Statue Prime 1 Studio - Batman Vs Superman-1:2 Batman

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
They will just squeeze in there i better go buy 3 of those asap.

I think I've mentioned before, that both Superman and Batman will fit in a 2 high Besta (128cm). Except for the nameplate. But with the Stuva being deeper that won't be an issue.

I contemplated getting them myself, but I prefer black over white so I had to go with the Bestas. I'm currently putting a pair of them together so that I have my Supes and Batman side by side.

Just be aware that due to the sword and shield on Wonder Woman, there's always the chance that she won't fit in a Stuva.
 
I think I've mentioned before, that both Superman and Batman will fit in a 2 high Besta (128cm). Except for the nameplate. But with the Stuva being deeper that won't be an issue.

I contemplated getting them myself, but I prefer black over white so I had to go with the Bestas. I'm currently putting a pair of them together so that I have my Supes and Batman side by side.

Just be aware that due to the sword and shield on Wonder Woman, there's always the chance that she won't fit in a Stuva.

So even though the width of the Besta is 40cm not 50cm the base still fits in nothing having over the edge? I prefer the darker black or chocolate so would rather go Bestas but getting statues like Darkseid prime 1 might have an issue with the base.
 
So even though the width of the Besta is 40cm not 50cm the base still fits in nothing having over the edge? I prefer the darker black or chocolate so would rather go Bestas but getting statues like Darkseid prime 1 might have an issue with the base.

The width is 60cm or rather about 56cm internal dimensions. Its 40 cm deep.

The base itself will fit fine, even with Glassvik doors. The nameplate though won't fit in front of the base at all.

I can take a few photos over the weekend if you'll like to see how it looks like in a Besta.
 
The width is 60cm or rather about 56cm internal dimensions. Its 40 cm deep.

The base itself will fit fine, even with Glassvik doors. The nameplate though won't fit in front of the base at all.

I can take a few photos over the weekend if you'll like to see how it looks like in a Besta.

That would be awesome if you can. If you can show it with the doors open and closed that would be fantastic.

And i meant 40cm depth not width.
 
That would be awesome if you can. If you can show it with the doors open and closed that would be fantastic.

And i meant 40cm depth not width.

Will do. Though I'm not too sure you'll want to use the Glassvik etc doors.

I have the Glassvik doors as my house isn't the best when it comes to dust.

But even so, having the doors closed with the bevels going across the middle, isn't so bad. Imo it's better then having to dust all the time and risk damaging the fabric costume, let alone the paint over time.
 
Will do. Though I'm not too sure you'll want to use the Glassvik etc doors.

I have the Glassvik doors as my house isn't the best when it comes to dust.

But even so, having the doors closed with the bevels going across the middle, isn't so bad. Imo it's better then having to dust all the time and risk damaging the fabric costume, let alone the paint over time.

Glass doors is a must for me i like having windows open etc so dust comes in.
 
Glass doors is a must for me i like having windows open etc so dust comes in.

I've been meaning to look at possibly getting some custom doors made up.

Not just for these half scales, which as I mentioned the door bezels aren't so distracting or maybe I've gotten used to them, but for the 1/3 scales from Prime 1. They just don't work with existing Ikea doors.

I would love to fit two 1/3 statues in the 3 high Bestas without having to worry about the doors bezels obscuring the statues too much.

And I actually use quite a bit of foam tape in between all the gaps in the doors and the Besta frame to limit the dust even more. Just putting the foam in right sometimes takes longer then putting the cabinent itself together.
 
I've been meaning to look at possibly getting some custom doors made up.

Not just for these half scales, which as I mentioned the door bezels aren't so distracting or maybe I've gotten used to them, but for the 1/3 scales from Prime 1. They just don't work with existing Ikea doors.

I would love to fit two 1/3 statues in the 3 high Bestas without having to worry about the doors bezels obscuring the statues too much.

And I actually use quite a bit of foam tape in between all the gaps in the doors and the Besta frame to limit the dust even more. Just putting the foam in right sometimes takes longer then putting the cabinent itself together.

That would look fantastic. Do you have a link or article number of the 3 high bestas?
 
