1/6 MMS DX 02 - TDK- BATMAN full spec and pics

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

There is no comparison. I can't fathom how someone can prefer the DX02 suit, unless they just like the fat, awkward, rubbery, inaccurate look.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Okay, I'll revisit my opinion of the DXO2

DX02
The stand is better than the DX12
The faces are better than the DX12
It has the Sonar head and backpack


DX12
Has a much better suit
Has a better headsculpt
Has better gaunlets, accessories
2 Belts
Bruce Wayne Head
 
Last edited:
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Here is teh siuattion guys :

I am only been Collecting Hot Toys for 3 Weeks.

I have never even touched or handled a Batman yet :(

I only go from what I can see ?

& from the pics of members that I have seen so far , I like the DX02 ..

I just bought 1 Locally tonight, for very cheap from a friend & also a member on here , so I will have him by Friday this week.. If I dont like him, I will buy the DX12 & let him go, but from the pics my buddy has sent, he is looking pretty sweet, and with the Head Sculpt from Spore posted earlier, I think he will just look Dandy :)

and to Top it all off !

I just put an Order down for a DX11 Joker aswell, so they can talk to each other in their Display Cabinet :)

I appreciate all your feed back guys immensely & I will probably get a DX12 aswell, so all good , as I want the DX11 version of Joker aswell..

I am a Hog :lol

So, I am Selling most of my Steel book Collection , and replacing it with Lovely Hot Toy Figures :D

regs Daz
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Guys, he says he likes and wants the DX02! He's asking for help, so stop hassling him by trying to give him something he DOESN'T WANT!

To the OP: If you're considering between DX02 and MMS71, then DX02 is vastly superior.

Just make sure you get one from the DCDirect batch. This one has hard plastic abs and will not leak (unlike the soft abs of the first DX02 batches). Ask your seller to confirm the abs are hard plastic before buying.

Dude your figure is going to leak oil. :dunno

Sent from my LG-E739 using Tapatalk 2

Not if he gets one from the DCDirect release. You don't know what you're talking about. :dunno is right.

Okay, I'll revisit my opinion of the DXO2


DX12
Has a much better suit
Has a better headsculpt
Has better gaunlets, accessories
2 Belts
Bruce Wayne Head

DX02 also has two belts, not just DX12.

I believe the two Bat-headsculpts are identical between the two?

Most people believe the faceplates (for the Batman head) are superior on the DX02, as the DX12 faceplates have been widely panned.

Similarly, most people seem to favor the DX02 gauntlets over the DX12 gauntlets (and are in fact modifying the DX12 gauntlets).
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

DCD batches with hard abs can still leak.
 
Not if he gets one from the DCDirect release. You don't know what you're talking about. :dunno is right.

I know people who've had DCD figures and they still leaked. People on this very board have had it happen to them. Don't know how wide spread it is but it happens. Still no reason to be snide. Its amazing how you come off as a **** in every post.



Sent from my LG-E739 using Tapatalk 2
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Mine has not leaked to date. I have one from the DCD batch. I still like this figure. I have the DX12 as well. Best of both worlds.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Guys, he says he likes and wants the DX02! He's asking for help, so stop hassling him by trying to give him something he DOESN'T WANT!

To the OP: If you're considering between DX02 and MMS71, then DX02 is vastly superior.

Just make sure you get one from the DCDirect batch. This one has hard plastic abs and will not leak (unlike the soft abs of the first DX02 batches). Ask your seller to confirm the abs are hard plastic before buying.



Not if he gets one from the DCDirect release. You don't know what you're talking about. :dunno is right.



DX02 also has two belts, not just DX12.

I believe the two Bat-headsculpts are identical between the two?

Most people believe the faceplates (for the Batman head) are superior on the DX02, as the DX12 faceplates have been widely panned.

Similarly, most people seem to favor the DX02 gauntlets over the DX12 gauntlets (and are in fact modifying the DX12 gauntlets).

The DX02 and DX12 do have different heads. I forgot about the second belt with the DX02, although people do much prefer the DX12 belts. The gaunlets are far better on the DX12 and there's only a couple of mods for them, which make them even better
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Off topic I know, but how come ebay and the boards aren't flooded with MMS 71 for sale? What is everybody doing with theirs? I loved mine when I first had it, so cheap too compared to today's prices.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

@Top_Cat.. since you're starting on this hobby (like myself)... I recommend to you to check the Enterbay HD 1/4 Batman thread. See the in-hand pictures. I got this week the 1/4 EB Batman and it's near to perfect, and I love the scale. Believe me once you see the 1/4 figure next to the 1/6 figures, the 1/6 figure looks really bad, and out of proportion.

