Enterbay Game of Death 1/6 2010

[COSMOSTARX]

I don't know, the stains do kinda line up with the black stripe from the tracksuit. The extra RMX body I purchased from EB has similar stains around the shoulder area now, where there was no staining before.

The black strip material used in the suit isn't inked. My mother is a seamstress and I see those kinds of materials used. It's highly unlikely that Enterbay dyed them nor would it leak ink. So I'm inclined to believe otherwise. I wish Enterbay could give a statement on it.

I know GB is

But the Enterbay site is actually selling the body for $77, & that includes shipping

That's the cheapest option I think

Looks good, I'm down for saving $20 on it.

I actually like these bodies a lot, but there's not a whole lot of other head sculpts I could fit onto the body.

 

[Lawrence]

The black strip material used in the suit isn't inked. My mother is a seamstress and I see those kinds of materials used. It's highly unlikely that Enterbay dyed them nor would it leak ink. So I'm inclined to believe otherwise. I wish Enterbay could give a statement on it.

I don't know about the stains on your figure, but I don't see how else my RMX body is stained. To me it seems to be the black stripes on the tracksuit & the black socks.

I think staining is a common occurence on EB BL figures, if I'm not mistaken. The fact that EB has not fixed this issue after all their BL releases is a bit silly. Having to find different ways to keep a figure from staining (tin foil, washing ..... etc), is a bit of a hassle I think.

I have a question. Which EB Game head sculpt do you prefer? The BD one, or the smiley?

 

[COSMOSTARX]

I don't know about the stains on your figure, but I don't see how else my RMX body is stained. To me it seems to be the black stripes on the tracksuit & the black socks.

I think staining is a common occurence on EB BL figures, if I'm not mistaken. The fact that EB has not fixed this issue after all their BL releases is a bit silly. Having to find different ways to keep a figure from staining (tin foil, washing ..... etc), is a bit of a hassle I think.

I have a question. Which EB Game head sculpt do you prefer? The BD one, or the smiley?

I actually ended up liking the smiley face more. I have seen the HT Arnie smiley figures on display at a store up close. I like the EB sculpt more than the HT sculpt. The details won me over, hence why I had that head on for most of the pictures posted, hahaha.

My battle damaged head doesn't look defective, it doesn't look like it has lazy eye either. I was able to pose it fine and still make it look good IMO. The only thing lacking was it didn't have the bruised cheek look more apparent but the blood on the lip was fine. It's like, gimme both or none! I want a BD head sculpt with no bruising. Wasn't someone working on that too?

 

[Lawrence]

I also wanted a BD head sculpt with no BD

When you say your BD head sculpt doesn't have lazy eye, it makes it sound like you have the EVision still intact. Seeing as it would be easy to adjust on the newer eye system

 

[COSMOSTARX]

I also wanted a BD head sculpt with no BD

When you say your BD head sculpt doesn't have lazy eye, it makes it sound like you have the EVision still intact. Seeing as it would be easy to adjust on the newer eye system

I could try and pose a few. How was the EVision giving people problems before? Maybe I can test it out.

 

[Lawrence]

My EVision head came with crooked eyes. So I decided to send it back to EB. I have a spare BD head sculpt with the newer (which is actually the older system, same with previous EB BL figures) eye system though.

The EVision system has the "ball like thingy" on the inside of the head, which controls the direction of both eyes. The ones released later have the eye system, where you can individually adjust each eye. Which I think is better

 

[COSMOSTARX]

Oh, yeah mine has the two individual things.

I was thinking, weren't there problems with this and how do I know if this is messed up or not?

And then...... the stains.

 

[CloudN]

I don't know about the stains on your figure, but I don't see how else my RMX body is stained. To me it seems to be the black stripes on the tracksuit & the black socks.

I think staining is a common occurence on EB BL figures, if I'm not mistaken. The fact that EB has not fixed this issue after all their BL releases is a bit silly. Having to find different ways to keep a figure from staining (tin foil, washing ..... etc), is a bit of a hassle I think.

I have a question. Which EB Game head sculpt do you prefer? The BD one, or the smiley?

