1/6 Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

[darth toffeeman]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

The extra Anakin purchases thanks to this release show how much we need Baze to go for pre order.

Chirrut is lost without him and as much as I love the figure it is incomplete imo.

 

[IronPatriotFTW]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

I hope they start pumping out clones, starting with Cody with a hologram hand.

My Rex recently sold and I really loved/miss him. I probably should have kept it to go with Kenobi and Anakin lol. But I’ve started collecting Marvel figures on top of Star Wars and he was just sitting around in storage for awhile.

If they pump out stormtroopers, they can do various clone.

Do Hot Toys have any allowances with Clone Wars or Rebels? Sideshow has let me down with those series and would like quite a few characters from those lines.

 

[Star-Crunch]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

Keep pre-ordering people! We need to show HT what we really want

 

[tjdavis1138]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

I’ll probably end up getting this but I’m holding off on Anakin until we get a “mustufar duel” or whatever they decide to call it.

 

[Tinman2000]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

Gonna order the standard version this weekend...I'm not an accessory guy; the table and serving accessories that came with the SSC R2 will never see the light of day.

 

[BlackWidow89]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

I pre-ordered through BBTS. Really hope that they do Padme at some point.

 

[Platty]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

Ep.1 obi is massively over looked in general, I hope hot toys don’t take the Same approach. It’s my favourite version of obi. He sums up my childhood. I can honestly see hot toys making jinn and maul But not obi.

 

[kazar123]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

I hope they start pumping out clones, starting with Cody with a hologram hand.

My Rex recently sold and I really loved/miss him. I probably should have kept it to go with Kenobi and Anakin lol. But I’ve started collecting Marvel figures on top of Star Wars and he was just sitting around in storage for awhile.

If they pump out stormtroopers, they can do various clone.

Do Hot Toys have any allowances with Clone Wars or Rebels? Sideshow has let me down with those series and would like quite a few characters from those lines.

I can see them doing Cody but otherwise they are probably just going to do generic clones if they are going to do them. I doubt they would do anything from Clone Wars. They are primarily focused on movie accurate figures and Rex aint in the movies.

 

[Oddacon]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

Well I just couldn't help myself. Preordered the delude. I wasn't intending to get any SW Hottoys but this looks to damn awesome.

I was vaguely interested in Anakin but even more so because of this. However, that ship might have sailed as Anakin is now waitlisted.

The only other SW 1/6 I have is the SS Phase 2 Captain Rex which I love and would go perfect with these two.


Sent from my iPhone using Tapatalk

 

[surforia]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

Preordered the deluxe.

 

[Dagashi Something]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

So this turned out to be more popular than Anakin himself, I'm not surprised. I wonder if they'll make more I'd love to have the clone armor version

 

[loki2371]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

So this turned out to be more popular than Anakin himself, I'm not surprised. I wonder if they'll make more I'd love to have the clone armor version

I doubt they will as they don't have the license for the animated CW. I'm sure they'd have interest to but, with all the OT stuff not produced yet, just getting into the PT, and the ongoing ST & future Disney stuff there's no way they could probably fit another license/SW line into the mix. Would be great though.

 

[Popnfresh98]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

So this turned out to be more popular than Anakin himself, I'm not surprised. I wonder if they'll make more I'd love to have the clone armor version

Anakin actually sold out faster at BBTS though. But there are 2 versions of this fella however

Still, I’m sure the clamor for these and even Tarkin selling relatively quick will get HT to realize what people really want.

 

[IronPatriotFTW]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

I can see them doing Cody but otherwise they are probably just going to do generic clones if they are going to do them. I doubt they would do anything from Clone Wars. They are primarily focused on movie accurate figures and Rex aint in the movies.

Rex is in the movies lol. #Spoilers

 

[IronPatriotFTW]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

Also if they can make some China plate trooper, they could be bothered to make different captains and commander clones. Although unlikely sure, I can always hope.

Sideshow, for whatever reason gives zero ****s about Ahsoka, Hot Toys could make some bank I imagine if they would do her.

 

[Cagoda]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

Also if they can make some China plate trooper, they could be bothered to make different captains and commander clones. Although unlikely sure, I can always hope.

Sideshow, for whatever reason gives zero ****s about Ahsoka, Hot Toys could make some bank I imagine if they would do her.

Agreed. But I do feel like in order for HT to do Ashoka, she’d have to be portrayed in some form of live action. I just don’t see HT doing figures from TCW or Rebels, unless it’s a live action show like they did with Netflix’s Daredevil.

 

[BadMuthaDude]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

I ordered the deluxe. Funny, I didn’t order the deluxe Emperor with his iconic chair, but offer me a baby Luke and hologram and I’m all over it. I just know I’ll never pose my figures sitting so a chair has less use than some extra accessories.

 

[Xeno Junkie]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

I ordered the deluxe. Funny, I didn’t order the deluxe Emperor with his iconic chair, but offer me a baby Luke and hologram and I’m all over it. I just know I’ll never pose my figures sitting so a chair has less use than some extra accessories.

See, now what are you gonna do if you wanna pose Grandpa Palpy with little Luke in his lap being rocked to sleep? I hear he’s a good story teller...

“Baby Luke, did I ever tell you the story of Darth Plagueis the wise...?”

 

[BadMuthaDude]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

See, now what are you gonna do if you wanna pose Grandpa Palpy with little Luke in his lap being rocked to sleep? I hear he’s a good story teller...

“Baby Luke, did I ever tell you the story of Darth Plagueis the wise...?”

Lol, I have a feeling there’s going to be a lot of weird pics with baby Luke. How about TFA Luke with his hand on the shoulder of Jedi Luke, who sits in front holding baby Luke.

 

[kazar123]

Re: Hot Toys - MMS477 / MMS478 - Star Wars Episode III: Obi-Wan Kenobi (Std & Dlx)

Rex is in the movies lol. #Spoilers

He isn't though. Unless you count the clone wars movie. Which I don't.