Blade Runner 2049 - 1/6 scale figures / parts / modifications

[Scout Trooper]

300 (plus 5 percent fee) for the full figure? Are they asking for postage now as well? Ordering through Instagram is a little sketchy feeling, not to mention the fact that they apparently blasted someone's personal info out. I really wish they were going through a retailer.

I told them I'd pay postage later, when it's ready to ship.

Ordering through instagram is pretty standard when dealing with these studios.

I'd prefer to order through a retailer, but this keeps it cheaper, and hidden from Alcon's radar.

It's also possible their production capabilities are limited, and they want to keep numbers low to maintain a certain standard of quality. That might explain why the preorder window is so short.

 

[H1mcgdnrc]

Good points all around! It looks too good to let it slip, I think I'm going to roll the dice on it.

 

[01010011antiago]

Good points all around! It looks too good to let it slip, I think I'm going to roll the dice on it.

Same, I'll just take the risk and hope it comes out good. This is one of the figures I expected to spend +$500 as I only thought I would only be satisfied with a custom quality figure. What Por offers it's not perfect, but it's pretty damn good.

 

[Scout Trooper]

Same, I'll just take the risk and hope it comes out good. This is one of the figures I expected to spend +$500 as I only thought I would only be satisfied with a custom quality figure. What Por offers it's not perfect, but it's pretty damn good.

Yup. Not perfect. But I'd take that coat over Yunsil's. And I'll take all the goodies that come with it for less than what that Yunsil coat costs.

 

[RPM716]

Can’t believe I missed this thread all this time! In case anyone wanted the refresher, here’s the old “standard” for customs: JNIX/new Yunsil (forgive the bad coloring for the coat, haven’t had a chance to properly photograph since I got the Yunsil set):

I’ve since added the Mr.Nobody blaster but I still need some decent boots, I wasn’t a fan of how his turned out. All that to say, I can admit that the Por Toys set looks incredible even if I spent a fair bit on this set up. As others have mentioned, I’d totally jump on the set if Kit were offering it but the confusion and my general distrust of custom artists/studio pre orders turned me off. Surely something else will pop up to continue the obsession!

 

[Scout Trooper]

Can’t believe I missed this thread all this time! In case anyone wanted the refresher, here’s the old “standard” for customs: JNIX/new Yunsil (forgive the bad coloring for the coat, haven’t had a chance to properly photograph since I got the Yunsil set):
View attachment 739044
I’ve since added the Mr.Nobody blaster but I still need some decent boots, I wasn’t a fan of how his turned out. All that to say, I can admit that the Por Toys set looks incredible even if I spent a fair bit on this set up. As others have mentioned, I’d totally jump on the set if Kit were offering it but the confusion and my general distrust of custom artists/studio pre orders turned me off. Surely something else will pop up to continue the obsession!

I like how your sculpt is painted. Yelim? That's pretty much what I was aiming for. But 357 botched it... which is why I'm eager to start over with Justina's sculpt.

 

[01010011antiago]

I like how your sculpt is painted. Yelim? That's pretty much what I was aiming for. But 357 botched it... which is why I'm eager to start over with Justina's sculpt.

They did? that sucks, you got any pics?

Can’t believe I missed this thread all this time! In case anyone wanted the refresher, here’s the old “standard” for customs: JNIX/new Yunsil (forgive the bad coloring for the coat, haven’t had a chance to properly photograph since I got the Yunsil set):
View attachment 739044
I’ve since added the Mr.Nobody blaster but I still need some decent boots, I wasn’t a fan of how his turned out. All that to say, I can admit that the Por Toys set looks incredible even if I spent a fair bit on this set up. As others have mentioned, I’d totally jump on the set if Kit were offering it but the confusion and my general distrust of custom artists/studio pre orders turned me off. Surely something else will pop up to continue the obsession!

That headsculpt looks beautiful, love it. Not a fan of the coat fur tho, but still it's one of the best K figures I've seen.

 

[RPM716]

I like how your sculpt is painted. Yelim? That's pretty much what I was aiming for. But 357 botched it... which is why I'm eager to start over with Justina's sculpt.

Yep, I was lucky enough to pick up the sculpt painted by Yelim. Almost certainly the only Yelim paint job I’ll ever own, and I’m glad it’s this one.

