InArt: The Lord of the Rings - Aragorn 1:6

[Scout Trooper]

Is this figure divisive though?

That's not the impression I'm getting.

I know people have different preferences for the hair styling / coloring, but I think most (if not everybody) considers this a pretty solid release.

If you're completely dissatisfied with this figure (QC aside), then I'm not sure what licensed figures you're collecting that set a much higher standard.

 

[HyperDrive]

Is this figure divisive though?

That's not the impression I'm getting.

I know people have different preferences for the hair styling / coloring, but I think most (if not everybody) considers this a pretty solid release.

If you're completely dissatisfied with this figure (QC aside), then I'm not sure what licensed figures you're collecting that set a much higher standard.

The @Gipetto0812 standard. I’d love to know what those are for mass production.

 

[Scout Trooper]

The @Gipetto0812 standard. I’d love to know what those are for mass production.

I haven't heard Gipetto's opinion on this.

But this is as good as it gets for licensed figures. If you're going in with higher expectations, you're setting yourself up for disappointment. (Unless it's a QC problem).

Inart's QC keeps me up at night.

 

[i_amjam]

Is this figure divisive though?

That's not the impression I'm getting.

I know people have different preferences for the hair styling / coloring, but I think most (if not everybody) considers this a pretty solid release.

If you're completely dissatisfied with this figure (QC aside), then I'm not sure what licensed figures you're collecting that set a much higher standard.

This is the only Inart figure I've received with an actual QC issue Hopefully I can get a replacement sword soon

 

[Scout Trooper]

This is the only Inart figure I've received with an actual QC issue Hopefully I can get a replacement sword soon

****.. What happened?

I won't be able to inspect my figure until the end of the month probably.

I'm terrified.

 

[i_amjam]

****.. What happened?

I won't be able to inspect my figure until the end of the month probably.

I'm terrified.

my issue was one I haven't seen anyone else say, but the tip of the sword was chipped off in the package. no idea what could have caused that to happen.

Edit: I wouldn't worry too much @Scout Trooper even with that issue this figure is one of my all time favorites.

 

[HyperDrive]

I haven't heard Gipetto's opinion on this.

But this is as good as it gets for licensed figures. If you're going in with higher expectations, you're setting yourself up for disappointment. (Unless it's a QC problem).

Inart's QC keeps me up at night.

Totally fair. I just think certain collectors have insane and unreasonable standards set for themselves with INART figs, which will lead to disappointment. Like you said, it’s as good as it gets for a licensed (mass produced) figure, despite inaccuracies or other design flaws they may have.

INART’s QC is an issue no doubt. They need to standardize their QC processes across all factories they employ. And it seems like they're not all in check yet.

 

[Gipetto0812]

The @Gipetto0812 standard. I’d love to know what those are for mass production.

I haven't said anything about being dissatisfied with this Aragorn figure which is what @Scout Trooper was referencing, not other figures. Just b/c I agreed with a lot of Brett's points, doesn't mean I don't like this release. Heck, I spent hours redoing the hair on this figure And I mentioned that I was thankful I didn't get any QC problems with this figure.

Harry Potter was the one I expected more from since I did have QC issues (regardless if they are perceived by others as minor or otherwise); though, I've mentioned in that thread that I've come around on it after spending more time on it.

TDK Joker I've been disappointed with since the get go and still am. I'm only keeping for the accessories and the thought of getting the heads redone.

I've had an overall positive impression of Superman and have said as much in my review despite having to scrub that paint off the eyeballs along with a few other things that aren't great on it.

Just b/c you're more forgiving of the QC issues that some of us have experienced, doesn't make them any less valid of a reason(s) for being disappointed with what we're receiving when they occur.

 

[HyperDrive]

I haven't said anything about being dissatisfied with this Aragorn figure which is what @Scout Trooper was referencing, not other figures. Just b/c I agreed with a lot of Brett's points, doesn't mean I don't like this release. Heck, I spent hours redoing the hair on this figure And I mentioned that I was thankful I didn't get any QC problems with this figure.

