Hot Toys - MMS DX 11 - TDK: The Joker 2.0 Collectible Figure specs and pics

Shop deals on ebay
Comic concepts
Advertise with us
One sixth kit
Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
alexi.volk said:
i dont know cr0w, i find it hard to believe any joker from HT is better than an adam joker. but that's just me, maybe.
Click to expand...

Hmm maybe this one by Adam is not as good as Hot Toys Joker 2.0?

ada_zps4aed9864.jpg


That oval face looks really weird IMO.
 
alexi.volk said:
i dont know cr0w, i find it hard to believe any joker from HT is better than an adam joker. but that's just me, maybe.
Click to expand...

In terms of likeness, I really don't think they'll ever beat his stuff. The problems I have with a good majority of Adam's stuff is that they feel very lifeless to me. His laughing sculpt and "hit me" sculpt are the exceptions, but the expression on the head I had and the majority of the others, the blank straight-ahead stare, is very much where my issues lie. I can achieve at least 4-5 different looks with my DX11 head based on the eyes and facial expression alone at different angles, and it has a lot more personality to it. With Adam's, you're stuck with one option. And, if you get a bad one, you're SOL because it's not like you can go get a replacement.

I guess I just prefer the DX11 overall because while it may not have that perfect Ledger likeness at every angle, it's much more dynamic. And it does have the likeness at more angles than it doesn't. It feels like I have a dynamic Joker on my shelf as opposed to a photograph of Heath Ledger.

That make much sense?

Darkavatar: I would say that I like the sculpt and PERS and all overall better than EB's effort for the aforementioned reasons when I compared it to Adam's. However, from the intended angle, EB's effort looks better than HT's. I just don't like being limited to one choice for my figure to look good.
 
cr0w said:
In terms of likeness, I really don't think they'll ever beat his stuff. The problems I have with a good majority of Adam's stuff is that they feel very lifeless to me. His laughing sculpt and "hit me" sculpt are the exceptions, but the expression on the head I had and the majority of the others, the blank straight-ahead stare, is very much where my issues lie. I can achieve at least 4-5 different looks with my DX11 head based on the eyes and facial expression alone at different angles, and it has a lot more personality to it. With Adam's, you're stuck with one option. And, if you get a bad one, you're SOL because it's not like you can go get a replacement.

I guess I just prefer the DX11 overall because while it may not have that perfect Ledger likeness at every angle, it's much more dynamic. And it does have the likeness at more angles than it doesn't. It feels like I have a dynamic Joker on my shelf as opposed to a photograph of Heath Ledger.

That make much sense?
Click to expand...

:goodpost:

I know what you mean, I think Adam's main one is mainly like a museum piece that you would see in madame tussauds wax museum, where the Joker 2.0 gives more personality but I still have mixed feelings over it.

cr0w said:
Darkavatar: I would say that I like the sculpt and PERS and all overall better than EB's effort for the aforementioned reasons when I compared it to Adam's. However, from the intended angle, EB's effort looks better than HT's. I just don't like being limited to one choice for my figure to look good.
Click to expand...

I understand, and I agree this Joker does have the best PERS on any DX I have seen but I still hate PERS, as I just think that the system IMO has not been perfected yet. Also like you said in an earlier post, the eyes on this Joker are more deep set than they should be, due to the PERS system, which may be responsible for lack of likeness :dunno

Basically I prefer how Enterbay's one looks more like Ledger while regaining some personality, so IMO you get the best of both worlds in that sense. However, you are right when you say moving the eyes gives you more options/different looks, but that is something doesn't really interest me as I would rather not have to sacrifice realism/likeness for the sake of moving eyes but each to their own. :peace
 
So as most of you know to your annoyance, i got a second Joker set a while back.
I used the first for my custom BoobyC head but I also wanted a stand alone set. Thankfully I sold on most of the main extra parts so it barely cost me anything at the end of the day.

Anyway my point is this, I've had the stock custom Joker 2.0 set up on my desk and whilst working over the last week or so, I've really grown to admire it. I still don't think it's a good Joker/ledger likeness but it does look really quite superb on display if futzed a bit.