 

[TonTon]

Can’t believe I missed this thread all this time! In case anyone wanted the refresher, here’s the old “standard” for customs: JNIX/new Yunsil (forgive the bad coloring for the coat, haven’t had a chance to properly photograph since I got the Yunsil set):
View attachment 739044
I’ve since added the Mr.Nobody blaster but I still need some decent boots, I wasn’t a fan of how his turned out. All that to say, I can admit that the Por Toys set looks incredible even if I spent a fair bit on this set up. As others have mentioned, I’d totally jump on the set if Kit were offering it but the confusion and my general distrust of custom artists/studio pre orders turned me off. Surely something else will pop up to continue the obsession!

That's a beauty.

 

[Indian Jones]

So, in spending days trying to decipher their messages and gain clarity about their offerings, Por Toys abruptly told me earlier that the Studio version has now sold out. I thought the way in which they said it was funny and rather curt, though. A bit of a **** show.

I was trying to find out if the Studio version was the head only, or full set. It appears that the Studio version is just the head only based on their last messages to me in Chinese, which translates as,

'A single head sculpture costs US$480'
'studio version'

Has anyone here ordered the Studio version and if so, can you confirm if it is just a head only, or full set?

Well done to those that managed to order in time and I hope everyone's orders go well.

 

[01010011antiago]

So, in spending days trying to decipher their messages and gain clarity about their offerings, Por Toys abruptly told me earlier that the Studio version has now sold out. I thought the way in which they said it was funny and rather curt, though. A bit of a **** show.

I was trying to find out if the Studio version was the head only, or full set. It appears that the Studio version is just the head only based on their last messages to me in Chinese, which translates as,

'A single head sculpture costs US$480'
'studio version'

Has anyone here ordered the Studio version and if so, can you confirm if it is just a head only, or full set?

Well done to those that managed to order in time and I hope everyone's orders go well.

So if I understand right, the "premium" version of this figure is already sold out and only the $300 version is available? I'm about to order the last one.

I hope they maintain quality, if not I would've preferred only one good quality headsculpt and coat instead of two half-assed ones...

 

[Indian Jones]

So if I understand right, the "premium" version of this figure is already sold out and only the $300 version is available? I'm about to order the last one.

I hope they maintain quality, if not I would've preferred only one good quality headsculpt and coat instead of two half-assed ones...

I believe the 'premium' Studio version was just offered for the head only. But again, I am not positive.

Same, I would prefer the best quality, hence my interest in their Studio version.

They have one full set left, is it? All the very best with it, buddy. Hope it turns out good

 

[HyperDrive]

So if I understand right, the "premium" version of this figure is already sold out and only the $300 version is available? I'm about to order the last one.

I hope they maintain quality, if not I would've preferred only one good quality headsculpt and coat instead of two half-assed ones...

Wait, there’s only one more $300 Factory set?

They said the window was open till 11/23/24..

 

[01010011antiago]

I believe the 'premium' Studio version was just offered for the head only. But again, I am not positive.

Same, I would prefer the best quality, hence my interest in their Studio version.

They have one full set left, is it? All the very best with it, buddy. Hope it turns out good

Oh, with the "last one" I meant the last one I mentioned in my question, bad wording.

Yeah, I got the funds and will PayPal him later...

 

[01010011antiago]

Wait, there’s only one more $300 Factory set?

They said the window was open till 11/23/24..

Now he's saying it's the 22nd....

 

[Scout Trooper]

Apparently there's a cheaper $150 version that doesn't include the 2nd figure parts.

Also, more pictures of what seems to be their previous factory produced figure. Looks good.

 

[01010011antiago]

Apparently there's a cheaper $150 version that doesn't include the 2nd figure parts.

Where’s the margin profits on that? I’m worried we are going to receive a mess…

 

[Scout Trooper]

Where’s the margin profits on that? I’m worried we are going to receive a mess…

So am I. I hope the outfit colors, details, and weathering hold up in the final product. But I think we're too accustomed to paying marked up overseas prices also. Hot Toys are way cheaper in China.

 

[HyperDrive]

They say the final restoration is about 80%. Looks like I need to reach out to them soon if their cut off is now 11/22.

 

[01010011antiago]

Apparently there's a cheaper $150 version that doesn't include the 2nd figure parts.

Well, I told him I was interested in that and he said "?"

Damn.