Enterbay Game of Death 1/6 2010

[Lawrence]

While googling images for the EB Kato figure I found this:

I don't know who to credit (foreign language) for the pic, but it was linked here:

WARNING

My comp lags when I enter this site

I did manage to see a few more pics of the figure & other BL related photos, but the lag was a bit much, so I closed it. I tried the site again later, still lag

 

[draco76x]

Hi Guys,

I want to get an RM-X body & fit Enterbay's FOF head on it, is it possible??

What I know that the neck peg is different, but saw some of the guys doing a "Great" mod, just want to find out how modify or get the right neck peg to fit, any help??

Rgds

 

[mrchris]

Hi Guys,

I want to get an RM-X body & fit Enterbay's FOF head on it, is it possible??

What I know that the neck peg is different, but saw some of the guys doing a "Great" mod, just want to find out how modify or get the right neck peg to fit, any help??

Rgds

you will need a ball neck peg with a shaft on the end (as on the new GOD heads).i pulled the one off my head and tried a FOF AND ETD they both fitted ok..as pic shows

 

[draco76x]

you will need a ball neck peg with a shaft on the end (as on the new GOD heads).i pulled the one off my head and tried a FOF AND ETD they both fitted ok..as pic shows

Chris, thanks for the reply, btw, are there anyway to buy "spare" ball neck peg with a shaft?? Search ebay but found nothing expect hottoys neck peg....

 

[mrchris]

the hot toys smileys suit/casual heads fit the RM-X BUT you would need to sand the top(bigger) ball down or measure the shaft, if its long enough cut the ball off.i assume most HT pegs like that would do.if you know someone with a spare peg
try it 1st.will up a pic to show you

 

[mrchris]

the hot toys smileys suit/casual heads fit the RM-X BUT you would need to sand the top(bigger) ball down or measure the shaft, if its long enough cut the ball off.i assume most HT pegs like that would do.if you know someone with a spare peg
try it 1st.will up a pic to show you

enterbay on left.hot toys on right..shaft seems big enough

 

[mrchris]

For those of you who are willing to throw money down the toilet (you guys )

Casual - $119.99 'Buy It Now' (Free Shipping)
Suit - $119.99 'Buy It Now' (Free Shipping)

I don't think I've purchased from this seller before, but I think I would have tried it. I'm expecting to pay for Spidey this week, & I don't know if I need to have money ready this week as well for Bats. So if it wasn't for that, I would be considering buying the suit version (maybe both). They still look cool to me

"One man's trash, is another man's treasure"

Also, I see some flipping potential in these over here

if this is the seller..ning_quinox ive bought stuff from him..arrived within 7-10 days to the UK..tracking included no problems..(for me anyway)

 

[Rogerbee]

While googling images for the EB Kato figure I found this:

I don't know who to credit (foreign language) for the pic, but it was linked here:

WARNING

My comp lags when I enter this site

I did manage to see a few more pics of the figure & other BL related photos, but the lag was a bit much, so I closed it. I tried the site again later, still lag

Nice!

I didn't have any lag problems, I even got Chrome to translate the site. One thing I have noticed with early issue GOD bodies are the nipples, they are either poorly painted or look to have nearly worn off. The ones on mine are fine.

CHEERS!

 

[mrchris]

Chris, thanks for the reply, btw, are there anyway to buy "spare" ball neck peg with a shaft?? Search ebay but found nothing expect hottoys neck peg....

if you decide to try the HT neck peg and custom it..here's a great seller and the cheapest ive seen on ebay
https://www.ebay.co.uk/itm/Hot-Toys...366?pt=LH_DefaultDomain_0&hash=item3369ad805e

 

[Rogerbee]

Interesting, if you look at the pic of it next to the ruler, the 1" line looks almost to be where you'd cut it to be the same length as the EB peg.

CHEERS!

 

[draco76x]

if you decide to try the HT neck peg and custom it..here's a great seller and the cheapest ive seen on ebay
https://www.ebay.co.uk/itm/Hot-Toys...366?pt=LH_DefaultDomain_0&hash=item3369ad805e

Chris, tks for the info & helps.

 

[mrchris]

what a coincidence ..who'd have thought that LOL

 

[ahgnus]

I decided to repaint the Beijing GOD head from scratch. Before I dipped the head into the solution to strip the paint, I removed the Evision system to prevent any damage to the mechanism or the eyeballs. Take a look.

