Chakaman
Super Freak
Absolutely amazing. Nice work!!
McHaleyArt's Custom SW Thread
- Thread starter McHaleyArt
- Start date
Help Support Collector Freaks Forum:
prvtnoclass
Super Freak
Those body mods make a huge difference.
- Joined
- Mar 27, 2007
- Messages
- 2,461
- Reaction score
- 2,694
Concept Boba Fett (modern)
After seeing the various concept art for modern Boba, I was curious to see how he would look in real life. Other factors:
-With the BOBF figure coming, I want something that’s more in contrast.
-Even as a Fett Figure Fanatic, I’m not liking the Arena Fett all that much. From more than a few feet away, it’s like a silhouette. I can’t really see anything. Fett’s armor and accessories need to be seen. I’ll be doing something else with the rest of those pieces.
-I like this concept art with the more traditional look. I added the cod piece back and decided to leave out the cape. With the black, Boba looks both traditional and streamlined.
—Arena Fett suit, pouches, belt, boots and shin tools.
—Repainted Fett everything else with modified rangefinder.
After seeing the various concept art for modern Boba, I was curious to see how he would look in real life. Other factors:
-With the BOBF figure coming, I want something that’s more in contrast.
-Even as a Fett Figure Fanatic, I’m not liking the Arena Fett all that much. From more than a few feet away, it’s like a silhouette. I can’t really see anything. Fett’s armor and accessories need to be seen. I’ll be doing something else with the rest of those pieces.
-I like this concept art with the more traditional look. I added the cod piece back and decided to leave out the cape. With the black, Boba looks both traditional and streamlined.
—Arena Fett suit, pouches, belt, boots and shin tools.
—Repainted Fett everything else with modified rangefinder.
Excellent mods as always! The proportions look so much more natural.
I still don't understand why HT doesn't go for something closer to this, when they have so many modular TT parts nowadays.
Do you happen to know what exact slim DID body you are using?
- Joined
- Mar 27, 2007
- Messages
- 2,461
- Reaction score
- 2,694
I don’t know exactly what figure it’s from. It’s their new advanced slim, shorter at the waist and ankles than other versions.
- Joined
- Mar 27, 2007
- Messages
- 2,461
- Reaction score
- 2,694
The Armorer
This is an odd one. I like the concept of The Armorer, but it’s a pretty bland figure. I wanted to make it more exciting and still keep her close to that in-universe appearance. The fluidity of the costumes in modern Star Wars is like a strange granting of permission to just do whatever I want.
“Imagination”
- SpongeBob Squarepants
*Brought out the Helmet details with some gold dry brushing and minimal copper wash tones.
*Added some strands of Tibetan Lamb Fur to the shawl. It’s a bit wild, but me likey.
*Repainted Shoulder Armor. The trim has a similar reddish tone found on the sleeves. Shoulder mesh plates lightened and detailed.
*Detailed the Chest Armor by dry brushing edges with copper and adding a bit of “dirt.”
*Areas directly above and below the belt lightened in tone and color.
*Repainted Bo Katan Gauntlets and Knee Armor. Elastic bands added to Knee Armor.
*3D printed Jetpack from ThePropeteerStudio. Painted and attached with Magnets.
This is an odd one. I like the concept of The Armorer, but it’s a pretty bland figure. I wanted to make it more exciting and still keep her close to that in-universe appearance. The fluidity of the costumes in modern Star Wars is like a strange granting of permission to just do whatever I want.
“Imagination”
- SpongeBob Squarepants
*Brought out the Helmet details with some gold dry brushing and minimal copper wash tones.
*Added some strands of Tibetan Lamb Fur to the shawl. It’s a bit wild, but me likey.
*Repainted Shoulder Armor. The trim has a similar reddish tone found on the sleeves. Shoulder mesh plates lightened and detailed.
*Detailed the Chest Armor by dry brushing edges with copper and adding a bit of “dirt.”
*Areas directly above and below the belt lightened in tone and color.
*Repainted Bo Katan Gauntlets and Knee Armor. Elastic bands added to Knee Armor.
*3D printed Jetpack from ThePropeteerStudio. Painted and attached with Magnets.
Last edited:
- Joined
- Oct 22, 2006
- Messages
- 1,204
- Reaction score
- 1,953
Very nice work on the mods, details, and improvements. Everything looks like it was always part of the design all along. Also, cool base.
Luke is awesome!!!
prvtnoclass
Super Freak
That's quite impressive!!!
- Joined
- Mar 27, 2007
- Messages
- 2,461
- Reaction score
- 2,694
Ahsoka Tano (Clone Wars)
Sideshow’s Clone Wars line has been quite the head scratcher. It’s a cash cow, not living up to the potential it could because of bad choices. Poorly engineered bodies with shoddy plastic. Odd choices for some of the soft goods and, where Ahsoka is concerned, proportions that are not interpreted from the source material as well as they should have been.
The biggest problem is the shoulders. They are so narrow AND the wrong shape. They make the head look larger than it already is. I get it. It’s supposed to be styled after the exaggerated look from the animated show, but the final product misses the mark. It looks goofy. The body is all kinds of posable and the figure would benefit from action poses, arms out because of the bad proportions.
