1/6 The Batman ‘the drifter’ discussion thread

[DiostaR]

Ok so I might have a solution for a DIY adaptator.

You just take one like these and cut the "ring" part of the peg (in red on the picture) and the little molding left over on the top of it.
Then you could use a dremel to dig a hole and glue a magnet in or just use some electrical tape to add a few layer of thickness to the peg so it hold the headsculpt nice and tight.

I suggest to add a layer of electician tape over the magnet too if you go that route to make sure you have an extra protection so the magnet doesn't unglue and get stuck in the neck of the headsculpt.

 

[DiostaR]

Here's the result. It's not as powerful as the original one but it works.
To make sure it nice and secure you could add another later of tape.

 

[r0cket147]

They ended up saying you'd have to get it separately. But yeah we'll see hoping they make one.

There is hope:

that’s the post:

 

[Hologram AI]

There is hope:

View attachment 699473


that’s the post:

Nice. Happy to see them giving this a lot of attention. This is gonna pair really nicely with the rooted racoon sculpt.

 

[ZaCHw117]

I’m assuming OSK will have this set up for PO?

 

[DiostaR]

I’m assuming OSK will have this set up for PO?

He usually does have Topo stuff on his website.

 

[ZaCHw117]

He usually does have Topo stuff on his website.

Perfect. This will be awesome with the extra Wayne sculpt.

 

[OmarColeccionador]

Maybe it's just me but I prefer to use the Batman suit for the Wayne sculpt

I was never a fan of the drifter Bruce

 

[Chopper Face]

Maybe it's just me but I prefer to use the Batman suit for the Wayne sculpt

I was never a fan of the drifter Bruce

In a thread dedicated to the Drifter outfit, populated by people who desire that look represented in their display- yes- I would imagine you are in the minority here as someone who isn't a fan of it.

 

[OmarColeccionador]

In a thread dedicated to the Drifter outfit, populated by people who desire that look represented in their display- yes- I would imagine you are in the minority here as someone who isn't a fan of it.

just wanted to know why people would like to display the fantastic Bruce sculpt inart or hot toys in that outfit

 

[Chopper Face]

just wanted to know why people would like to display the fantastic Bruce sculpt inart or hot toys in that outfit

Most likely because they'll have suited Batman wearing the cowl.

I will ultimately have a cowled and unmasked Batman, Bruce Wayne, and the Drifter on show.
As you see, I'm not a fan of compromise.

 

[Scout Trooper]

Seems this thread is dead, but there's been some interesting work floating around.

And update from Topo

 

[Luisenigma1]

Seems this thread is dead, but there's been some interesting work floating around.

View attachment 713084

And update from Topo
View attachment 713083

Saw these also. Definitely excited when I can build Drifter Bruce to pair with Batman.

 

[Scout Trooper]

Topo's is looking good, but I wish that vest was longer and more level with the jacket.

Strange, they mentioned once they were doing the gauze hands, yet still nothing has materialized at this stage.

I'd want to use a sculpt with the dripping makeup effect, but I'm unwilling to send my Inart for a repaint, especially when it's looking less likely that it will be as compatible. This was designed with the Hot Toys sculpt in mind. I think they should offer a full figure set as a second option. Recast, and paint the Hot Toys sculpt to make it messier.

 

[Cap'n Cook]

Topo's is looking good, but I wish that vest was longer and more level with the jacket.

Strange, they mentioned once they were doing the gauze hands, yet still nothing has materialized at this stage.

I'd want to use a sculpt with the dripping makeup effect, but I'm unwilling to send my Inart for a repaint, especially when it's looking less likely that it will be as compatible. This was designed with the Hot Toys sculpt in mind. I think they should offer a full figure set as a second option. Recast, and paint the Hot Toys sculpt to make it messier.

Adding that dripping effect is SUPER easy man. No need to send it off for a repaint for that.

 

[Scout Trooper]

Adding that dripping effect is SUPER easy man. No need to send it off for a repaint for that.

Really? What's the best way to go about doing it? I've seen some examples that weren't very good. I'm also really bad with paint, lol

 

[Cap'n Cook]

Really? What's the best way to go about doing it? I've seen some examples that weren't very good. I'm also really bad with paint, lol

You just need to water down some black acrylic to create a wash and then apply it as desired. I’ll probably be doing it with my sculpt too.

 

[Scout Trooper]

You just need to water down some black acrylic to create a wash and then apply it as desired. I’ll probably be doing it with my sculpt too.

Yeah, but it's the application part, and getting it to look natural at that scale that seems to be the difficult part.

Also, you don't want him to look like he's crying

 

[Cap'n Cook]

Yeah, but it's the application part, and getting it to look natural at that scale that seems to be the difficult part.

Also, you don't want him to look like he's crying

Yeh I get your concern. It’s a lot of trial and error but not overly difficult to do.

I’ll likely do mine and post the results. If you like what you see I’d be happy to do yours for free.

 

[MrRiddler]

Seems this thread is dead, but there's been some interesting work floating around.

View attachment 713084

And update from Topo
View attachment 713083

The present toys version has exceeded my expectations, I like it. I’ll wait and see the price point for TOPO to make a call on which one I get.