1/6 SUPERMAD TOYS, the old detective 2049

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I am using the Worldbox AT020 (standard 2024 version) for now for my Supermad K. I find he looks more accurate to Gosling's on-screen in build now compared to the stock Supermad body, but is a touch too tall for my liking:

+ The AT020 has given him narrower shoulders which slope a bit more naturally, though Gosling's arms still slope more when in a neutral, relaxed pose than what the AT020 offers. Before he looked like Tyrant from Resident Evil 3, with very broad, coat-hanger shoulders .

+ Better shaped chest that fills in the jumper better.

+ My neck adapter mod also works better with this body and I have full control with articulation and height adjustment, the latter of which I find is more important to get right for this figure since, a. Gosling has a tall neck, b. the Supermad jumper neckline is much higher than the one worn in the 2049 and c. Vince (V Collectibles) deliberately made the neck of his sculpt taller, apparently learning from the Jinx neck being too short and exposing the neck line easily.

- I think the AT020 makes him approx. .5 - 1cm too tall. I think the height is passable but for me, looks slightly out of place and wrong in relation to the heights of my other figures, like Indiana Jones; Gosling is 1.84m tall, according to Google and Harrison Ford is 1.85m, and I find the ANH/ Solo Story bodies ideal for Ford overall and in height.

I don't like the AT020 much and find it a difficult body to work for various reasons, as follows:

- Poor quality joints (one arm flops a bit after a certain point on its axis), heavy weight making it difficult to stand upright securely and safely, though boots helps with this a lot.

- Lack of access to screws and disassembly of body that I can see, making it impossible for me to modify/ Frankenstein and improve the body for the figure.

- Ankle joints are poor, very stiff out of box and have limited articulation, with just a central pivot and nothing else, unlike the standard 360 degrees from Hot Toys.

- Thighs are a bit too skinny for most physiques/ figure needs and thus, need some padding, my usual self-gripping bandage didn't work as the trousers are so skinny, It was impossible to pull them over all the way up to the waist line. Though, I thought of sticking brown packaging tape over the bandage next time perhaps, to make a smooth surface to glide over. I used an thin dungaree undergarment instead which has helped very slightly. The extra layer seems to have also allowed the jumper to stay stretched fully as far down as possible and over the trousers whilst not pulling back up. It did this before. I will wait for the other bodies to potentially try them, otherwise I will stick with the AT020 and maybe re-do the bandage padding with the above method.

I eventually got to Frankensteining a new body for K using left over, spare parts, an ANH mash of Jared Leto Joker chest and l arms and Solo Story waist and legs. I shaved the neck down and modified the adapter peg to fit the neck, though this was not as good and ideal as my AT020. Things were looking good until I put everything on. The jacket is too slim for the ANH chest/ bust size and does not fit as well. The height was about spot on, I felt, however. The thighs were a bit more filled in. I had limited articulation and stability with my temporary neck fitting solution, I would have to file one of my spare neck adapters down for a better solution. I went back to the AT020 using the undergarment.

Neck Mod:

20241026_171933.jpg20241026_171947.jpg20241026_171953.jpg20241028_184432.jpg20241029_131816.jpg

ANH Frankenstein Body:

20241029_124854.jpg20241029_125639.jpg20241029_160346.jpg20241029_160350.jpg20241029_160352.jpg20241029_160459.jpg20241029_161142.jpg20241029_162502.jpg20241029_154933.jpg

Stock Supermad Body:

20241025_183255.jpg20241025_183311.jpg20241025_192531.jpg20241025_233937.jpg20241026_185242.jpg20241026_191907.jpg20241026_191934.jpg

AT020 Body and bare body comparison with stock Supermad:

20241028_164602.jpg20241028_164610.jpg20241028_182102.jpg20241028_182106.jpg20241028_182109.jpg20241028_182840.jpg20241029_131808.jpg20241029_131812.jpg20241028_192653.jpg20241028_192937.jpg

AT020 and stock Supermad body shoulder comparison:

qzysqpad58f81.jpg20241026_182952.jpg20241028_184138.jpg

Undergarment on AT020:

20241029_170558.jpg20241029_170603.jpg20241029_170605.jpg

Dry-futzed jacket and current look on AT020 body:

1.jpg
 
Last edited:
It’s amazing to me that we haven’t seen a single new K since the Supermad release (not counting the Present Toys version since that’s vanished). Luckily there’s the custom route for those who are willing to spend the money, but even the custom pieces are fairly difficult to get a hold of.
 
I am using the Worldbox AT020 (standard 2024 version) for now for my Supermad K. I find he looks more accurate to Gosling's on-screen in build now compared to the stock Supermad body, but is a touch too tall for my liking:

+ The AT020 has given him narrower shoulders which slope a bit more naturally, though Gosling's arms still slope more when in a neutral, relaxed pose than what the AT020 offers. Before he looked like Tyrant from Resident Evil 3, with very broad, coat-hanger shoulders .