I was quite surprised when I got my second set how many variables there were with paint and finish. The standard head looks better than my first one, not at all glossy in comparison, whilst my laughing sculpt has no where near as much white make up on it. I quiet like the look but not sure which I preferred (sold the earlier version). Out of the box my second set needed a lot of futzing, especially the collar and tie, first set was perfect. Anyway it's a lovely set overall. I wish everyone else had theirs so we could get a good across the board comments thing going..
 
Rorywan said:
So as most of you know to your annoyance, i got a second Joker set a while back.
I used the first for my custom BoobyC head but I also wanted a stand alone set. Thankfully I sold on most of the main extra parts so it barely cost me anything at the end of the day.

Anyway my point is this, I've had the stock custom Joker 2.0 set up on my desk and whilst working over the last week or so, I've really grown to admire it. I still don't think it's a good Joker/ledger likeness but it does look really quite superb on display if futzed a bit.

I was quite surprised when I got my second set how many variables there were with paint and finish. The standard head looks better than my first one, not at all glossy in comparison, whilst my laughing sculpt has no where near as much white make up on it. I quiet like the look but not sure which I preferred (sold the earlier version). Out of the box my second set needed a lot of futzing, especially the collar and tie, first set was perfect. Anyway it's a lovely set overall. I wish everyone else had theirs so we could get a good across the board comments thing going..
Click to expand...

Any chance for some comparison pictures?
 
Last edited:
Rorywan said:
So as most of you know to your annoyance, i got a second Joker set a while back.
I used the first for my custom BoobyC head but I also wanted a stand alone set. Thankfully I sold on most of the main extra parts so it barely cost me anything at the end of the day.

Anyway my point is this, I've had the stock custom Joker 2.0 set up on my desk and whilst working over the last week or so, I've really grown to admire it. I still don't think it's a good Joker/ledger likeness but it does look really quite superb on display if futzed a bit.

I was quite surprised when I got my second set how many variables there were with paint and finish. The standard head looks better than my first one, not at all glossy in comparison, whilst my laughing sculpt has no where near as much white make up on it. I quiet like the look but not sure which I preferred (sold the earlier version). Out of the box my second set needed a lot of futzing, especially the collar and tie, first set was perfect. Anyway it's a lovely set overall. I wish everyone else had theirs so we could get a good across the board comments thing going..
Click to expand...

Dont lie you love the fact you're the only one who has this :mad: :pfft:

:lol :1-1:
 
Hopefully I'll have my DX11 ex. next week... Damn shipping time.. Is it because of the holidays in HK/China that things are moving so slowly?
 
Rorywan said:
I wish everyone else had theirs so we could get a good across the board comments thing going..
Click to expand...

Yeah so do I, it is a wonderful figure tailoring and all. The only thing I don't like is the vest its not tight enough. So when you pile on all the clothes the figure looks too bulky IMO. However, you made it look good Rory :wink1:

Also the coat is not good either, but we all know it wouldn't be as it is too thick and furry.


tommyh84 said:
Dont lie you love the fact you're the only one who has this :mad: :pfft:

:lol :1-1:
Click to expand...

He is not the only one now :lol
 

Similar threads

Asta
SooSoo SST-073 Lady Protector (Melissa Benoist Supergirl)
2 3
Replies
44
Views
4K
MrConor212
MrConor212
Godfather1408
Win.c x Soosoo toys - SST075:The Legendary Guitarist
Replies
15
Views
998
Damien
Damien
nitestar
For Sale 1/6 Kingpin, Dark Knight, Batman Begins, Joker, Rocketeer MIB
Replies
6
Views
817
pixletwin
pixletwin
Hologram AI
1/6 SooSooToys - The Flash - The Retrograde Speedster (Reverse Flash) Collectible Figure
2
Replies
25
Views
4K
IBM5100
IBM5100
Hologram AI
1/6 Hot Toys - Batman v Superman - Batman (2.0) Collectible Figure
27 28 29
Replies
575
Views
58K
aksimpson123
A

Latest posts

Back
Top