ScratchBuilder
Super Freak
Although it doesn't look like it in some of the images, it's defo oval and the same as the side intakes.
Must be some weird wizard like illusion
Jas
1/6 scale Landspeeder
- Thread starter ScratchBuilder
- Start date
Help Support Collector Freaks Forum:
Although it doesn't look like it in some of the images, it's defo oval and the same as the side intakes.
Must be some weird wizard like illusion
Jas
This comp pic shows just how awesome this is coming together.
The engines look SO spot-on.
I know the windscreen's being redone, but the one thing I'd say is that the very front of the vehicle seems to need to be a bit more "domed" or rounded - less straight/flat - and it seems like the underside of the body isn't as thick as the upper side (or maybe it slopes in at a sharper angle?,) which makes the 1/6 vehicle body seem slightly too tall or "fat" compared to the full size. Vertically, the full size vehicle body is so super skinny.
But I can't believe that someone has finally built an accurate 1/6 Landspeeder.
The engines look SO spot-on.
I know the windscreen's being redone, but the one thing I'd say is that the very front of the vehicle seems to need to be a bit more "domed" or rounded - less straight/flat - and it seems like the underside of the body isn't as thick as the upper side (or maybe it slopes in at a sharper angle?,) which makes the 1/6 vehicle body seem slightly too tall or "fat" compared to the full size. Vertically, the full size vehicle body is so super skinny.
But I can't believe that someone has finally built an accurate 1/6 Landspeeder.
Solo_bones
Super Freak
Flipping beautiful..
D.R.37
Super Freak
Awesome job Can’t wait to see this bad boy painted up!
Can’t wait to see this bad boy painted up!
WOW!!!! Amazing Work!!!
Chakaman
Super Freak
Fantastic stuff!! Wow.
- Joined
- Apr 25, 2015
- Messages
- 15,177
- Reaction score
- 4,144
Hey Jas, just out of interest what are the dimensions LxBxH looking like at this point ?
I think you estimated about 600mm long earlier.
ScratchBuilder
Super Freak
The new dash has been fitted, and I'm far happier with the new look.
Will try and get a more rounded nose and a few other small details this weekend, then it's the tricky casting bit.
Jas
Will try and get a more rounded nose and a few other small details this weekend, then it's the tricky casting bit.
Jas
- Joined
- Apr 25, 2015
- Messages
- 15,177
- Reaction score
- 4,144
That looks great !!
Yes, if you can get a more rounded nose that would be a huge huge improvement on the front end look !!
Not sure if it's possible in the way your doing it. But adding some material to bulge the front bumper area out between the grills might help make it look rounded and get the grill "deeper" without doing anything to the grill itself.
P.S If you remember, could you please also take those basic dimensions.
Yeah that would work nicely.
And that vertical thickness of the body area below the grill (where the bottom of the model seems a bit thicker than the bottom of the full size vehicle) might be able to be downplayed with a shadow color painting if it's too difficult to sand down the whole base of the piece.
I'm amazed at the eye for detail in this piece - how even the vertical struts (barely visible) behind the grill are correctly placed, and the number of grill strips is correct.
Pixelpiper
Super Freak
What parts of the current design are still open for change/refinement? It's a great work of both art and engineering without question, but IMO, it can still use a lot of changes to element sizes/proportions from an accuracy perspective.
I'm happy to try and make some time to highlight a few areas if there's still the possibility of tweaking, especially since I'm very interested in this piece.
I'm happy to try and make some time to highlight a few areas if there's still the possibility of tweaking, especially since I'm very interested in this piece.
- Joined
- Apr 25, 2015
- Messages
- 15,177
- Reaction score
- 4,144
Had to repost this awesome photo. Perhaps not quite the latest level, but a great angle I think.
If it is roughly 600mm long, I guess it will be about 300mm wide. Hopefully a bit less, if I am to fit it in the place I am planning.
If it is roughly 600mm long, I guess it will be about 300mm wide. Hopefully a bit less, if I am to fit it in the place I am planning.
Brundledonk
Super Freak
- Joined
- Sep 2, 2015
- Messages
- 423
- Reaction score
- 1
I too think the nose wants to be a little rounder ( going from the reference pic ) but I'm also wondering if the angle of the picture is making the body look thicker than it is, Jay could you take a pic of it level and horizontal and if you can one at the same angle as in the pic with Luke sitting in it ?
If you look at the line of bodywork above and below the grills it looks pretty close to the pic to me and that thickness will be the same as it goes around the nose so sanding a bit more of a profile around that area may be all it needs but a flat side on pic of the model will show for sure
The line below the grill on the actual prop has a lighter area at the top and darker at the bottom and that's making it look thinner than it really is to my eye, I think it's just shadow but when I start getting some paint on I'll be able to see if the model casts a shadow there or not and if it looks odd without it I'll be able to paint it in anyway
Pete
If you look at the line of bodywork above and below the grills it looks pretty close to the pic to me and that thickness will be the same as it goes around the nose so sanding a bit more of a profile around that area may be all it needs but a flat side on pic of the model will show for sure
The line below the grill on the actual prop has a lighter area at the top and darker at the bottom and that's making it look thinner than it really is to my eye, I think it's just shadow but when I start getting some paint on I'll be able to see if the model casts a shadow there or not and if it looks odd without it I'll be able to paint it in anyway
Pete
Yeah, this is a pretty important project. This may be the only opportunity to get a 1/6 landspeeder for the next decade or more. It's easily close to 90% screen accurate currently and there's not a huge amount of work to take it the final step.
A couple of top/plan and elevation pics (front, back and side) would be great to clearly see what the issue is, if it exists, as well as to spot any other issues.
ScratchBuilder
Super Freak
Hi all
Unfortunately I've been laid up with a bout of Man flu this weekend
so not ventured into the J-cave at all (possibly the only drawback from working in a Hospital with loads of poorly people)
As you know I'm always happy to listen & consider making alterations where needed.
I will definitely be making the nose more rounded.
Happy to review any critique preferably via email with pics as I have better visibility of my emails.
Jas
Unfortunately I've been laid up with a bout of Man flu this weekend
so not ventured into the J-cave at all (possibly the only drawback from working in a Hospital with loads of poorly people)
As you know I'm always happy to listen & consider making alterations where needed.
I will definitely be making the nose more rounded.
Happy to review any critique preferably via email with pics as I have better visibility of my emails.
Jas
Solo_bones
Super Freak
Hi all
Unfortunately I've been laid up with a bout of Man flu this weekend
so not ventured into the J-cave at all (possibly the only drawback from working in a Hospital with loads of poorly people)
As you know I'm always happy to listen & consider making alterations where needed.
I will definitely be making the nose more rounded.
Happy to review any critique preferably via email with pics as I have better visibility of my emails.
Jas
So awesome to be open to suggestions. You’re doing fantastic work here amd I feel embarrassed to make a suggestion, but...
The are above the grill on the sides where likes arm lays is concave...on the model it’s a sharp rounded edge like the nose. If you could sand down the area above the grill on the side I think that would look awesome!!!
Similar threads