+ Better shaped chest that fills in the jumper better.

+ My neck adapter mod also works better with this body and I have full control with articulation and height adjustment, the latter of which I find is more important to get right for this figure since, a. Gosling has a tall neck, b. the Supermad jumper neckline is much higher than the one worn in the 2049 and c. Vince (V Collectibles) deliberately made the neck of his sculpt taller, apparently learning from the Jinx neck being too short and exposing the neck line easily.

- I think the AT020 makes him approx. .5 - 1cm too tall. I think the height is passable but for me, looks slightly out of place and wrong in relation to the heights of my other figures, like Indiana Jones; Gosling is 1.84m tall, according to Google and Harrison Ford is 1.85m, and I find the ANH/ Solo Story bodies ideal for Ford overall and in height.

I don't like the AT020 much and find it a difficult body to work for various reasons, as follows:

- Poor quality joints (one arm flops a bit after a certain point on its axis), heavy weight making it difficult to stand upright securely and safely, though boots helps with this a lot.

- Lack of access to screws and disassembly of body that I can see, making it impossible for me to modify/ Frankenstein and improve the body for the figure.

- Ankle joints are poor, very stiff out of box and have limited articulation, with just a central pivot and nothing else, unlike the standard 360 degrees from Hot Toys.

- Thighs are a bit too skinny for most physiques/ figure needs and thus, need some padding, my usual self-gripping bandage didn't work as the trousers are so skinny, It was impossible to pull them over all the way up to the waist line. Though, I thought of sticking brown packaging tape over the bandage next time perhaps, to make a smooth surface to glide over. I used an thin dungaree undergarment instead which has helped very slightly. The extra layer seems to have also allowed the jumper to stay stretched fully as far down as possible and over the trousers whilst not pulling back up. It did this before. I will wait for the other bodies to potentially try them, otherwise I will stick with the AT020 and maybe re-do the bandage padding with the above method.

I eventually got to Frankensteining a new body for K using left over, spare parts, an ANH mash of Jared Leto Joker chest and l arms and Solo Story waist and legs. I shaved the neck down and modified the adapter peg to fit the neck, though this was not as good and ideal as my AT020. Things were looking good until I put everything on. The jacket is too slim for the ANH chest/ bust size and does not fit as well. The height was about spot on, I felt, however. The thighs were a bit more filled in. I had limited articulation and stability with my temporary neck fitting solution, I would have to file one of my spare neck adapters down for a better solution. I went back to the AT020 using the undergarment.

I am using the Worldbox AT020 (standard 2024 version) for now for my Supermad K. I find he looks more accurate to Gosling's on-screen in build now compared to the stock Supermad body, but is a touch too tall for my liking:

+ The AT020 has given him narrower shoulders which slope a bit more naturally, though Gosling's arms still slope more when in a neutral, relaxed pose than what the AT020 offers. Before he looked like Tyrant from Resident Evil 3, with very broad, coat-hanger shoulders .

+ Better shaped chest that fills in the jumper better.

+ My neck adapter mod also works better with this body and I have full control with articulation and height adjustment, the latter of which I find is more important to get right for this figure since, a. Gosling has a tall neck, b. the Supermad jumper neckline is much higher than the one worn in the 2049 and c. Vince (V Collectibles) deliberately made the neck of his sculpt taller, apparently learning from the Jinx neck being too short and exposing the neck line easily.

- I think the AT020 makes him approx. .5 - 1cm too tall. I think the height is passable but for me, looks slightly out of place and wrong in relation to the heights of my other figures, like Indiana Jones; Gosling is 1.84m tall, according to Google and Harrison Ford is 1.85m, and I find the ANH/ Solo Story bodies ideal for Ford overall and in height.

I don't like the AT020 much and find it a difficult body to work for various reasons, as follows:

- Poor quality joints (one arm flops a bit after a certain point on its axis), heavy weight making it difficult to stand upright securely and safely, though boots helps with this a lot.

- Lack of access to screws and disassembly of body that I can see, making it impossible for me to modify/ Frankenstein and improve the body for the figure.

- Ankle joints are poor, very stiff out of box and have limited articulation, with just a central pivot and nothing else, unlike the standard 360 degrees from Hot Toys.

- Thighs are a bit too skinny for most physiques/ figure needs and thus, need some padding, my usual self-gripping bandage didn't work as the trousers are so skinny, It was impossible to pull them over all the way up to the waist line. Though, I thought of sticking brown packaging tape over the bandage next time perhaps, to make a smooth surface to glide over. I used an thin dungaree undergarment instead which has helped very slightly. The extra layer seems to have also allowed the jumper to stay stretched fully as far down as possible and over the trousers whilst not pulling back up. It did this before. I will wait for the other bodies to potentially try them, otherwise I will stick with the AT020 and maybe re-do the bandage padding with the above method.