I like both head sculpts. You can use the BD head for some serious fighting pose and the smiley head for some more relaxed behind the scenes pose for fun.

I'm not sure which part of the fabric is the cause for the staining but I do recommend the "pre-wash" process as a peace of mind. I emailed Enterbay before and they did say they went through a pre-wash for the suits I'm not sure how they pre-washed the suits.

Also took some new pics today.


Flickr 上 yauyuso 的 P1040491

So far my Bruce has been wearing the suit for 2 days and he's fine so far. Haven't noticed any obvious stains. A lot of the stained bodies were due to they were suited up in the box since they were packed in the factory. The new batch and the individual RM-X body has a plastic wrap protecting the body. And EB listened to my comment that they should have installed the Bruce Lee figure topless so that people won't see a stained Bruce when they open their boxes.

 

[mrchris]

The black strip material used in the suit isn't inked. My mother is a seamstress and I see those kinds of materials used. It's highly unlikely that Enterbay dyed them nor would it leak ink. So I'm inclined to believe otherwise. I wish Enterbay could give a statement on it.

Looks good, I'm down for saving $20 on it.

I actually like these bodies a lot, but there's not a whole lot of other head sculpts I could fit onto the body.

i have the HT dx ETD-BD on my RM-X. also if your lucky enough to pull the neck peg out of either GOD sculpts mine pulled easy.you can use older EB BL heads to go on the body

 

[COSMOSTARX]

i have the HT dx ETD-BD on my RM-X. also if your lucky enough to pull the neck peg out of either GOD sculpts mine pulled easy.you can use older EB BL heads to go on the body

ETD BD head goes right on it fine? No modding required?

 

[mrchris]

ETD BD head goes right on it fine? No modding required?

SNAPS STRAIGHT ON..my friend

 

[Rogerbee]

FOF nunchuks

With the right hands that's doable.

 

[Rogerbee]

MrChris, last night and earlier today I was actually thinking about which pose would be nice to do as he in fact did do at least four really classic and cool poses with the Bamboo. I am very much looking forward to seeing your results - and I think you should do them all, take a few photos and show us !

Go for it mate

as per GungFu's request...yeh i got bored too
more classic mrchris pics
cant get the stick tap pose (not with a BL3.5 ANYWAY)

Nice, I could even do those poses with mine and not have to change hands. Perhaps I should get the stick as well, might save future boredom!

 

[Rogerbee]

THANKS GUYS
hows this GungFu

Ooh, another one I could maybe do!

 

[Rogerbee]

I like the RM-X body a lot. The RM4 body feels like total ass now.

How much of an improvement is the RM4.2 (Cha Guerrera) body?

The Che version is the Bourne version without the ankle extensions.

 

[Rogerbee]

COSMOSTARX:

Sorry to hear you had staining issues with your BL body. Guo Bei is a bit more stringent when it comes to what he sells. As I said before, my RM-X was from a box set and was immaculate.

When it comes to doing any washing of suits, I would absolutely NOT recommend doing it with the BD suit as you will lose the footprint and any additional weathering.

 

[mrchris]

https://www.ebay.co.uk/itm/enterbay...nFigures_ActionFigures_JN&hash=item43a9973254
i know your short of £s roger .even loose this is cheap.head goes for £60 and the outfit nearer £80..bargain i think

 

[Lawrence]

Oh, yeah mine has the two individual things.

I was thinking, weren't there problems with this and how do I know if this is messed up or not?

Sounds like you don't have the EVision eye system. The problem was with the EVision eye system. That was scrapped & replaced with the eye system you have now

I noticed you changed your avatar & sig. Somebody likes their Game figure

 

[Rogerbee]

https://www.ebay.co.uk/itm/enterbay...nFigures_ActionFigures_JN&hash=item43a9973254
i know your short of £s roger .even loose this is cheap.head goes for £60 and the outfit nearer £80..bargain i think

Nice, but, I've got an FOF figure, with an original head and a decent enough outfit, so I've no need for another.

 

[COSMOSTARX]

The Che version is the Bourne version without the ankle extensions.

Oh. Ew Kinda hate this EB body. I don't like how it sorta swings outward by itself a little bit when you try to press them inward.