I got mine inside custom made exhibitors, I like having them with not much space available, confined, fit...I think these look awesome this way...then again it is a personal approach nothing more...see it for yourself you may like them. :wink1:

BATMANVSUPERMANDISPLAYING.jpg



They will just squeeze in there i better go buy 3 of those asap.
 
I got mine inside custom made exhibitors, I like having them with not much space available, confined, fit...I think these look awesome this way...then again it is a personal approach nothing more...see it for yourself you may like them. :wink1:

View attachment 347851

They look amazing in there. You considering putting WW in between these two?
 
Definitely...that's the idea, I am having a hard time considering where would I put Armored Batman...but that's a story for another time :wink1:

They look amazing in there. You considering putting WW in between these two?
 
Definitely...that's the idea, I am having a hard time considering where would I put Armored Batman...but that's a story for another time :wink1:

I'm looking forward to the WW 1/2 scale have Bamtan and Superman displayed. I now have no more 1/3 or 1/2 scale statues my room is wide open and can't wait to see what other Prime Studio 1/2 offerings we get. I'm on the fence about the Armored Batman version.. it is amazing but don't want to overload all my 1/2 scale offerings from one film. I would love it if Prime would do a Toby Mcquire Spiderman done wit the same amount of detail we received on the Superman and Batman costumes.
 
I know exactly what you mean but been a The Dark Knight Returns fan this Armored Batman was a no brainer for me. Have you considered maybe The Joker from The Dark Knight? This one is looking incredible.

I'm looking forward to the WW 1/2 scale have Bamtan and Superman displayed. I now have no more 1/3 or 1/2 scale statues my room is wide open and can't wait to see what other Prime Studio 1/2 offerings we get. I'm on the fence about the Armored Batman version.. it is amazing but don't want to overload all my 1/2 scale offerings from one film. I would love it if Prime would do a Toby Mcquire Spiderman done wit the same amount of detail we received on the Superman and Batman costumes.
 
It will be, Prime 1 is making changes to the sculpt and it will look spectacular at the end by the time it comes out...No doubt about it.

If her sculpt is on par with Superman 1:2 i'm pulling the trigger.
 
I know exactly what you mean but been a The Dark Knight Returns fan this Armored Batman was a no brainer for me. Have you considered maybe The Joker from The Dark Knight? This one is looking incredible.

He is definitely on my Radar.. I would love a 89 Batman 1/2 scale and a Nicholson Joker 1/2 scale... I'm sure they are coming ..:) Looking forward to seeing TDK line!!! Don't get me wrong the Armored Bats is under serious consideration!
 
Keaton Batman in 1:2 scale is happening already, Nicholson's very unlikely as it seems that Mr. Nicholson is totally against been immortalized into any figurine been Hot toyz the last time he allowed(after receiving a very generous check) someone to use his likeness but like eveything else in the world...you never know.

I hope there be a The DArk Knight Returns line but currently only Batman statue and blue variant bust has been confirmed, we have to keep in mind that they have been able to create this piece from the Arkham video games license so there could be an issue there.

Go for Armored Batman...even though I love regular suit Batman I get the feeling that once I see Armored my perspective is going to change and my favoritism will move towards this version of the character as it looks so badarse.

He is definitely on my Radar.. I would love a 89 Batman 1/2 scale and a Nicholson Joker 1/2 scale... I'm sure they are coming ..:) Looking forward to seeing TDK line!!! Don't get me wrong the Armored Bats is under serious consideration!
 
Bale was confirmed for both scales while Keaton was confirmed in 1:3 BUT there has been strong rumors, based on comments from Prime 1 reps thru social media(twitter, facebook, instagram) which suggest that the option for a 1:2 is also open... But Uncle Bingo is absolutely right as at the moment there is just another Batman confirmed in 1:2 scale and that is Bale's.

Keaton is coming in 1:3 not 1:2. The only other 1:2 that has been confirmed so far is Bale.
 
You are not the only one, I know 4 different people who had these issues including me. I have returned it and asked for a replacement. It took them 3 months to start acting, but it seems it's on the right path.
 
Back
Top