Action Figure Final Fantasy VII Remake Collectibles

Advertise with us
shop deals on amazon
One sixth kit
Comic concepts
Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
FilthyCasual said:
Well there may or may not be some official 1/4 scale products revealed later this year... so this could pair together. That said this barret looks like a cg render. Looks like the studio has a vincent that previously released, I would look into that to see if you like the quality before ordering.

View attachment 733095
Click to expand...
Correct. They had a poll back in August asking if they should go back to pre-orders based on 3D render sculpts.

Initially, Barret was going to be based on the physical prototype but the poll won in favor of pre-order based on the render.

Right now, they are currently working on Yuffie and Cloud vs Sephiroth. They have already teased Tifa and Aerith.
 
trophonius said:
Correct. They had a poll back in August asking if they should go back to pre-orders based on 3D render sculpts.

Initially, Barret was going to be based on the physical prototype but the poll won in favor of pre-order based on the render.

Right now, they are currently working on Yuffie and Cloud vs Sephiroth. They have already teased Tifa and Aerith.
Click to expand...
I'll take your word about the polls, but that sounds crazy that anyone would  prefer to put down a deposit on a render over a prototype...

While nothing's been confirmed yet, prime 1 studio did announce they have a project with square enix coming up. I would hold out for that before ordering any statues
 
Last edited:
FilthyCasual said:
I'll take your word about the polls, but that sounds crazy that anyone would  prefer to put down a deposit on a render over a prototype...

While nothing's been confirmed yet, prime 1 studio did announce they have a project with square enix coming up. I would hold out for that before ordering any statues
Click to expand...
Nice! Can you share when they announced? If not, no biggie. Also attaching prototypes of Barret & Yuffie.
 

Attachments

  • 461341900_1057490689421515_4035471435546543316_n.jpg
    461341900_1057490689421515_4035471435546543316_n.jpg
    153.9 KB
  • 461931700_1062406452263272_7926861228666330176_n.jpg
    461931700_1062406452263272_7926861228666330176_n.jpg
    389.6 KB
trophonius said:
Nice! Can you share when they announced? If not, no biggie. Also attaching prototypes of Barret & Yuffie.
Click to expand...

It's mentioned at the end of the previous showcase video around the 59:40 mark.
(Also notice the lifestream background at the 1:00 mark)



The reveal is expected to drop next month, but the schedule could get pushed back.

Also note that prime 1's products with square are sold on the square online store, where they do not accept payment plans so you might wanna plan ahead financially if you are looking out for statues.
 
FilthyCasual said:
I'll take your word about the polls, but that sounds crazy that anyone would  prefer to put down a deposit on a render over a prototype...

While nothing's been confirmed yet, prime 1 studio did announce they have a project with square enix coming up. I would hold out for that before ordering any statues
Click to expand...
It's a prototype. I don't know why some here are saying render
 

Attachments

  • Screenshot_20241020-005653.jpg
    Screenshot_20241020-005653.jpg
    92.7 KB
  • Messenger_creation_090D654A-981A-4F70-905F-00DE5CD266D3.jpeg
    Messenger_creation_090D654A-981A-4F70-905F-00DE5CD266D3.jpeg
    256.2 KB
  • Messenger_creation_8DCD6D07-C266-492C-88DC-CAE752F6B477.jpeg
    Messenger_creation_8DCD6D07-C266-492C-88DC-CAE752F6B477.jpeg
    53.4 KB
They had the physical proto of Yuffie completely redone because she was slightly out of scale with Cloud, that's dedication for ya. Tifa and Aeris are coming from them over the next few years too which is exciting. I have both Sephiroth and Yuffie coming from them so I'll be sure to post photos.

Also, long time no post, so hello everyone - since the GT 1st Class body reissue is coming soon(ish), thought I'd ask if there's anyone out there doing kits converting it from the 1st Class outfit to Cloud's regular gear? I know that's only really replacing a pauldron and a leather strap, but I'm useless at kitbashing.
 
I have Fanart statues of Tifa and Cloud in 1/3 scale, and Aerith is on preorder. I love the size and presence they bring to my collection, but it is abit challenging to find other statues in this scale since most are 1/4, so matching pieces is a bit tougher.
 
FilthyCasual said:
Well there may or may not be some official 1/4 scale products revealed later this year... so this could pair together. That said this barret looks like a cg render. Looks like the studio has a vincent that previously released, I would look into that to see if you like the quality before ordering.

View attachment 733095
Click to expand...
Isn't his face is a bit long? No pun intended.
 
Misterbadguy said:
They had the physical proto of Yuffie completely redone because she was slightly out of scale with Cloud, that's dedication for ya. Tifa and Aeris are coming from them over the next few years too which is exciting. I have both Sephiroth and Yuffie coming from them so I'll be sure to post photos.

Also, long time no post, so hello everyone - since the GT 1st Class body reissue is coming soon(ish), thought I'd ask if there's anyone out there doing kits converting it from the 1st Class outfit to Cloud's regular gear? I know that's only really replacing a pauldron and a leather strap, but I'm useless at kitbashing.
Click to expand...

