1/6 MMS DX 02 - TDK- BATMAN full spec and pics

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

He knows it all...:naughty

I'll wait for the 4th or 15th batch to get another one. HT should just pump these out like Shawn Kemp's baby mommas.

By then, everything should be 'fixed.'




Zzzzzzzzzzzzz..... :pow
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

V!C, I think it is just a matter of time now......

Back to topic, I'm going to wait until BBTS gets them in, I don't like getting the HT figures off of ebay unless I absolutely have to.

Yes, stop with the racist PMs please. I guess black people can't come here and talk about collecting.

We love Batman too.

BTW, I just took off the belt for 24-hours, let it stand by itself, and the leaking slowed own substantially and I will not wipe away just to see how this tact with end up.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

I had a vision of a world without Batman's defects, the collectors complained and Hot Toys sent them replacements out one by one and it was so boring...
This thread needs some positivity.

Picture226.jpg


Best of pals:

Picture254.jpg


But things turn ugly:

Picture239.jpg


Picture246.jpg


I'm no Maulfan but I did my best. :D
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

I guess black people can't come here and talk about collecting.

We love Batman too.
.

no one really cares if you're black. ...you're just an _______.

why is it ok on this forum to write "ass" and "hole" but you cant put the two words together for the wonderful "_______" ??? wtf dave?
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

why is it ok on this forum to write "ass" and "hole" but you cant put the two words together for the wonderful "_______" ??? wtf dave?

Because the combination is derogatory but the word separate can have harmless meanings.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Thanks for that dcflake, we need to rein it in a bit on the oil issue I think.

Perhaps the thread that Geil started for the oil/ moisture poll could be the primary place for that discussion, and everything else here.


Just a thought.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

no one really cares if you're black.



Seriously V!C, why would anyone care? Do you think all the other collectors in this thread are white?



I imagine your just trolling again...
 
Last edited:
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

BTW, I just took off the belt for 24-hours, let it stand by itself, and the leaking slowed own substantially and I will not wipe away just to see how this tact with end up.

I have done the same thing and the leaking has slowed for me too.
Also, the oil that is on the surface seems to evaporate.
Perhaps wiping is the worse thing you can do, and leaving it alone is the best policy?
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Hey Wook, I know it hasnt been 24hrs yet, but how is it working out?

Well I checked last night, there was a minimal amount so I dabbed it away (I'm not using a wiping motion for any fear of being abrasive).
I'm gonna try leaving it be for with no belt on for a while after finishing my review to see if simple air drying helps.
But luckily mine seems pretty minimal, it it weren't for me looking for it I might not have noticed as its a very small amount directly behind the belt on mine.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

My share of the oil problem

With flash
4351518602_f95476b308_o.jpg


Without flash
4351518716_ce072bcfbf_o.jpg


Just two days after opening.......
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

That's a lot of oil on those plates, whew....it almost seems like it's getting worse with the newer releases. Mine was never that bad, and it's a first batch figure.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Guys, I finally got my DX Bats yesterday and I believe this is supposed to be the second batches. Suit is perfect with no peeling or imperfection whatsoever but oil residue is there on the abs right out of the box. Been cleaning it every few hours and I think it is going to be a while before this 'oil' thing dries up.

However my PERS head has the slight case of a longer right ear. It is actually quite noticeable and I think I should try to seek for a replacement from HT.

Anyone knows how I go about doing there? What is the email address for such a situation?

The sonar head is fine though and the sticky bomb gun is just a work of art.

I'm from Malaysia as well and collected my DX02 this afternoon.

Just to share:

a) Warping - from what I can tell, no warping on either of the heads, but its 11:35 pm now here and it's dark so I'll wait until daylight to re-examine it again

b) Peeling paint - so far I haven't noticed that yet, but I think I picked one that didn't have "perfect" painting. Some of the "detail" on the carbon fibre plates are missing

c) Oil on the abs - this thing was oily (bottom two abs plates) right out of the box. I also notice this oil on the round sticker that was used on the plastic around the belt. I've removed the belt and put it back in the box. Will wait until tomorrow to see if the oil reappears (which seems to be recurring).
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

That's a lot of oil on those plates, whew....it almost seems like it's getting worse with the newer releases. Mine was never that bad, and it's a first batch figure.

The best part....it is so oily, I could even see my reflection on it!
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Wow that sucks. Sorry you guys are dealing with this. Glad Im waiting and hoping for a oil free figure by then.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Wow that sucks. Sorry you guys are dealing with this. Glad Im waiting and hoping for a oil free figure by then.

That could be a long wait if HT doesn't acknowledge that there is a problem. It does seem to very from figure to figure.

Also, the solution may be to not wipe the oil off and let it leave the suit on its own. Most rubber items that I have had that have oil that "leaks" (such as parts for R/C airplanes and buttons on remotes) tend to stop after a period of time, usually only a few weeks or so. The rubbing/wiping may just exacerbate the situation.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

I emailed HT with a picture and the a description of the problem even going as far as telling them people have been having paint problems from all the rubbing on the suit (MaulFan).

We are very sorry to hear about that.
Concerning your oil problem in abs area, it may be caused by the circle sticker and plastic bag of the belt, please take apart it and you can slightly remove the residue by finger.
Please try and advise if still have problem, we will get back you soon!
Sorry for the inconvenience caused.
Best regards,
SA/ Hot Toys

Looks like thats the standard answer we get now. I really don't know what else to ask them they don't seem to care.:banghead

I just hope no paint comes off then I'll demmand a refund.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

I figured that the oil isn't going to disappear overnight, might as well have some fun with the "oil"

So here are some photos.
4351696306_e4e3dd6b55_o.jpg

4351696140_9e5edb6bc4_o.jpg
 
Back
Top