DarthCipan, great figure!! about the light problem, hottoys must to have care with that details, are very important
Just received this yesterday and the light for the head do not work. What is the best way to take out the batteries. Should I pull the neck piece out or leave it in. What type of screw driver. I’m afraid of stripping the screws.
The brightness is great.
And you acchieved just by turning the led inside the neckpost?
Replace with a shorter "white" LED that allows me to rotate it within the space in the bulb.
You should be able to cut/saw/file the default "red" LED shorter and rotate it.. (As I said the red LED is blindingly bright at the correct angle.)
Replace with a shorter "white" LED that allows me to rotate it within the space in the bulb.
You should be able to cut/saw/file the default "red" LED shorter and rotate it.. (As I said the red LED is blindingly bright at the correct angle.)
I'll add a disclaimer: I'm not responsible if you kill your LED.
Very small "Philips head" screw driver ... I believe 1.7 to 2mm will suffice
Modding WM's LED at the neck
Replacing red LED to white (half height type), angling the LED at around 80 degrees from vertical, directly in-front of the eye-slit/slot in the head socket.
The red LED at the neck is actually very bright, but main intensity of the LED is angled 90 degrees away from the eye slot.
Adding reddish filter between the plastic eyes (long, flat, deep transparent plastic) and the light source, may try out other filters for a better outcome.. It's more pinkish than purple-ish as of now..
Theres a pinups thread?
anyone received theirs from Loontentoys?
I have trouble closing the shoulder rockets down fully.
I believe there is some kind of clip in the silver part which you slide down - however I can't seem to get it to go in. Anyone help me with that?
Enter your email address to join: