1/6 Scale Aliens APC (scratchbuild)

[Marine Boy]

The Mad Max Interceptor build is winding down now, so i like to start a new project as I'm waiting for paint to dry. I'm not going all in on it just yet, as the size of it means I have to clear the other projects from my shed first. I just wanted to tackle the hardest part first, the front end, because of it's multitude of shapes and angles.

Easiest bit first, the driver's door.

The turret side went together quite quickly, as the base and sides around the turret are horizontal and vertical. Using these faces as a datum, it was fairly easy to determine the angles of the adjoining panels.

Before attaching the door panel, i had to make sure the whole assembly was perfectly level, so I taped it to a piece of plywood.

With both sides held in position, it just needed the 2 panels making to join them together. 4 days work so far.

 

[agonistes86]

Looking forward to following this build!

 

[kyekye]

This will be 5 ft long (1.536m)!!??
You will need full metal frame to support the weight, I think?

 

[Marine Boy]

I'm going to use a sheet of plywood for the chassis, which should stop any body flex. The body sections will be screwed to that.

 

[Marine Boy]

Left side panel mostly done. The central engine panel will be removeable to allow a viewing window into the interior, with the roof still in place.

 

[Marine Boy]

Engine panel fitted.

Right side panel done.

Front wheel arches being made.

Temporarily taped together, just to get an idea of the size. Once I make the plywood base, they will be screwed down.

The grey beam above the door is just to keep everything straight. It's not the roof height.