I eventually got to Frankensteining a new body for K using left over, spare parts, an ANH mash of Jared Leto Joker chest and l arms and Solo Story waist and legs. I shaved the neck down and modified the adapter peg to fit the neck, though this was not as good and ideal as my AT020. Things were looking good until I put everything on. The jacket is too slim for the ANH chest/ bust size and does not fit as well. The height was about spot on, I felt, however. The thighs were a bit more filled in. I had limited articulation and stability with my temporary neck fitting solution, I would have to file one of my spare neck adapters down for a better solution. I went back to the AT020 using the undergarment.

Neck Mod:

View attachment 735136View attachment 735137View attachment 735138View attachment 735139View attachment 735140

ANH Frankenstein Body:

View attachment 735141View attachment 735142View attachment 735143View attachment 735144View attachment 735145View attachment 735146View attachment 735147View attachment 735148View attachment 735149

Stock Supermad Body:

View attachment 735150View attachment 735151View attachment 735152View attachment 735153View attachment 735154View attachment 735155View attachment 735156

AT020 Body and bare body comparison with stock Supermad:

View attachment 735157View attachment 735158View attachment 735159View attachment 735160View attachment 735161View attachment 735162View attachment 735163View attachment 735164View attachment 735165View attachment 735166

AT020 and stock Supermad body shoulder comparison:

View attachment 735167View attachment 735168View attachment 735169

Undergarment on AT020:

View attachment 735170View attachment 735171View attachment 735172

Dry-futzed jacket and current look on AT020 body:

View attachment 735175

I have added lots of photos to support my write-up and chart my progress with my Officer K custom figure. I hope it is of help.

Wishes
 
It’s amazing to me that we haven’t seen a single new K since the Supermad release (not counting the Present Toys version since that’s vanished). Luckily there’s the custom route for those who are willing to spend the money, but even the custom pieces are fairly difficult to get a hold of.

I will add that the figures themselves are hard to get a hold of, especially in the UK here, for many third party releases like this, where they can be very rare. I consider myself very fortunate to even have this figure. And I noticed the asking price is twice to over two times as high on eBay US for the Supermad K at the moment.
 
Taking advantage that the thread has been a bit active again, does anyone knows where this picture comes from? I'd like to know the painter, sculptor and what clothing set are they using.

View attachment 734944
The legendary Jnix sculpt, Fantastic head 👌

In fact I think at this point the Jnix sculpt is the best so far (I still have one of those recast copies but still without paint)

And to be fair I think the clothing set/outfit from SuperMad it's way better than the black box ver.

I'm still Super Mad cause KG f hobby changed my shipping method at the time without telling me and the figure got lost 😒

I did my best with the old black box set

Still don't know what happened with the present toys officer K , I was really interested in that figure 😐
 

Attachments

  • PXL_20241030_185836356~2.jpg
    PXL_20241030_185836356~2.jpg
    1.2 MB
The legendary Jnix sculpt, Fantastic head 👌

In fact I think at this point the Jnix sculpt is the best so far (I still have one of those recast copies but still without paint)

And to be fair I think the clothing set/outfit from SuperMad it's way better than the black box ver.

I'm still Super Mad cause KG f hobby changed my shipping method at the time without telling me and the figure got lost 😒

I did my best with the old black box set

Still don't know what happened with the present toys officer K , I was really interested in that figure 😐
Is that one of the eBay head sculpt blanks in this pic? Looks good
 
The original Jnix sculpt still shows up from time to time. I still prefer it to the Buffy, though that sculpt is also very nice. Surprised to see the PT figure disappear.
 
I am using the Worldbox AT020 (standard 2024 version) for now for my Supermad K. I find he looks more accurate to Gosling's on-screen in build now compared to the stock Supermad body, but is a touch too tall for my liking:

+ The AT020 has given him narrower shoulders which slope a bit more naturally, though Gosling's arms still slope more when in a neutral, relaxed pose than what the AT020 offers. Before he looked like Tyrant from Resident Evil 3, with very broad, coat-hanger shoulders .

+ Better shaped chest that fills in the jumper better.

+ My neck adapter mod also works better with this body and I have full control with articulation and height adjustment, the latter of which I find is more important to get right for this figure since, a. Gosling has a tall neck, b. the Supermad jumper neckline is much higher than the one worn in the 2049 and c. Vince (V Collectibles) deliberately made the neck of his sculpt taller, apparently learning from the Jinx neck being too short and exposing the neck line easily.