The 1st Class body is a much more accurate color to Cloud's normal outfit than the brighter, more purple shade the original figure had, so my ideal figure would use the suit from the 1st Class figure with all the accoutrements from the normal figure, so I'll probably try to do that when I get mine in hand. Depends largely on how easy it is to remove the pauldron/harness, it feels like a pretty big hassle tbh. But when I do I could look into the possibility of making a 3D printable remake Pauldron people can have, but there'd still be the problem of the different gloves. Making a set of those for people would be a lot more work I wouldn't be willing to commit to for how niche it would be (I don't think anybody used the boots I made for the VTS Cloud lol, at least nobody told me they did), and since ACG was still talking about making a Cloud, I'm wary to spend too much time and effort on something like this when a better option could be on the way.
 
PCWW88 said:
For the 1st Class Body:

1) Remove arms.

2) Detach the strap below the harness. It is glued on, you can carefully pry it off with a thin object wedged between or you can cut it off, but I prefer to keep it intact incase I need to reattach in future.

3) Pull the shirt off.

4) Pull the rubber chest cover off, it will be tight,. but it will eventually slide off. You can heat it up lightly with a hair dryer to make it more flexible if needed.

5) Find a thin/small screw driver and remove the 3 screws art the back.

6) Detach body and pull off harness

For the OG Remake Body:

1) Same as above.

2) Same as above.

3) Same as above.

4) Body is on a ball joint so you can just forcefully pull it off.

5) Pull of harness

Rest is easy, you just swap everything round.

I feel this modification makes the GT002 much more accurate to how Cloud looks in Remake & Rebirth.

The colour of the uniform is much darker than the previous blue. It has better articulation and then the upgraded headsculpt over the original release.

If GameToys were to re-release the OG Cloud, this would be it.

Only thing I couldn’t change is the ‘Fenrir Earring’, but it’s minor.

Hope this helps.

😊
Click to expand...
Misterbadguy said:
They had the physical proto of Yuffie completely redone because she was slightly out of scale with Cloud, that's dedication for ya. Tifa and Aeris are coming from them over the next few years too which is exciting. I have both Sephiroth and Yuffie coming from them so I'll be sure to post photos.

Also, long time no post, so hello everyone - since the GT 1st Class body reissue is coming soon(ish), thought I'd ask if there's anyone out there doing kits converting it from the 1st Class outfit to Cloud's regular gear? I know that's only really replacing a pauldron and a leather strap, but I'm useless at kitbashing.
Click to expand...

Just sharing this step by step again.
 

Attachments

  • 530956-IMG-7201.jpeg
    530956-IMG-7201.jpeg
    571.8 KB
  • 530957-IMG-7202.jpeg
    530957-IMG-7202.jpeg
    369.8 KB
Just wondering if anyone here is still chasing after any of the GAMETOYS FF7 releases?
Been debating selling mine. They’re all BNIB, never displayed.
Have:
1) Cloud and Fenrir
2) Cloud and Hardy Daytona
3) Zack 1st Class
4) Sephiroth
5) Zack Second Class body
6) Cloud 1st Class body
7) The extra arms that were released x2 each version

Not looking for any profits, but also don’t want to lose money on them.
 
speiky said:
Just wondering if anyone here is still chasing after any of the GAMETOYS FF7 releases?
Been debating selling mine. They’re all BNIB, never displayed.
Have:
1) Cloud and Fenrir
2) Cloud and Hardy Daytona
3) Zack 1st Class
4) Sephiroth
5) Zack Second Class body
6) Cloud 1st Class body
7) The extra arms that were released x2 each version

Not looking for any profits, but also don’t want to lose money on them.
Click to expand...
Dropped you a PM!
 
Ma2amune said:
Isn't his face is a bit long? No pun intended.
Click to expand...
Agreed. I think the paint looks kinda plasticy as well, like an upscaled static arts figure. The Barret proto looks better.. but past works speaks louder than promo pics. It's all relative to the price tho, not sure what this retailed at
 
FilthyCasual said:
Agreed. I think the paint looks kinda plasticy as well, like an upscaled static arts figure. The Barret proto looks better.. but past works speaks louder than promo pics. It's all relative to the price tho, not sure what this retailed at
Click to expand...

Their older FF7 works are definitely a tad iffy, but I believe they changed both the sculptor and the factory for those specifically after their Zack statue. Their old FF9 stuff by comparison is much nicer (not my photos, found by Googling):

1000005215.jpg


1000005214.jpg
 
Thanks for the PMs fellow collectors. I’ll get back to you in a bit.
Ideally I would ship them out to a buyer as a lot. Like I mentioned, I’m not looking to make any money off of them. Just want to recoup what I paid for them.
We all know eBay sellers like to fleece us. That’s not my intention at all.
 
speiky said:
Just wondering if anyone here is still chasing after any of the GAMETOYS FF7 releases?
Been debating selling mine. They’re all BNIB, never displayed.
Have:
1) Cloud and Fenrir
2) Cloud and Hardy Daytona
3) Zack 1st Class
4) Sephiroth
5) Zack Second Class body
6) Cloud 1st Class body
7) The extra arms that were released x2 each version

Not looking for any profits, but also don’t want to lose money on them.
Click to expand...
If you still debating how much for the sephiroth?
 

Similar threads

The.Boyfriend
For Sale WTS Majority of Collection
Replies
3
Views
880
The.Boyfriend
The.Boyfriend
Snake Plissken
Final Fantasy VIII HD Remake
2
Replies
20
Views
6K
Marksman
M
The Josh
The Josh's 2010 Comic-Con Coverage Thread
7 8 9
Replies
166
Views
18K
Adoptedscot
Adoptedscot

Latest posts

Back
Top