Hot Toys TDKR: 1/4th scale Batman [QS001] - Full Reveal & Specs

[Darkavatar]

I used the flush base for all three:



But what they don't mention is that two screws will be sticking out on the base itself a bit. I sanded them down and added these (whatever they're called) under the display stands of the figures to give them some slight height.

Shipping:
https://www.sora-shop.com/Shipping-Rates



But I thought that finding display cases was much easier in the US? I think you could find clean ones without screws and nuts showing. I would have preferred that personally.



Thanks and yes, the T-800 BD is a must! Best collectible I own!

I have had my eye on this piece for a while now but I was trying to resist the urge to buy it as I can't afford it, with all the other stuff that is coming out and need to spend the money on other things than these dam collectibles like food and rent!

 

[HeubertMichael]

I have had my eye on this piece for a while now but I was trying to resist the urge to buy it as I can't afford it, with all the other stuff that is coming out and need to spend the money on other things than these dam collectibles like food and rent!

Save up for the EB BD T800 if you could, man. Definitely one of the best collectibles ever produced. QC issues on it are very rare, too.

It would look good with any or all of the following -- EB Batman, Joker, and of course QS001.

 

[Darkavatar]

Save up for the EB BD T800 if you could, man. Definitely one of the best collectibles ever produced. QC issues on it are very rare, too.

Thanks for the advice!

You are right such an amazing piece, hopefully one day I will get it!

Yeah have not heard one bad thing about it as far QC goes.

It would look good with any or all of the following -- EB Batman, Joker, and of course QS001.

You are so right Drac's pics are proof of that, I feel like I am looking at a museum of works of art on display! :eek

 

[pturtle]

Hey guys, kind of new to the figure collecting, but I was interested in getting a 1/4 scale Batman. I wanted to know should I wait for this guy and pay more, or go with the enterbay one.

I personally think the enterbay one looks better, but this one is newer, and I hear enter bay figures tend to have quality issues.

 

[Nightwing_000]

Hey guys, kind of new to the figure collecting, but I was interested in getting a 1/4 scale Batman. I wanted to know should I wait for this guy and pay more, or go with the enterbay one.

I personally think the enterbay one looks better, but this one is newer, and I hear enter bay figures tend to have quality issues.

Its not about QC issues, i know 3 people who bought the enterbay batman and there were no major issues. It all ends on what suit you prefer. Iv always liked TDK suit so iv pre ordered 2 of these guys and havnt really gone with te other suit. Whatever takes your fancy...

 

[SueAsideRide]

I'll probably get Enterbay's Begins suit only if HT isn't gonna make one.

 

[adamreese2006]

Hey guys, kind of new to the figure collecting, but I was interested in getting a 1/4 scale Batman. I wanted to know should I wait for this guy and pay more, or go with the enterbay one.

I personally think the enterbay one looks better, but this one is newer, and I hear enter bay figures tend to have quality issues.

I had alot of QC issues with my enterbay batman. 1 leg longer/ bent cowl/ dented in arm/ bent gauntlet. I sent it back for a refund after reading others had similar problems... Mainly 1 leg longer than the other

 

[Gigerfan]

It's always a hit and miss affair with Enter bay. They have had some great head sculpts lately but everything else is poor quality compared with Hot Toys.

 

[xpl0sive]

I'll probably get Enterbay's Begins suit only if HT isn't gonna make one.

HT is making one, according to a member on here.

 

[Agen]

Credit : Mark Alibayan

 

[Agen]

1/4 Bat profile view

Credit : Mark Alibayan

 

[Nightwing_000]

Credit : Mark Alibayan

I just noticed his bat crotch lol isnt it a bit "joel schumacher"..?

 

[Geil]

Is this not the same one but in 1/4?

https://www.ebay.com.au/itm/Legend-...D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557

Yes yes. The 1/6 cost me locally the same as the eBay listing +Tx and my local 1/4 was $100+Tx so I was expecting to see it on eBay for U$100 shipped but no luck so far. The XL shop is even cheaper but dunno about shipping cost. But it is a lil easier to buy it for just a tad more than U$100 than wow £160 I saw someone mention



"Resistance is Futile"

 

[Darkavatar]

Yes yes. The 1/6 cost me locally the same as the eBay listing +Tx and my local 1/4 was $100+Tx so I was expecting to see it on eBay for U$100 shipped but no luck so far. The XL shop is even cheaper but dunno about shipping cost. But it is a lil easier to buy it for just a tad more than U$100 than wow £160 I saw someone mention



"Resistance is Futile"

So glad that is the right one, the idiot seller on ebay would not tell me the internal measurements so now I know this is the same box for the measurements you gave me!

Thank you once again Geil, you are terrific!

 

[Geil]

No problemo. Easy job the guy probably never opened and setup one and hence didn't want to go through it. Wish it would even cheaper than I would just keep getting these. Saw some pictures where they had a bunch of these in 1/6 side be side without the side panels on the inside forming a larger lit case

And to get back on topic I CAN'T WAIT FOR THIS BAT TO BE IN MY HANDS!!!!!
PS didn't bother putting other figures into this case yet. My EB Bat & Joker are in Besta setup and I am not rearranging any more things until I can figure out what I am going to do w all these bats I have and this coming and all my other stuff. My other display already looks no good as its top cramped and I can't stand it . I need to more space!!!

"Resistance is Futile"

 

[pturtle]

I had alot of QC issues with my enterbay batman. 1 leg longer/ bent cowl/ dented in arm/ bent gauntlet. I sent it back for a refund after reading others had similar problems... Mainly 1 leg longer than the other

Wow did you end up getting another one? I like the sculpt on the Enterbay one more compared to what I am seeing on this so far, but This one seems to have people more excited.

 

[Matt83]

I'm probably going to get the case from Sora shop, price quoted from them was €62 for the dimensions Dracula gave me earlier, downside is you have to do your own lighting. They also say you can have a reflective or basic transparent back panel, and I was just wondering what people thought about having a reflective back, as I think that's what I'm going to go for

 

[adamreese2006]

Wow did you end up getting another one? I like the sculpt on the Enterbay one more compared to what I am seeing on this so far, but This one seems to have people more excited.

I decided just to get a refund after reading other people having similar QC issues + the figure didn't make me go wow! like I thought it would after seeing all the photos...

 

[pturtle]

I decided just to get a refund after reading other people having similar QC issues + the figure didn't make me go wow! like I thought it would after seeing all the photos...

Ah okay, well I’m going to order it off BBTS, and if there is no problems I’m keeping him. If there is a problem do you think they would refund my purchase? I read people saying a lot of good things about them.

 

[adamreese2006]

Ah okay, well I’m going to order it off BBTS, and if there is no problems I’m keeping him. If there is a problem do you think they would refund my purchase? I read people saying a lot of good things about them.

I'm from the Uk but I'm sure BBTS will exchange or refund if there is any QC problems.