Harry Potter was the one I expected more from since I did have QC issues (regardless if they are perceived by others as minor or otherwise); though, I've mentioned in that thread that I've come around on it after spending more time on it.

TDK Joker I've been disappointed with since the get go and still am. I'm only keeping for the accessories and the thought of getting the heads redone.

I've had an overall positive impression of Superman and have said as much in my review despite having to scrub that paint off the eyeballs along with a few other things that aren't great on it.

Just b/c you're more forgiving of the QC issues that some of us have experienced, doesn't make them any less valid of a reason(s) for being disappointed with what we're receiving when they occur.

I’m aware Scout is referencing Aragorn in particular, but the sentiment he referenced can essentially be applied to all INART figures, IMO.

And I should’ve expanded, but this goes out to anyone and everyone, not specifically singling you out.

I do think some collectors have an even higher standard which of course, is a set up for failure ending with disappointment.

 

[i_amjam]

I haven't said anything about being dissatisfied with this Aragorn figure which is what @Scout Trooper was referencing, not other figures. Just b/c I agreed with a lot of Brett's points, doesn't mean I don't like this release. Heck, I spent hours redoing the hair on this figure And I mentioned that I was thankful I didn't get any QC problems with this figure.

Harry Potter was the one I expected more from since I did have QC issues (regardless if they are perceived by others as minor or otherwise); though, I've mentioned in that thread that I've come around on it after spending more time on it.

TDK Joker I've been disappointed with since the get go and still am. I'm only keeping for the accessories and the thought of getting the heads redone.

I've had an overall positive impression of Superman and have said as much in my review despite having to scrub that paint off the eyeballs along with a few other things that aren't great on it.

Just b/c you're more forgiving of the QC issues that some of us have experienced, doesn't make them any less valid of a reason(s) for being disappointed with what we're receiving when they occur.

as an aside @Gipetto0812 do you have any pics of your old MoS custom? been thinking about getting that figure done.

 

[Brett Banner]

I haven't said anything about being dissatisfied with this Aragorn figure which is what @Scout Trooper was referencing, not other figures. Just b/c I agreed with a lot of Brett's points, doesn't mean I don't like this release. Heck, I spent hours redoing the hair on this figure And I mentioned that I was thankful I didn't get any QC problems with this figure.

Harry Potter was the one I expected more from since I did have QC issues (regardless if they are perceived by others as minor or otherwise); though, I've mentioned in that thread that I've come around on it after spending more time on it.

TDK Joker I've been disappointed with since the get go and still am. I'm only keeping for the accessories and the thought of getting the heads redone.

I've had an overall positive impression of Superman and have said as much in my review despite having to scrub that paint off the eyeballs along with a few other things that aren't great on it.

Just b/c you're more forgiving of the QC issues that some of us have experienced, doesn't make them any less valid of a reason(s) for being disappointed with what we're receiving when they occur.

In the wise words of Sven the Reindeer from Frozen: “You feel what you feel, and your feelings are real.”

That is, unless you have a negative opinion/experience with a doll that someone else loves. Then your feelings are insane/unreasonable/hyperbolic lol.

 

[Rzeznikk]

In the wise words of Sven the Reindeer from Frozen: “You feel what you feel, and your feelings are real.”

That is, unless you have a negative opinion/experience with a doll that someone else loves. Then your feelings are insane/unreasonable/hyperbolic lol.

You seem upset and fixated that people find your opinion hyperbolic for some reason.

 

[HyperDrive]

In the wise words of Sven the Reindeer from Frozen: “You feel what you feel, and your feelings are real.”

That is, unless you have a negative opinion/experience with a doll that someone else loves. Then your feelings are insane/unreasonable/hyperbolic lol.

Idk man, but I think there’s a level of objectivity here despite the overall subjective nature of this hobby. INART figs are aesthetically good, overall best in the 1/6 licensed game.

And lol, picking on Rzeznikk again.

