unboxing as well. Hoping to have it next week.
"Ok, this should clear everything up on Myers 1:4 production head. First, a quick summary. Everyone loved the 1:3 Myers head. We used the EXACT same Myers head for the 1:4 Myers prototype (why would we change a good thing). 3D printing made that easy. We then used the 1:4 prototype head for the 1:4 production. Again, why would we change a good thing. Now for picture proof.
Photo with 5 Myers heads. Two on the left are the prototypes. The far left is a black and white version we haven't released. 3 heads on the right are production heads. No change from prototype.
Photo with two white heads. That is the prototype and unpainted factory sample. Even though one is turned slightly left in the pic and one slightly right (you can tell my how much ear is visible) they are the same head.
Photo with 3 heads. Prototype in the middle and factory production on the left and right. Same head.
Photo with 2 heads in color. Right is the prototype and left is production prior to final paint details (blending/shadowing). Again same head. Eyes not inserted in that example of course.
That should help clear everything up. I've reached out to the factory for a production sample so we can do an unboxing as well. Hoping to have it next week.
- Joined
- Mar 16, 2013
- Messages
- 1,552
- Reaction score
- 9
still doesn't explain the bad base painting.
Fullscale
Freakalicious
- Joined
- Jan 1, 2021
- Messages
- 21
- Reaction score
- 0
I have the deluxe thor and it is my most poorly executed statue. The 'weathering' looks like it was applied by a robot and the skin tones are flat. He's also slightly cross-eyed. I applied some tone washes and it is much better now. None of this is even mentioning the apparent texture tiling on the cape, which is a rookie mistake in digital sculpting.
persuazion
Super Freak
Not gonna cancel based off a few early crappy pics. The fact that they are addressing the comments and showing their work is a good sign. I?ll let the order ride baby!
mistermark
Super Freak
Is the owner of PCS slow? Who's talking about the mask? We're talking about the bad paint on the mask, cheap un-styled dollar store hair used on the production piece when the proto clearly used mohair, and the cheap flimsy fabric bait and switch on the coveralls, and lastly, the horrific paint on the base pics. Pay no attention folks, let me distract you from the issues just send us your money!!!
If PCS weren't hiding the issues they would proudly show a factory production piece from every angle. All that BS comparing the mask. Show us a factory piece!! SMH
If PCS weren't hiding the issues they would proudly show a factory production piece from every angle. All that BS comparing the mask. Show us a factory piece!! SMH
Fullscale
Freakalicious
- Joined
- Jan 1, 2021
- Messages
- 21
- Reaction score
- 0
Did you not see the last line where we specifically requested a production sample to do a live unboxing? It's been a challenge getting everything we need through the last 18 months for some weird global reason. But we really are out to do right by the community. Your post here and in statue forum calling out the 'mohair/dollar store' and 'cheap flimsy fabric' is pretty brazen without one in-hand. we've seen the same pics you have. the first were just awful pics. the second set were better but still not ideal.
I'll post the unboxing here when we get it. Or you could order one and make up your own mind.
space ace
Super Freak
So I tried cancelling but my payment was charged already and MM will be enroute via UPS. If this atrocity is true and I want to return him, what?s my reason to reclaim my NRD? That it?s completely different from the prototype that was advertised?
- Joined
- Oct 31, 2014
- Messages
- 13,003
- Reaction score
- 4,492
The puzzling thing here is that Sideshow seems to be shipping this out before PCS has a sample of their own finished product. And also Sideshow didn't bother to show the production version before shipping either. If they really want to set this straight why not just have Sideshow unbox one today, as they clearly have it.
- Joined
- Oct 28, 2014
- Messages
- 1,346
- Reaction score
- 69
Right, their full of ****. People received this and it looks a tad better but still nothing like the end product. If they would have made the end Product the same I would have gotten it. I still think it looks like crap.
- Joined
- Oct 28, 2014
- Messages
- 1,346
- Reaction score
- 69
This is Matt from the PCS group. Here's Ant's post.
"Ok, this should clear everything up on Myers 1:4 production head. First, a quick summary. Everyone loved the 1:3 Myers head. We used the EXACT same Myers head for the 1:4 Myers prototype (why would we change a good thing). 3D printing made that easy. We then used the 1:4 prototype head for the 1:4 production. Again, why would we change a good thing. Now for picture proof.
Photo with 5 Myers heads. Two on the left are the prototypes. The far left is a black and white version we haven't released. 3 heads on the right are production heads. No change from prototype.
Photo with two white heads. That is the prototype and unpainted factory sample. Even though one is turned slightly left in the pic and one slightly right (you can tell my how much ear is visible) they are the same head.
Photo with 3 heads. Prototype in the middle and factory production on the left and right. Same head.
Photo with 2 heads in color. Right is the prototype and left is production prior to final paint details (blending/shadowing). Again same head. Eyes not inserted in that example of course.
That should help clear everything up. I've reached out to the factory for a production sample so we can do an unboxing as well. Hoping to have it next week.
Bs man!!! The mask looks completely different on the 1/4th than the 1/3rd. The prototype on the 1/4 even looked a tad better. I don't buy this at all. Then where are these pics coming from? Why was it so easy to cancel? Why does the base look like crap? Why does the coveralls look cheap. The 1/3rd is miles a head. At first that was my reasoning too. That if the 1/3rd worked now why isn't the 1/4 look at good. Why are you addressing this issue now? I mean come on dawg. I was the one who complained about the 1/3rd and you guys fixed it. But this one is shipping already, so pple are **** out of luck. But pple want to tell themselves that it is good. But in reality a very bad attempt at the 1/4th. TO bad too, because you would have had my business.
- Joined
- Oct 28, 2014
- Messages
- 1,346
- Reaction score
- 69
I still think it looks bad. Not good compared to the 1/3rd or prototype. Cover alls look like crap, the collar is so low. the base looks so rushed. I hate to say it but this is a huge fail. I'm happy I got my refund and NRD back. Side show must have known because they issued me a refund right away.
