Bruce willis head: whos sculpt is this??

[teabelly83]

Don't go with the bald Bruce. It is terribly under sized.

is it, as in how would u say? head to thin, not wide enough, length?

thanks for the help. im finding it hard to find 1 aha. that was the best looking bruce ithought.

 

[C-Phan]

Just be careful with this seller, sometimes the HS reference picture is totally different with the one you'll receive, he probably shoot his first recast then time after time his mold start to tear apart and you get an undersize HS, I ordered a R.Crowe HS and his face was skinny like he was 17 years old.

 

[teabelly83]

Just be careful with this seller, sometimes the HS reference picture is totally different with the one you'll receive, he probably shoot his first recast then time after time his mold start to tear apart and you get an undersize HS, I ordered a R.Crowe HS and his face was skinny like he was 17 years old.

ahh right. thanks alot for that warning!! i just wna find some1 else that does the bald bruce, a good sculpt to

thanks again

 

[Bum]

To be honest, my friend and I used this:

https://www.gijoeelite.com/f_itemPart.asp?strPart=GIVHP-HS01

for our headsculpt to kitbash a Hitman Agent 47 figure.

It's Bruce Willis, but it suited us for Agent 47.

$5.49 plus ship.

They shipped very fast and we were very pleased.

 

[KingGrayskull]

KingGraySkull: Read Gorae post above. I believe these rare and expensive customs are long gone...

Do you know how I can get into contact with Gorae? I really cannot read that page...

 

[teabelly83]

To be honest, my friend and I used this:

https://www.gijoeelite.com/f_itemPart.asp?strPart=GIVHP-HS01

for our headsculpt to kitbash a Hitman Agent 47 figure.

It's Bruce Willis, but it suited us for Agent 47.

$5.49 plus ship.

They shipped very fast and we were very pleased.

Hi bum, thanks for that, i have seen that head b4, on ebay2, altho im not too keen on it. theres something about it i dont like, not sure what but i dont think its avery good bruce likeness?

 

[toyadventurer]

is it, as in how would u say? head to thin, not wide enough, length?

thanks for the help. im finding it hard to find 1 aha. that was the best looking bruce ithought.

Too small, more like 1/7.

 

[teabelly83]

Too small, more like 1/7.

is it, is that a big difference toyadventurer>?? sorry to ask, i jst dnt have experience in sculpting so wondered if that was ALOT smaller than our reg 1/6 heads we see,

thanks!

 

[toyadventurer]

is it, is that a big difference toyadventurer>?? sorry to ask, i jst dnt have experience in sculpting so wondered if that was ALOT smaller than our reg 1/6 heads we see,

thanks!

I don't think you would be happy with it, I wasn't. Here is a picture of another figure that might make it a little easier for you to imagine the size.

 

[teabelly83]

I don't think you would be happy with it, I wasn't. Here is a picture of another figure that might make it a little easier for you to imagine the size.

ahha is that guy from the movies 'puppet marster' lol.

i get what u mean now. its small, lol. but aint there anytype of body that it would fit to make it look ok or is it jst too small for all body types?? dragon, hot toys etc?

thanks again!!

 

[FlyAndFight]

Contact "Miketek" for some great sculpts, which includes Bruce Willis.

https://www.onesixthwarriors.com/forum/showthread.php?t=81330

 

[puremitch]

I know this diver4 seller, I asked him a AD Skinner head sculpt and an Alan Rickman, and he doesn't have any, which means he does not sculpt.

 

[teabelly83]

Contact "Miketek" for some great sculpts, which includes Bruce Willis.

https://www.onesixthwarriors.com/forum/showthread.php?t=81330

hey thanks for that, i jst joined up there. i think that bruce willis head tears of the su version aint that bad is it. is it the same sculpt used for that tears of the sun figuere that was on sale??

thanks

 

[teabelly83]

I know this diver4 seller, I asked him a AD Skinner head sculpt and an Alan Rickman, and he doesn't have any, which means he does not sculpt.

yeah i read he jst recasts others sculpts.

 

[teabelly83]

Don't go with the bald Bruce. It is terribly under sized.

i was looking at both these bruce heads and wondered if they look the same, size wise as u mentioned, i mean the young bruce with hair looks alittle bigger than the bald bruce head. or is it jst my eyes lol

if the young bruce head was more of the right size, could it be altered to look older, i.e. have the hair jst sanded down ?

il ike the bald bruce, i think its a good likeness, but jst the facto f it being small like u pointed out worrys me now .

also, if any1 has bought either of these bruce heads id love to see a photo of em, jst so ican see what the actual item is like. thanks alot!!


compare the 2 and see if they look different, other then the hair obviously.

bald bruce

https://cgi.ebay.com/12-1-6-Custom-...5|66:2|65:12|39:1|240:1318|301:1|293:1|294:50


hair bruce

https://cgi.ebay.com/12-1-6-CUSTOM-...5|66:2|65:12|39:1|240:1318|301:1|293:1|294:50

 

[toyadventurer]

I have all of the heads. here is a picture of two of them side by side. I couldn't find the one with hair but I have it here somewhere and it is the same size as the painted one in the picture. To me the bald in white resin is smaller with a thinner face. If you think you still want to have a go with the white resin bald head let me know and I will send mine to you, no charge.

 

[teabelly83]

I have all of the heads. here is a picture of two of them side by side. I couldn't find the one with hair but I have it here somewhere and it is the same size as the painted one in the picture. To me the bald in white resin is smaller with a thinner face. If you think you still want to have a go with the white resin bald head let me know and I will send mine to you, no charge.

so which head is the painted1 as it is bigger isnt it? and yeah that be great if u could send me the unpainted 1?? pm me and ill send u my addy. is it too small to fit on any of the bodys then or is it cos it looks small??

and if the one with hair is same size as the painted 1 in the pic, then it may be ok?? what u think? i think it would be possible to sand it down to get rid of the hair then paint?? ifu can find the hair 1 id appreciate a picture!!

thanks so much!!

 

[thainer]

I have the bald one on a BBI G1 figure and it doesn`t look too bad. Maybe a touch small but nothing really noticeable.

 

[teabelly83]

I have the bald one on a BBI G1 figure and it doesn`t look too bad. Maybe a touch small but nothing really noticeable.

that samebald one from ebay thainer??? any chance u can get a pic of it??

 

[thainer]

Here is the two diver4 eBay heads. I used the bald one for a Bruce from Hostage when he is in Sherriff mode and the other I used for a 16 Blocks figure (my wife and I actually saw Bruce in downtown Toronto when he was filming 16 Blocks-he had the mustache and grey wig and everything, They were just getting ready to shoot a scene) The only thing with diver4 is his castings are of questionable quality sometimes. The bald one I got from diver4 had a big mold line on the bacl that needed to be dremelled and sanded off. In my opinion the best bald Bruce out there is the Miketek one. I have two, one for my Unbreakable fig and the other for a Diehard 4 fig, which you can kind of see in the background of one pic.

Also bear in mind that Sheriff Bruce is wearing body armor under his uniform.