 

[Rzeznikk]

There's a couple custom options in the works for the ranger cloak:
https://onesixthkit.com/index.php?route=product/product&product_id=5653&search=ranger
https://customonesixth.com/threads/...-cloak-aragorn-fellowship-of-the-ring.196539/

Yes this is correct and thank you for the shout out. 2DOUBLE8IGHT run has 3 spots remaining and then I will close the run.

 

[Rzeznikk]

Idk man, but I think there’s a level of objectivity here despite the overall subjective nature of this hobby. INART figs are aesthetically good, overall best in the 1/6 licensed game.

And lol, picking on Rzeznikk again.

I mean really. If InArt Argaorn is Caveman Jesus. Then what on Earth do we call the two Asmus Attempts? Or the ACI? Cave Troll Jesus?

I mean really.

 

[HyperDrive]

I mean really. If InArt Argaorn is Caveman Jesus. Then what on Earth do we call the two Asmus Attempts? Or the ACI? Cave Troll Jesus?

I mean really.

Banner is entitled to his opinion, but just like they are, I think we’re also entitled to disagree with said opinion and to call it hyperbolic lol.

Idk what else the other attempts would be called, aside from ‘sh*t’?

 

[Gipetto0812]

I’m aware Scout is referencing Aragorn in particular, but the sentiment he referenced can essentially be applied to all INART figures, IMO.

And I should’ve expanded, but this goes out to anyone and everyone, not specifically singling you out.

I do think some collectors have an even higher standard which of course, is a set up for failure ending with disappointment.

While I agree with that, I also think the price that InArt are charging set themselves up as the premiere 1/6 figure company and therefore bring out that higher expectation among collectors, myself included.. What I've finding and am adjusting to for my opinion of them are that to me I'm not finding them that much better than HT if at all in some cases; so, I need to lower my expectations which I think helped in my overall impression with BvS Superman. Though, I do like their finer, more human paint apps at least for HP and BvS Sups headsculpts vs the sort of more blanket production paint apps HT tend to do for every human character.

as an aside @Gipetto0812 do you have any pics of your old MoS custom? been thinking about getting that figure done.

Thanks for asking about it! Sent you a PM with all the info/pics I have

In the wise words of Sven the Reindeer from Frozen: “You feel what you feel, and your feelings are real.”

That is, unless you have a negative opinion/experience with a doll that someone else loves. Then your feelings are insane/unreasonable/hyperbolic lol.

Ha! I think I'm definitely seen as the more unreasonable one when in comes to InArt but that's fine.

 

[Sixth Scale Man]

Just got my invoice from Sugo for the standard/sculpted hair. Kinda hoping it would be after Xmas, but oh well. Looking forward to it though.

 

[HyperDrive]

While I agree with that, I also think the price that InArt are charging set themselves up as the premiere 1/6 figure company and therefore bring out that higher expectation among collectors, myself included.. What I've finding and am adjusting to for my opinion of them are that to me I'm not finding them that much better than HT if at all in some cases; so, I need to lower my expectations which I think helped in my overall impression with BvS Superman. Though, I do like their finer, more human paint apps at least for HP and BvS Sups headsculpts vs the sort of more blanket production paint apps HT tend to do for every human character.

Price they’re charging set themselves? So prices that are basically in the same ballpark and either slightly above or in line with Hot Toys pricing, right? Standard sculpted Aragorn was only $335 including tax and overseas shipping costs/fees/etc. That’s slightly more than a typical Hot Toys SCULPTED figure. Why expect more from INART when they’re not even that much more than Hot Toys? We can also compare comparable rooted standalone sets if you’d like and in some cases, DXAE releases are even more pricey than INART sets, respectively.

You can perceive them how you want all day long, but it’s a bit disingenuous imo, at how you/people make it seem, IMO. The price-to-value is much greater with INART than Hot Toys, IMO. But I get it, MMV and we all have different standards and opinions.

Thanks for asking about it! Sent you a PM with all the info/pics I have

Ha! I think I'm definitely seen as the more unreasonable one when in comes to InArt but that's fine.