- I think the AT020 makes him approx. .5 - 1cm too tall. I think the height is passable but for me, looks slightly out of place and wrong in relation to the heights of my other figures, like Indiana Jones; Gosling is 1.84m tall, according to Google and Harrison Ford is 1.85m, and I find the ANH/ Solo Story bodies ideal for Ford overall and in height.

I don't like the AT020 much and find it a difficult body to work for various reasons, as follows:

- Poor quality joints (one arm flops a bit after a certain point on its axis), heavy weight making it difficult to stand upright securely and safely, though boots helps with this a lot.

- Lack of access to screws and disassembly of body that I can see, making it impossible for me to modify/ Frankenstein and improve the body for the figure.

- Ankle joints are poor, very stiff out of box and have limited articulation, with just a central pivot and nothing else, unlike the standard 360 degrees from Hot Toys.

- Thighs are a bit too skinny for most physiques/ figure needs and thus, need some padding, my usual self-gripping bandage didn't work as the trousers are so skinny, It was impossible to pull them over all the way up to the waist line. Though, I thought of sticking brown packaging tape over the bandage next time perhaps, to make a smooth surface to glide over. I used an thin dungaree undergarment instead which has helped very slightly. The extra layer seems to have also allowed the jumper to stay stretched fully as far down as possible and over the trousers whilst not pulling back up. It did this before. I will wait for the other bodies to potentially try them, otherwise I will stick with the AT020 and maybe re-do the bandage padding with the above method.

I eventually got to Frankensteining a new body for K using left over, spare parts, an ANH mash of Jared Leto Joker chest and l arms and Solo Story waist and legs. I shaved the neck down and modified the adapter peg to fit the neck, though this was not as good and ideal as my AT020. Things were looking good until I put everything on. The jacket is too slim for the ANH chest/ bust size and does not fit as well. The height was about spot on, I felt, however. The thighs were a bit more filled in. I had limited articulation and stability with my temporary neck fitting solution, I would have to file one of my spare neck adapters down for a better solution. I went back to the AT020 using the undergarment.

Neck Mod:

View attachment 735136View attachment 735137View attachment 735138View attachment 735139View attachment 735140

ANH Frankenstein Body:

View attachment 735141View attachment 735142View attachment 735143View attachment 735144View attachment 735145View attachment 735146View attachment 735147View attachment 735148View attachment 735149

Stock Supermad Body:

View attachment 735150View attachment 735151View attachment 735152View attachment 735153View attachment 735154View attachment 735155View attachment 735156

AT020 Body and bare body comparison with stock Supermad:

View attachment 735157View attachment 735158View attachment 735159View attachment 735160View attachment 735161View attachment 735162View attachment 735163View attachment 735164View attachment 735165View attachment 735166

AT020 and stock Supermad body shoulder comparison:

View attachment 735167View attachment 735168View attachment 735169

Undergarment on AT020:

View attachment 735170View attachment 735171View attachment 735172

Dry-futzed jacket and current look on AT020 body:

View attachment 735175

I built a new, modified body today to try out for K today, made up of a Maha studio MH2201 modular body torso and arms, HTs Leto (same as ANH) belly, waist, thighs and HTs MMS209 Tony Stark Mechanic lower legs. One caveat is that the Maha chest didn't fit securely over the HTs waist, which made things very finicky and tricky when assembling, clothing and posing the figure.

I think the Maha is a decent body and good and fun for customisation, being modular. but the thighs are on the thing side and need padding for many body types, the back of the neck may need modification as I did and the arms a bit too short for the Supermad coat sleeve length, but passable, I think.

20241111_124000.jpg20241111_145305.jpg20241111_145311.jpg20241111_145320.jpg

I had to file the back of the neck of the Maha chest down in order for my V Collectible K neck to fit properly and allow good articulation and height adjustment. I was prepared for this as one YouTube review mentioned this as an issue and the reviewer did the same thing for one their heads (not K).

20241111_155146.jpg20241111_183309.jpg20241111_183324.jpg

It was decent but too short and slightly stocky for Gosling. K was now considerably shorter than Deckard, which was not right, since Gosling and Ford are about the same height 1.84/ 1.85m tall. The Supermad outfit also didn't fit quite as well, I couldn't get it centered on the body, so the rear tailcoat vent was always off-centre, no matter how much I tried to futz. I soon realised that the AT020 I was using before was better and accurate for Gosling's build and proportions and the Supermad outfit. I did try to get the ankle extenders but gave up after many tries using my hair dryer as usual. Annoyingly, they extenders would have made the legs approx. .5cm too long, I think.

20241111_194554.jpg20241111_194607.jpg20241111_201543.jpg20241111_201552.jpg20241111_202147.jpg

Back to the AT020 it was.

20241111_212250.jpg

Comparison of the Maha, Leto and 'other' Frankenstein and AT020:

20241111_194554.jpg20241111_212250.jpg
 
Last edited:
Back
Top