ENTERBAY 1:4 HD Masterpiece Series-Terminator 2-BD T-800 Full Specs and Pics

[a-dev]

Hi all, just received mine from Italy, awesome piece but the eye led doesn't turn on and the switch behind the head looks like it's blocked...And got the loose leg problem

Can anyone help this fellow? I never had these issues and didn't do any reading on them that I can remember.

 

[TEEDA]

Can anyone help this fellow? I never had these issues and didn't do any reading on them that I can remember.

Thanks a-dev, well I also did got the original T-800 with a loose right arm and loose leg...AM pretty amazed by the battle damaged but damn, just having the same loose leg problem is killing me.
ALso the LED eye which doesn't want to light up...have unlocked the switch but nothing happens. Didn't find any tutorial to see where and how to check the battery.

Here 's a pic of the figure, tried to stand it but the left leg is wayy shorter than the other.

 

[Spiker]

I just "repaired" a Joker yesterday. Best you undress the figure and look at the mechanism of the legs. Once you see and understand how it works you can adjust the shorter leg. No Problem at all. Sometimes one of the legs is stuck and you get it loose with quite some force only.
Some loose Joints can be tighten by screws.
Some legs Need the buckle trick where you push the shin completly back up high to the thigh until you hear a click noise.

About the light: You Need to remove the head to get to the batteries. Maybe there is still some protection plastic in it or the batteries are flat.
Sometimes you have to push the button on the back of the head a Little harder.

 

[a-dev]

Thanks a-dev, well I also did got the original T-800 with a loose right arm and loose leg...AM pretty amazed by the battle damaged but damn, just having the same loose leg problem is killing me.
ALso the LED eye which doesn't want to light up...have unlocked the switch but nothing happens. Didn't find any tutorial to see where and how to check the battery.

Here 's a pic of the figure, tried to stand it but the left leg is wayy shorter than the other.

The leg problem looks ridiculous. Hope you can get that sorted. He otherwise looks great though. The weathering to the clothes shows up really well in your pic, I've always kinda wondered why some people don't like it - other than the scissors cuts to the lapel.

 

[TEEDA]

I just "repaired" a Joker yesterday. Best you undress the figure and look at the mechanism of the legs. Once you see and understand how it works you can adjust the shorter leg. No Problem at all. Sometimes one of the legs is stuck and you get it loose with quite some force only.
Some loose Joints can be tighten by screws.
Some legs Need the buckle trick where you push the shin completly back up high to the thigh until you hear a click noise.

About the light: You Need to remove the head to get to the batteries. Maybe there is still some protection plastic in it or the batteries are flat.
Sometimes you have to push the button on the back of the head a Little harder.

The leg problem looks ridiculous. Hope you can get that sorted. He otherwise looks great though. The weathering to the clothes shows up really well in your pic, I've always kinda wondered why some people don't like it - other than the scissors cuts to the lapel.

Alright guys, you are awesome thank you so very much. So I removed the head and yeah still had the plastic thing behind the switch. Wonder why they didn't put any manual guide or paper to make people notice it.
SO as for the loose leg, it sall repaired, only had to unzip the leather pant of the left leg, bend the leg to its maximum until the " crack noise ' then unbend it.

thanks for the help

here few pics of it.

 

[paramoremcr88]

Selling my BD T-800 if any UK guys are after one?

https://www.sideshowcollectors.com/forums/showthread.php?t=127941

 

[Spiker]

@Teeda: Glad i could help

 

[Kbx82]

Selling my BD T-800 if any UK guys are after one?

https://www.sideshowcollectors.com/forums/showthread.php?t=127941

Really ... Hope you won"t regret !

 

[paramoremcr88]

Really ... Hope you won"t regret !

Nah, it's cool. Selling it due to my lack of space for displaying 1/4 figures as well as I'd like to. Plus, I'm getting the DX13, so I'll still have a BD T-800.

 

[Kbx82]

Nah, it's cool. Selling it due to my lack of space for displaying 1/4 figures as well as I'd like to. Plus, I'm getting the DX13, so I'll still have a BD T-800.

Do you prefer the lioness on the DX13 over the EB version, really ?

 

[paramoremcr88]

Do you prefer the lioness on the DX13 over the EB version, really ?

Haven't seen the final sculpt(s) on the DX13 yet, but will do soon, so can't say which likeness I prefer. But it's not about that for me. It's down to the space I have to display them in. I have much more room to display 1/6 than I do for 1/4. The only 1/4 I'm keeping are EB Bats and the QS001. If display space was no concern, I'd be keeping this.

 

[Minimodel]

Do you prefer the lioness on the DX13 over the EB version, really ?

Hot Toys have nt released any Born Free figures yet.

 

[paramoremcr88]

Hot Toys have nt released any Born Free figures yet.

....

 

[IronManny]

This figure is $425 shipped from Midtown Comics. $375 plus shipping.

 

[Stachel]

This figure is $425 shipped from Midtown Comics. $375 plus shipping.

url? Can't find this. Thanks.

 

[IronManny]

url? Can't find this. Thanks.

was at midtowncomics.com

But, they sold out last night.

Sorry


If you google the figure, other places have it a similar price like:
https://toywars.com/products/dcd527573?utm_source=googlepla&utm_medium=cpc

But, I never shopped at some of these places, so you are taking a chance. I shop at Midtown often.

 

[Stachel]

If you google the figure, other places have it a similar price like:
https://toywars.com/products/dcd527573?utm_source=googlepla&utm_medium=cpc

But, I never shopped at some of these places, so you are taking a chance. I shop at Midtown often.

Thanks. Still waiting for my BBTS order placed last May.

 

[krec9]

Imo this looks better then the new dx 13 I dunno what to get.

 

[IronManny]

Imo this looks better then the new dx 13 I dunno what to get.

Based on the posted pics, I agree with you. I ordered this on the weekend and it comes today!

But I will be too busy drowning in Xbox One for the next few days to open it up.

Will post pics when I can.

 

[HeubertMichael]

Imo this looks better then the new dx 13 I dunno what to get.

If you could only get one, I guess asking yourself one question can help you decide. What scale would you like to place on your shelf to represent the icon that is BD T800?

IMO both figures are great representations of the character in BD form, and it all boils down now to which scale you'd prefer. DX13 turned out to be the perfect 1/6 embodiment of it so far, while EB's got 1/4 scale covered. I think the scale difference is the only objective thing here as battle for the better sculpt would get subjective votes.

I have EB and to me it's one of the greatest collectibles ever produced even outside of the Terminator franchise