Jazzinc 1/6 Batman 1989 Batmobile
- Thread starter Rondesmo
- Start date
Help Support Collector Freaks Forum:
Cthulhu
すみません
Maybe I am wrong, but I actually haven't heard any of the reviewers point out or mention anything about any divots/dimples or whatever on the car in any of these posted videos. I would think if the "blemishes" were so blatantly apparent and visible that the reviewers would be pointing it out first and foremost.
That's a much more extreme example than most I've seen so far. Wonder if it somehow got exacerbated through shipping or by different temperatures?
I was hit for a customs fee on the 2022 Batmobile. It was @$55-60 as I recall. This is the same price so should be in the same range.
Man I can't get over how much better that front view looks on the Jazzinc version. Makes me wonder what I ever saw in the HT.
- Joined
- Oct 3, 2012
- Messages
- 1,328
- Reaction score
- 485
I'm kind of confused why anyone is even continuing to talk about the indentations. They arent changing so just take it to leave it.
It's a valid critique, since folks had expected a flawless design on the chassis - can't fault anyone for that. That's money spent on a very expensive product, where there were certain expectations.
But, since Joost had already stated in this thread that they're unable to fix it any more going forward, it wouldn't make sense to keep demanding that they do it. That's just beating the wind (as unfortunate as it is).
I'm going to go with the cheapest option for both of mine now. Last time I checked in August, the product page had expected shipping to the US at $250 (now $310) and that was assuming air freight like you said based on previous vehicles and because a cheaper option was never mentioned until recently. I was excited to hear about the possibility of a cheaper option but then disappointed to find out it meant the original expected cost was now for sea freight and that air freight would be ~$500.
So with the packaging being improved, I'm going with the cheapest option. I don't care at all to have it asap anymore. I'd rather save a few hundred dollars. Depending on how it turns out, that money saved can get me the dx Catwoman
IMBATMAN
Freaked Out
- Joined
- Jul 12, 2020
- Messages
- 140
- Reaction score
- 29
No they actually sent an email with a breakdown of the shipping options. Not sure if it is batch related but there is a $500 dollar option that ships it via air from the factory and it will arrive in approx 7 business days.
I take it that you’re in the first batch? I’m in the 2nd batch and I haven’t received an email yet. Does it say how long the sea shipment delivery will take? Hopefully not too long. When we ordered these there was no discussion of it coming from China and the shipping estimates were for air freight from The Netherlands. At least it sounds like Joost has made sure that the sea shipment prices from China won’t exceed his initial estimates, so I guess I’ll be going that route. I would have paid the $300-ish price for air freight, but there’s NFW I’m paying $500 (33% of the purchase price!) for that option - that’s ridiculous.
I’m assuming this (the cost increase to ship from China in lieu of The Netherlands) was at some point a topic of discussion in one of Joost’s videos or in his Facebook group, but as a paid in full, returning customer (5th order) it would have been nice to get a heads up via direct email rather than have to find out through the grapevine. At the very least the shipping estimates on the website should be updated to include the air & sea options.
freddykrueger
Freaked Out
- Joined
- Jul 7, 2013
- Messages
- 118
- Reaction score
- 79
I think we were all seduced by the fact hot toys produced the first Batmobile in 1/6 scale….
Musashi3290
Freaked Out
- Joined
- Apr 27, 2017
- Messages
- 210
- Reaction score
- 109
It's not really. It's not just criticism about the vehicle, it's the attacks against the company, Joost, content creators being in bed with the companies and various other conspiracy theories.
At the end of the day, people are praising how awesome the HT version is despite the flaws. They aren't attacking HT for being a corrupt company trying to steal your money, baiting and switching etc. Why can't those who want the Jazz Inc just have it, and those who want the HT have theirs too? Is it a contest?
No, it was only to illustrate my thought.
If you knew me better, you would know that I’ve always be indulgent with the HT version.
It’s a vehicle I’ve bought in 2013, always been one of my favorite item and still think it’s a great representation of the Batmobile with a lot of presence despite its flaws. Back to 2013, for 600 $ shipped it was an awesome deal.
I agree, not very fair to compare to a 1 500 $ item but same object, same scale, the comparison is inevitable…
- Joined
- Sep 1, 2013
- Messages
- 2,257
- Reaction score
- 1,272
Ok seriously, if you still want to address the ‘mold issues’, there are three options:
1) charge twice the price and take a dozen more hours of filling and sanding per vehicle. Add more layers primer, paint and finish and polish. Adding a few month to production. And have problems down the line with paint cracking
2) increase the price less (than twice the price) and make all separate parts for the side panel and accept bigger alignment or panel gap issues
3) hugely simplify the side mold in detail, curves and accuracy like hot toys chose to do.
