Hot Toys - MMS 191 - Iron Man 3 - Tony Stark Specs & Pics

[SMC92]

Your lucky, never take him for granted, my cat passed away this time last year, had him 9 years he was always here pottering about watching 24 or something with me, trying to claw at Jack, thank god the tv was high up or it'd be ruined!! He did used to sleep on my keyboard using the screens as heat.


Sent from my iPad using Tapatalk

 

[Username]

Your lucky, never take him for granted, my cat passed away this time last year, had him 9 years he was always here pottering about watching 24 or something with me, trying to claw at Jack, thank god the tv was high up or it'd be ruined!! He did used to sleep on my keyboard using the screens as heat.


Sent from my iPad using Tapatalk

They occupy such a large place in our hearts, that it's heartbreaking when they leave us.
I'd never take him for granted.
When I have been away for even the whole day, I miss him. And he is curled up sleeping between my legs as I write.
I'll be devastated when he passes.
And I will have to get another cat right away.

 

[SMC92]

We had four but the one that passed was MY cat, he was always in her, I'd get a new figure or console and he'd be straight into the box, even paper bags from shopping... Now I get a big box in the mail, it just stays there empty only pet owners understand what it's like.


Sent from my iPad using Tapatalk

 

[Username]

We had four but the one that passed was MY cat, he was always in her, I'd get a new figure or console and he'd be straight into the box, even paper bags from shopping... Now I get a big box in the mail, it just stays there empty only pet owners understand what it's like.

I know. We lost out cat(Kitty. See pic below), in 2009, and she was close to 18 years old. She just had things wrong with her and it was time to go peacefully. With only a week in-between *without a cat*, we got news a stray cat had turned up in my Uncle and Aunt's street. A couple had taken him in, but they were willing to let us have him, and that was how we got Jasper. I went over with my cat carrier, placed it on the floor and Jasper just went over, went inside and sat down as though to say: "Where are we going?"

Kitty(Who once brought a dead rabbit back from the field next to the house, spent two hours eating everything except the hind quarters, then spent the next two days sleeping it off):

 

[Y4NK33 PL4N3T]

You guys should go watch 'Bane Cat' on Youtube

 

[Username]

You guys should go watch 'Bane Cat' on Youtube

That was very funny.
Thanks for mentioning it!

 

[Onaisan]

Lol. He's 1/1.


Me too.
The most amazing cat i have ever known.
And like all cats, he's an attention seeker.
You are setting up a perfect shot:

To get this angle:

And Bam...

Here he comes, all like: "Hey, watcha doing over here, over there?"

Hey Username, great pics, and would it be possible for you to give a how to (with pictures if possible) on how to make this red carpet thing, because it looks SOOO awesome and could you also please upload that background with The Avengers and Marvel logos please. I would greatly appreciate it.

 

[Username]

Hey Username, great pics, and would it be possible for you to give a how to (with pictures if possible) on how to make this red carpet thing, because it looks SOOO awesome and could you also please upload that background with The Avengers and Marvel logos please. I would greatly appreciate it.

Thanks for the interest.
I made the red carpet base from a sheet of MDF and some red material i purchased from a local place that sells cloth. I just picked a "red carpet" material. Rich, and bright red.
The brass uprights i made from brass tubing which i had filled with resin. When the resin had set, i chopped the tubing into equal lengths, and screwed in the brass bottoms, which i found in a local ironmongery store. When you buy brass handles for a kitchen cupboard, the sometimes have these parts as a decorative fitting between the handle and the cupboard door.
The corded rope was bought in the same store as the cloth.
The backdrop i made in photoshop and had printed out on vinyl by a local vinyl signmaking shop that normally makes large vinyl decals for the side of trucks or company signage. I got it sized at 914mm wide by 452mm high but, on reflection, i reckon it was too small. I have to go in close to not reveal the edges. If i got one done again, i would get it made bigger.
Here is the marvel backdrop image:

I also used that for the "Red Carpet" Avengers picture i did:

And some pics of the stage:

 

[BuGz]

Lol there great mate! The Coulson is my fav lol

Bri

 

[Username]

Lol there great mate! The Coulson is my fav lol

Bri

Thanks. I still have the thing on a shelf somewhere, lol.
I should take pics with all my figures.

 

[Onaisan]

Thanks for the interest.
I made the red carpet base from a sheet of MDF and some red material i purchased from a local place that sells cloth. I just picked a "red carpet" material. Rich, and bright red.
The brass uprights i made from brass tubing which i had filled with resin. When the resin had set, i chopped the tubing into equal lengths, and screwed in the brass bottoms, which i found in a local ironmongery store. When you buy brass handles for a kitchen cupboard, the sometimes have these parts as a decorative fitting between the handle and the cupboard door.
The corded rope was bought in the same store as the cloth.
The backdrop i made in photoshop and had printed out on vinyl by a local vinyl signmaking shop that normally makes large vinyl decals for the side of trucks or company signage. I got it sized at 914mm wide by 452mm high but, on reflection, i reckon it was too small. I have to go in close to not reveal the edges. If i got one done again, i would get it made bigger.
Here is the marvel backdrop image:

I also used that for the "Red Carpet" Avengers picture i did:

And some pics of the stage:

OH MY GOD THANK YOU SO MUCH!!!! You make the coolest freaking things I have ever seen man, great job!

 

[Username]

OH MY GOD THANK YOU SO MUCH!!!! You make the coolest freaking things I have ever seen man, great job!

Haha. Thanks!
I've made cooler stuff than that, lol.
But i am glad you enjoyed it.

 

[bransen2099]

Barry, omg that is nice. How much time did you put into that?

 

[Username]

Barry, omg that is nice. How much time did you put into that?

Thanks.
Maybe three hours of work into the display stand with the brass poles, and about £30 worth of materials.

 

[bransen2099]

Thanks.
Maybe three hours of work into the display stand with the brass poles, and about £30 worth of materials.

Ah well it didn't take that long, not to bad and it came out pretty spot on

 

[Username]

Ah well it didn't take that long, not to bad and it came out pretty spot on

Thanks. I was pretty happy with the result.

 

[Chiefrocka]

I know this been asked before but serching these pages I can't find it, but can anyone tell me if this set can fit completely on top of a detolf? Very limited on space and I would love to set this entire set.. Thanks

 

[Boba Debt]

The base is 20" in diameter so I doubt it

 

[Mudblood]

I really doubt it. Mine is displayed on a glass tv stand and I still couldn't fit the entire base.

That shouldn't stop you from getting it though. You could fit part of the base in like others have done. It's a fantastic figure.

 

[Chiefrocka]

^^^ thanks guys! I have it already just in the box for now until I figure out a good set up