Batman 1989 Vault Door Weapons Display

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

gregday

Freakalicious
CF Supporter
Joined
Aug 18, 2010
Messages
40
Reaction score
6
Hello,

For some years I have been collecting full size 1:1 Batman 89 weapons and gadgets, and when I finally amassed the complete set, I thought I needed a great way to display them.

So last April I headed to my hardware store and bought some MDF and set to work replicating the door to the Batsuit vault in the Batcave. It took me a couple of months working on it in my spare time.

After carving out all the pieces and assembling, it has a resin coating all over for hardness and durability. The details such as the lock deadbolts, hand wheel, nuts & bolts and cross bars are all metal. A few other accents are machined Delrin.

All in all it stands around 4.5 feet tall and weighs around 140 lbs fully populated with all the gear. Due to space, I opted to go for around 90% scale rather than full size. No plans to build the full vault itself or the suit.

The provenance of the props is as follows:
Batarang - Ikon Design Studio, metal
Gauntlet, grapnel darts, ninja wheels, smoke capsules - Guido “GermanBat” Kohlen, all metal & glass
Speargun - SDTUDIOS, all metal
Bat Tracker & Speargun Tranquilizer attachment - ValorProps, 3D printed
Time Bomb - Steel
Chest Emblem - 3 piece metal assembly

Also shown next to it is my 89 Utility Belt made from a HenryWayne 2-piece locking buckle and a real 1988 Chevy molding trim strap (same as original)

Thanks for looking
 

Attachments

  • IMG_5607.jpeg
    IMG_5607.jpeg
    1.6 MB
  • IMG_5614.jpeg
    IMG_5614.jpeg
    1.7 MB
  • IMG_5623.jpeg
    IMG_5623.jpeg
    3.3 MB
  • IMG_5630.jpeg
    IMG_5630.jpeg
    1.6 MB
  • IMG_5638.jpeg
    IMG_5638.jpeg
    1.1 MB
  • IMG_5626.jpeg
    IMG_5626.jpeg
    2.1 MB
  • IMG_5628.jpeg
    IMG_5628.jpeg
    1.5 MB
  • IMG_5027.jpeg
    IMG_5027.jpeg
    580.7 KB
Here’s a couple of progress pics. I started with some large MDF sheets and a jigsaw to cut the curved ends first and then layered up the “ring” that the foam would set into.
 

Attachments

  • IMG_2735.jpeg
    IMG_2735.jpeg
    401.2 KB
  • IMG_2738.jpeg
    IMG_2738.jpeg
    1.5 MB
  • IMG_2726.jpeg
    IMG_2726.jpeg
    2.1 MB
  • IMG_2723.jpeg
    IMG_2723.jpeg
    1.5 MB
Back
Top