Here’s just a couple of pics for reference. She’s thin, but the shoulders should be slightly broader and squared off.
…and what we got:
Thanks to pics from Toy Anxiety, I knew that Ahsoka’s forearms and shins would be more than a simple port over to a new body.
The Hot Toys Ahsoka Clone Wars body would have to be heavily modified to accommodate the Sideshow pieces.
-Hot Toys Body:
-Cut rubber arms from the wrist up, exposing the metal that the bracers will slide over.
-Sideshow female wrist pegs (Baroness, I think), modded to fit.
-The rubber part of the body kept folding in making an already loose leg terrible at keeping a pose. Replaced the body below the chest. You can see the neck peg I modified to fit into the head.
-Thinned down the pegs that insert into the shins so I could attach a 3.97mm aluminum tube that will hold the boot.
-The shins have to be cut down and thinned to fit comfortably in the boot. The hole in the shin slightly widened. Fit it all together. Leg-Ka-Bob.
-Henshin Cyborg feet pegs. These have been in my parts box forever and the the ends just happen to fit perfectly snug into the boot and act as ankle pegs. The ends that fit into the aluminum tube are slightly whittled down for a tight fit.
-Test fit, then used Hot Toys CW Ahsoka body suit to smooth out the details. Cut hole in the upper chest to match the SSC Tunic.
This is how it’s looking so far:
-Belt ported over. This looks ok, but the tunic is a little short because of the new body.
-I’ll cut the extra tunic and make a “skirt” with the cut line hiding under the belt. Peel off the loin sash and attach it just under the buckle. The back of the belt will need some added length as well. Detach back pouch. Add some material and reattach the pouch.
-Used some of the extra tunic fabric to make slightly larger wrist joint covers.
-Fini!
Found a thinner body to trim her down some:
Sideshow’s Clone Wars line has been quite the head scratcher. It’s a cash cow, not living up to the potential it could because of bad choices. Poorly engineered bodies with shoddy plastic. Odd choices for some of the soft goods and, where Ahsoka is concerned, proportions that are not interpreted from the source material as well as they should have been.
The biggest problem is the shoulders. They are so narrow AND the wrong shape. They make the head look larger than it already is. I get it. It’s supposed to be styled after the exaggerated look from the animated show, but the final product misses the mark. It looks goofy. The body is all kinds of posable and the figure would benefit from action poses, arms out because of the bad proportions.
Here’s just a couple of pics for reference. She’s thin, but the shoulders should be slightly broader and squared off.
…and what we got:
Thanks to pics from Toy Anxiety, I knew that Ahsoka’s forearms and shins would be more than a simple port over to a new body.
The Hot Toys Ahsoka Clone Wars body would have to be heavily modified to accommodate the Sideshow pieces.
-Hot Toys Body:
-Cut rubber arms from the wrist up, exposing the metal that the bracers will slide over.
-Sideshow female wrist pegs (Baroness, I think), modded to fit.
-The rubber part of the body kept folding in making an already loose leg terrible at keeping a pose. Replaced the body below the chest. You can see the neck peg I modified to fit into the head.
-Thinned down the pegs that insert into the shins so I could attach a 3.97mm aluminum tube that will hold the boot.
-The shins have to be cut down and thinned to fit comfortably in the boot. The hole in the shin slightly widened. Fit it all together. Leg-Ka-Bob.
-Henshin Cyborg feet pegs. These have been in my parts box forever and the the ends just happen to fit perfectly snug into the boot and act as ankle pegs. The ends that fit into the aluminum tube are slightly whittled down for a tight fit.
-Test fit, then used Hot Toys CW Ahsoka body suit to smooth out the details. Cut hole in the upper chest to match the SSC Tunic.
This is how it’s looking so far:
-Belt ported over. This looks ok, but the tunic is a little short because of the new body.
-I’ll cut the extra tunic and make a “skirt” with the cut line hiding under the belt. Peel off the loin sash and attach it just under the buckle. The back of the belt will need some added length as well. Detach back pouch. Add some material and reattach the pouch.
-Used some of the extra tunic fabric to make slightly larger wrist joint covers.
-Fini!
Found a thinner body to trim her down some:
Last edited:
Amazing work, man. The difference is night and day.
I always love seeing extreme body mods like this. Whatever it takes to get the proportions just right.
That Anakin pose is stellar as well.
I always love seeing extreme body mods like this. Whatever it takes to get the proportions just right.
That Anakin pose is stellar as well.
- Joined
- Oct 22, 2006
- Messages
- 1,204
- Reaction score
- 1,953
Awesome work on Snipps McH! And yeah, Anakin's looking epic, Yoda too!
- Joined
- Mar 27, 2007
- Messages
- 2,461
- Reaction score
- 2,694
I won this 1/4 Fett (as is) on eBay for just under $45 shipped. I’m either going to make a Mythos-like version or mod it so I can put the Temmura sculpt from my BOBF on it. I’m leaning towards repainting the armor to look post Sarlacc.