I'll probably go for 1/4 Batman figures now (if they look good, unlike the QS001 :slap)....
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

The DX02 and DX12 do have different heads.

What's different about the heads?

The gaunlets are far better on the DX12 and there's only a couple of mods for them, which make them even better

What's different about the gauntlets? I admit that I know much less about the DX12 than I do about the DX02, but my impression was that the DX02 were held as being better? If not, what's better about the DX12 gauntlets?

DCD batches with hard abs can still leak.

Not in the manner that the non-DCD batches did. Those were widespread and nearly universal. DCD ab leaks were an isolated case and, this far in, very likely to be caused by outside factors.

I know people who've had DCD figures and they still leaked. People on this very board have had it happen to them.

The number of DCD abs leaks are so minor as to be statistically insignificant. It's not at all the same situation (or cause) as the non-DCD leaks.

Don't know how wide spread it is but it happens.

Exactly. You DON'T know how widespread it is, but you decided to comment anyway and spread incorrect information, to a new collector, about a topic you are not very well informed about. That's irresponsible and not helpful.

If you HAD followed the DCD abs issue, as I have since it began, then you'd know that fear-mongering about leaky abs in the DCD batch has very little basis in fact.


Still no reason to be snide.

Like I said, what you did was irresponsible. It's one thing to be incorrect when in a discussion with other experienced collectors - but if you want to present yourself as an authority to an uninformed, new collector, then you better get your facts right. Don't be upset when people call you out on it.

Its amazing how you come off as a **** in every post.

You're cute. Do you ALWAYS resort to ad-hominem, personal attacks when someone calls you out for being wrong?

It's ok to admit when you're wrong. This isn't a ****-measuring contest.

Warden said:
Off topic I know, but how come ebay and the boards aren't flooded with MMS 71 for sale? What is everybody doing with theirs? I loved mine when I first had it, so cheap too compared to today's prices.

Most of those were sold off when DX02 was released. With so many different "TDK Suit" options, and with MMS71 being one of the poorest, oldest, and least-desired, you're not going to be seeing many of those in circulation anymore. They've already hit the bargain bins.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Haytil,,

Well said. Thank you.

not really dude. but whatever

531375_496757877008484_743441539_n.jpg


leaking aside this will eventually happen, it's cheap rubber. rubber dries out and rots. but again..whatever
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Btw this was my personal dx02 that was mib stored in a optimal environment. It is the DCD version. It started leaking a little over a year and a half after i had it. Not bad, but still leaking..

011.jpg


The guys that advised the Dx12 over the 02 were trying to help i believe. It is a much better built figure.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

not really dude. but whatever

531375_496757877008484_743441539_n.jpg


leaking aside this will eventually happen, it's cheap rubber. rubber dries out and rots. but again..whatever

How are you storing your figures? Who are you letting play with them? That looks atrocious.

Are you seriously claiming that this is typical of Hot Toys Batman figures?
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

I have three and all look great- no leaking- no issues at all....
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Vortex? i Don't think those abs are the DC batch?
The later releases (which don't leak) were a different shape slightly. Flatter and more angular, not as nice actually, but they at least they don't leak. Well mine haven't. I had both versions.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

How are you storing your figures? Who are you letting play with them? That looks atrocious.

Are you seriously claiming that this is typical of Hot Toys Batman figures?

That isn't my figure. I'm not claiming anything other than rubber eventually dries out,breaks down, and rots. The Dx02 is kind of a ticking time bomb, and that alone is why i would suggest the 12 over it, as opposed to which one actually looks better because that is subjective.

Vortex? i Don't think those abs are the DC batch?
The later releases (which don't leak) were a different shape slightly. Flatter and more angular, not as nice actually, but they at least they don't leak. Well mine haven't. I had both versions.

You are the second person who has questioned this. It had hard plastic abs and the plastic behind the belt rather than wrapped around it. It was purchased during the DCD batch release from BBTS. So i assumed it is the DCD batch.:dunno
 
Back
Top