Pick your poison. But people saying we were just being lazy or not paying attention kind of rubs me the wrong way. We have been working on this for almost 24 months with production and an incredible and unheard of amount of hand work going into these first batch pieces for almost 6 months. At a certain point there is a limit to what you can do. Especially since filler will always shrink a bit and increase the chances of paint cracking down the line. Also, with the semi gloss, black, you will see literally everything. With a certain light, you will always see any unevenness.
You cannot sand indefinitely because the wall thickness becomes too thin, combined with the heat from sanding creates its own kind of warping and waving in the material. There is just limited to what you can do on this budget.
To give you an idea of how much costs goes into this vehicle: I pay just one of my suppliers $855 per vehicle for his part of it only. So, imagine, adding all the suppliers, Warner Brothers costs, shipping cost, credit card costs, website costs. rent, overhead and then our salaries on top of that and you see how paper thin the margins are. Yet many armchair experts say this was an easy fix and an unnecessary thing to have happened that could’ve been easily prevented, and just shows callousness and laziness on our part.
I’ve said it before and I will say it again. If this is so easy, then why is no other 1/6 scale company making vehicles anymore?
Hot toys has not released an original design in over a decade. And, they make different choices in terms of complexity versus accuracy and size. There’s no such thing as a free lunch. That is the last I will say about this.
1) charge twice the price and take a dozen more hours of filling and sanding per vehicle. Add more layers primer, paint and finish and polish. Adding a few month to production. And have problems down the line with paint cracking
2) increase the price less (than twice the price) and make all separate parts for the side panel and accept bigger alignment or panel gap issues
3) hugely simplify the side mold in detail, curves and accuracy like hot toys chose to do.
Pick your poison. But people saying we were just being lazy or not paying attention kind of rubs me the wrong way. We have been working on this for almost 24 months with production and an incredible and unheard of amount of hand work going into these first batch pieces for almost 6 months. At a certain point there is a limit to what you can do. Especially since filler will always shrink a bit and increase the chances of paint cracking down the line. Also, with the semi gloss, black, you will see literally everything. With a certain light, you will always see any unevenness.
You cannot sand indefinitely because the wall thickness becomes too thin, combined with the heat from sanding creates its own kind of warping and waving in the material. There is just limited to what you can do on this budget.
To give you an idea of how much costs goes into this vehicle: I pay just one of my suppliers $855 per vehicle for his part of it only. So, imagine, adding all the suppliers, Warner Brothers costs, shipping cost, credit card costs, website costs. rent, overhead and then our salaries on top of that and you see how paper thin the margins are. Yet many armchair experts say this was an easy fix and an unnecessary thing to have happened that could’ve been easily prevented, and just shows callousness and laziness on our part.
I’ve said it before and I will say it again. If this is so easy, then why is no other 1/6 scale company making vehicles anymore?
Hot toys has not released an original design in over a decade. And, they make different choices in terms of complexity versus accuracy and size. There’s no such thing as a free lunch. That is the last I will say about this.
Last edited:
Well put. Thank you for the insights, Joost 
Questions about the shipping..
Can someone post the breakdown? I wanna know what to expect
And does the email say how long u have to pay off the shipping?
I have all the other jazzinc vehicles but this one seems to be different with shipping from what I’m reading
Edit: found the edit tab finally
Can someone post the breakdown? I wanna know what to expect
And does the email say how long u have to pay off the shipping?
I have all the other jazzinc vehicles but this one seems to be different with shipping from what I’m reading
Edit: found the edit tab finally
dondiegomasked
Freakzoid
Questions about the shipping..
Can someone post the breakdown? I wanna know what to expect
And does the email say how long u have to pay off the shipping?
I have all the other jazzinc vehicles but this one seems to be different with shipping from what I’m reading
Edit: found the edit tab finally
Jazzinc likes to wait until about two weeks before your order is scheduled to ship so that they can give you the most current shipping rates. Someone higher on the list could tell you what shipping options they’d been given but that wouldn’t necessarily apply to your order or anyone else’s farther down the list. The best you can hope for is to get a ballpark estimate.
Jazzinc expects shipping to be paid off asap. But you might want to ask them if you could send a bit in beforehand.
Z
I understand about the small indentations, the ones that don’t affect the overall shape to any real degree, but what about this one? If my car shows up with a dent as pictured, will you deem it fully replaceable? Or is this to be expected?
Similar threads
