1/6 Mal for Nathan Fillion Project

[MarfMaster]

I'm all for letting Marf weather and wire the coat.

I'd be happy to

 

[cadaver202]

I'm in for the gun rig for sure. Stevo says 4 weeks on the gun rig and I have a wide belt already. What body did you all decide on, TT narrow or TT standard. I can supply the body, I have both bodies on hand. Is Chad doing the clasps for the coat or do you want a set like I built for Marf? No problem, I have the material already. Where do we send this stuff? Is SS putting this whole thing together? Need an adddress.

Old Grandpa

I think we decided on a TT advanced. Wait and see what SS says.

 

[cadaver202]

Updated

The List
Head- Trev, painted by SS
Body- Old Grandpa (either standard TT or TT Adavanced)
Boots- Trev, Painted by SS
Pants-cadaver202
Shirt- cadaver202
Suspenders- cadaver202
Jacket- Chad, weathered/detailed by Marfmaster Clasps by Old Grandpa
Rig-Old Grandpa
Gloves-cadaver202
Base- Anzik/darthviper107

Let me know if there are any changes.

 

[cadaver202]

I'd be happy to

Added you to the list! Don't forget the bullet hole damage too. I have detailed pics if you need them.

 

[darthviper107]

D-Viper, that 3-D bridge is insane. I'd love to see that output in 1/6. If you did that, I'd have to build up all my Trevor heads into figures.

Everybody, thank you all so much for all the expertise, advice, and help with this. I knew this forum had the people with the resources for this project, but this is above and beyond my expectations. You guys are amazing.

Epic on 3.

1...2...3...

Epic!!!

I kind of wanted to, but considering how big that would be, it would be very expensive. I don't know anything about scratchbuilding, so I would have it sent to a 3D printer, and that's really expensive.

But I am thinking about making a 3 foot replica of the ship, which I would guess would be like $3,000 to have those parts printed. I've got a big thing coming up and if it goes well I'll be set for a while so I would totally do it then. And at that scale I've even figured out how to make the gravity wheel turn and have the reactor flaps open and close

 

[Anzik]

I'm doing small sections of the ship for each figure, although I wanna do a replica of the cargo hold and the dining room to pose everyone together.
Right now I just have the engine room corner.

Surfer, since this is going to be a display base and not an environment, I'm going to keep it one tone with no weathering to distract from the figure.

 

[darthviper107]

Here's another pic:

Still got a lot to finish, don't know when I'll get around to doing the rest of it, but it will be done someday

 

[Old Grandpa]

I'd be happy to

Marf, seeing as you are detailing Mals coat, do you want a set of my clasps?

Old Grandpa

 

[MarfMaster]

Marf, seeing as you are detailing Mals coat, do you want a set of my clasps?

Old Grandpa

Absolutely, the coat definitely needs them

 

[SilentSurfer]

I've already PMed Trev and volunteered to get the gun rig with the wide belt. If Chad is doing the coat do you still need the custom clasps?

Old Grandpa

I'll PM you with my shipping address. You might want to check directly with Chad if he wants you to send him clasps, or to MarfMaster maybe since he's adding finishing touches to the coat???

 

[SilentSurfer]

I think we decided on a TT advanced. Wait and see what SS says.

Yes, I think a TT advanced would be very nice.

 

[cadaver202]

Updated

The List
Head- Trev, painted by SS
Body- Old Grandpa (TT Adavanced)
Boots- Trev, Painted by SS
Pants-cadaver202
Shirt- cadaver202
Suspenders- cadaver202
Jacket- Chad, weathered/detailed by Marfmaster Clasps by Old Grandpa
Rig-Old Grandpa
Gloves-cadaver202
Base- Anzik/darthviper107

This is the list people!

I have an Advanced so I will make sure everything is fitted to that.

 

[SilentSurfer]

Based on this shot though, Narrow Truetype will do fine as well. His head's pretty large here.

Whichever shows up at my door is fine and long as it has the sculpted forearms.

 

[SilentSurfer]

Lets go ahead and cancel all clothes for this project and just make this version. It's the easiest.

 

[Old Grandpa]

Updated

The List
Head- Trev, painted by SS
Body- Old Grandpa (either standard TT or TT Adavanced)
Boots- Trev, Painted by SS
Pants-cadaver202
Shirt- cadaver202
Suspenders- cadaver202
Jacket- Chad, weathered/detailed by Marfmaster Clasps by Old Grandpa
Rig-Old Grandpa
Gloves-cadaver202
Base- Anzik/darthviper107

Let me know if there are any changes.

That list looks pretty darn complete. I'd say all systems are GO.

Old Grandpa

 

[Anzik]

I will swing by the hobby store tomorrow to pick up some sheets of heavy gauge styrene for the floor of the base. I'm assuming we will want a standard True Type support pole?

 

[Old Grandpa]

Based on this shot though, Narrow Truetype will do fine as well. His head's pretty large here.

Whichever shows up at my door is fine and long as it has the sculpted forearms.

I think there may be a mix up on the bodies. TTM16 is the advanced body with the sculpted arms and broad shoulders. TTM14 is the narrow shouldered body but non sculpted arms. Which one are we shooting for. I have a TTM14 on hand, but I can get a TTM16 if needed. The forearms will be covered with the shirt and coat, so do we need sculpted forearms?

Old Grandpa

 

[sithlordmacgyver]

What a crrrrrrazy couple of days...I am officially on board with the Mal Coat...Thanks everyone for the emails and interest. This is going to be an awesome collaboration!!!!!!

Marf...drop me an email so I can schedule that coat shipped out to you for your awesome weathering skills.

If you guys need anything else, let me know.

Thanks again for the opportunity to get in on this great project.

Chad
SMcG

 

[MarfMaster]

Email sent Chad

 

[SilentSurfer]

The forearms will be covered with the shirt and coat, so do we need sculpted forearms?

Old Grandpa

I was kinda hoping for the option to display it like this, but it won't be my figure, so it's not a total must. I'd like it though.