- Joined
- Oct 22, 2006
- Messages
- 1,204
- Reaction score
- 1,953
This a cool project, looking forward to seeing your progress on it.
- Joined
- Mar 27, 2007
- Messages
- 2,461
- Reaction score
- 2,694
Messing around with the DX28, taking the battle damaged parts and cobbling them together with my abundance of Vader parts. I’ve been customizing Vader and Fett the most and the longest and have amassed a good amount of fodder.
In all black, Vader looks menacing no matter what (almost). I wanted to get closer to the David Prowse build of Vader. It pushes the character over the edge of being that much more of a bad ass.
In all black, Vader looks menacing no matter what (almost). I wanted to get closer to the David Prowse build of Vader. It pushes the character over the edge of being that much more of a bad ass.
prvtnoclass
Super Freak
Those are some cool upgrades. We'll done!
- Joined
- Mar 27, 2007
- Messages
- 2,461
- Reaction score
- 2,694
Boba Fett Animated
Wanting an animated style Boba that also fit in with the Clone Wars line, was inspiration to put together this version. Star Wars the Holiday Special was how I was introduced to Fett and probably the reason this color scheme is a favorite. Between that and the Kenner mail-away figure, I was a little confused when Boba showed up in TESB, looking a little greenish.
Fett needed a slimmed posture that fit the Clone Wars/Rebels style but also blended with the physical figures themselves.
The best part; parts! Having customized Fett more than any other figure, I had all the parts I needed. The 3D printed helmet was one I had abandoned as it was just a tad small for the Hot Toys line up, worked perfectly here (mcflyprint3d).
After several fitting tests, exchanging and modifying parts, here is the breakdown;
Body
HT legs & waist. Damn Toys chest rig, Asmus overlay. Generic neck with padding. Generic thin arms, modified HT shoulder housings.
Everything else
Medicom Fett vest with SSC Jango armor. HT Anakin CW shoulder armor. Medi flight suit and knee armor. HT Jango gauntlets with ROTJ Boba attachment. HT Deathwatch belt and Jetpack (SSC Mythos rocket). SSC Mythos cod piece. Medi Boba belt with Marmit pouches. Brown ribbon girth belt with reversed HT Sarlacc Fett girth Belt (ammo belt removed). Hasbro Solo Holster with added leather striping. SSC Jango shin and foot armor dremmeled smooth in back. SSC Animated Ani feet (spikes added) and Kenobi hands. SSC Jango back armor w/magnets. HT Vintage Fett cape. SSC or HT blaster? HT Animated Fett rifle. Modified Medi braid. The back, shoulder and shin armor are attached via Velcro.
Inspiration (I don’t know the artist that did this modified render):
Wanting an animated style Boba that also fit in with the Clone Wars line, was inspiration to put together this version. Star Wars the Holiday Special was how I was introduced to Fett and probably the reason this color scheme is a favorite. Between that and the Kenner mail-away figure, I was a little confused when Boba showed up in TESB, looking a little greenish.
Fett needed a slimmed posture that fit the Clone Wars/Rebels style but also blended with the physical figures themselves.
The best part; parts! Having customized Fett more than any other figure, I had all the parts I needed. The 3D printed helmet was one I had abandoned as it was just a tad small for the Hot Toys line up, worked perfectly here (mcflyprint3d).
After several fitting tests, exchanging and modifying parts, here is the breakdown;
Body
HT legs & waist. Damn Toys chest rig, Asmus overlay. Generic neck with padding. Generic thin arms, modified HT shoulder housings.
Everything else
Medicom Fett vest with SSC Jango armor. HT Anakin CW shoulder armor. Medi flight suit and knee armor. HT Jango gauntlets with ROTJ Boba attachment. HT Deathwatch belt and Jetpack (SSC Mythos rocket). SSC Mythos cod piece. Medi Boba belt with Marmit pouches. Brown ribbon girth belt with reversed HT Sarlacc Fett girth Belt (ammo belt removed). Hasbro Solo Holster with added leather striping. SSC Jango shin and foot armor dremmeled smooth in back. SSC Animated Ani feet (spikes added) and Kenobi hands. SSC Jango back armor w/magnets. HT Vintage Fett cape. SSC or HT blaster? HT Animated Fett rifle. Modified Medi braid. The back, shoulder and shin armor are attached via Velcro.
Inspiration (I don’t know the artist that did this modified render):
Woah, now that is amazing! I don’t have any real affinity for the Holiday Special Fett, but I guess growing up on animated SW adaptations has really just given me an appreciation for that kind of design. Any time I see a custom with animated influence it’s just chef’s kiss.
Great attention to detail. So many parts going into making this that that laundry list of everything is dizzying.
- Joined
- Mar 27, 2007
- Messages
- 2,461
- Reaction score
- 2,694
I have a mental inventory of most parts I’ve amassed over the years. Every once in awhile I come across a forgotten gem (like the Hasbro belt) that works perfectly.Great attention to detail. So many parts going into making this that that laundry list of everything is dizzying.
Similar threads