My Evision came with straight eyes, but for the folks who have unfortunately received crooked eyes, I tried to figure out how the eyes went out of alignment and what can be done to correct it. Looking at the Evision setup, it seems impossible that the eyes were somehow "shaken" out of place during shipment. It had to be a more fundamental problem. The eyeballs are connected together by a pivot link, and the control arm end of the pivot link is inserted into finger ball that controls the eye movement. I could only think of 2 ways that can cause crooked eyes in this setup. Either the holes for connecting pins weren't placed correctly on the pivot link and/or the eyeballs, or the backing plate for the eyeballs were defective thus throwing the eyes out of alignment. Any other guesses?

 

[mrchris]

I decided to repaint the Beijing GOD head from scratch. Before I dipped the head into the solution to strip the paint, I removed the Evision system to prevent any damage to the mechanism or the eyeballs. Take a look.

My Evision came with straight eyes, but for the folks who have unfortunately received crooked eyes, I tried to figure out how the eyes went out of alignment and what can be done to correct it. Looking at the Evision setup, it seems impossible that the eyes were somehow "shaken" out of place during shipment. It had to be a more fundamental problem. The eyeballs are connected together by a pivot link, and the control arm end of the pivot link is inserted into finger ball that controls the eye movement. I could only think of 2 ways that can cause crooked eyes in this setup. Either the holes for connecting pins weren't placed correctly on the pivot link and/or the eyeballs, or the backing plate for the eyeballs were defective thus throwing the eyes out of alignment. Any other guesses?

both could be the cause i suppose..by the way when did bruce guest star on supernatural ..(demon bruce eh)

 

[Rogerbee]

Looking good so far, on heads without Evision, ie earlier and later heads, how would you go about removing those eyes? I'd imagine you'd have to be careful.

I look forward to seeing the finished result

CHEERS!

 

[Lawrence]

if this is the seller..ning_quinox ive bought stuff from him..arrived within 7-10 days to the UK..tracking included no problems..(for me anyway)

Thanks for telling me that

Hmmm ..... $119.99 with free shipping ..... What to do, what to do

I didn't have any lag problems, I even got Chrome to translate the site.

It worked when I tried it again I noticed it has a pic posted there that I took of the BD head sculpt

 

[Lawrence]

My Evision came with straight eyes, but for the folks who have unfortunately received crooked eyes, I tried to figure out how the eyes went out of alignment and what can be done to correct it. Looking at the Evision setup, it seems impossible that the eyes were somehow "shaken" out of place during shipment. It had to be a more fundamental problem. The eyeballs are connected together by a pivot link, and the control arm end of the pivot link is inserted into finger ball that controls the eye movement. I could only think of 2 ways that can cause crooked eyes in this setup. Either the holes for connecting pins weren't placed correctly on the pivot link and/or the eyeballs, or the backing plate for the eyeballs were defective thus throwing the eyes out of alignment. Any other guesses?

I don't fully understand what you wrote concerning the EVision system, but my plan to send it back to be replaced seems to be the right choice. I don't think I want to bother fixing the crooked eyes on my BD head

 

[Y4NK33 PL4N3T]

While googling images for the EB Kato figure I found this:

Hate it. Looks like he has T Virus from Resident Evil

 

[mrchris]

Thanks for telling me that

Hmmm ..... $119.99 with free shipping ..... What to do, what to do


It worked when I tried it again I noticed it has a pic posted there that I took of the BD head sculpt

cant see you getting a cheaper price than that..i prefer the casual figure..but thats just me

 

[GungFu]

This your first EB/HT figure? I don't remember you mentioning any other figures

Nope, I got the first "Game of Death", "The Way of the Dragon", both "Enter the Dragon" (A&B) and "Kato". Did not get the HT DX "Enter the Dragon" figure.

a male model im not..but here yah go..again blame the camera

Thank you Mr.Chris !!! I think you model it pretty good my friend

Thanks, even the mark on his wrist is nothing much & it'll probably just rub off but what a set. For any BL fan not to have this figure is seriously missing out. Now I just want EB or HT to announce WOTD soon

Congrats DirtyPrettyAngel!

I hope the marking from the dark bracelet can be fixed or you are okay with it, but if you're not then you could just contact EB and ask to exchange to a brand new body - the separate boxed RM-X body release is really great !

Yay Gung Fu!!!

Yeah it fits just fine! I just tried it out, and it actually looks quite good!

Thanx Ahgnus !

Okay, thank you for that feedback