HOT TOYS QS 1/4 Darth Vader (pic courtesy Seanxlong)
- Thread starter bambooluv
- Start date
Help Support Collector Freaks Forum:
Comparison between the screen used reveal mask and HT...there's lots to love
Lord Valefor
Super Freak
thanks. I can see inaccuracies in R1 (same as ANH sculpt)but but they don't specifically jump out. The mask seems a bit small for the dome, the eye shape a bit off but less than ESB 1:6., the neck is too thin and dome flare is not right. The Quater scale has different problem (apart from the small nose area, what's with the huge lower mouth grill , I know it should be bigger than ANH but it should be more like the IS)
I'm not sure I would trade my R1 for another figure that has inaccuracies. I'll wait for the next sculpt. I have a feeling Disney might be the ones to issue a perfect one eventually
oh why not add the ESB 1:6 to that set, so we can confirm it's the worst one
At last, mine arrived.
I did QC checks. Tusks are in place, all the lights are working, belt box on-off levels are not broken.
But, I have encountered some issues which I want to know if they are worth bothering.
1-On-off level on left belt box does not go to the end. Its on position is right at the end where it should be. But when I want to turn it off, it doesn't go further than midpoint. Does this position turn it off? Yes. So, it functions properly, but behaves faulty.
2-This is related to me, not the figure. I removed the chest box cover but I can't push it back to the end. One of the pegs does not go to the end how much I push. When it enters, another one pulls out as the underplate is curved, but it's not. Did it happen to you?
3-This is very minor I think. The HS stand's base came out a little bit loosened. I didn't put it apart to see what's the problem. Instead, I applied pressure to connect them. It is fine now. Is this a big fault?
4-About the joints. This is my first figure with ratcheted joints, so don't have experience with them. Most of the joints behave the same (they move with little force, but you feel the racheting, not making any hard sound) which I consider as normal. Now, right shoulder forward movement makes very clunky noises and stiff. I'm worried of breaking it. Will it be loosened by the time? And outward movement on the left shoulder is very soft. Compared to right one, it skips 1st ratchet and settles on 2nd. When closing however, it can settle on 1st ratchet. Are these joint issues important to contact SSC?
I did QC checks. Tusks are in place, all the lights are working, belt box on-off levels are not broken.
But, I have encountered some issues which I want to know if they are worth bothering.
1-On-off level on left belt box does not go to the end. Its on position is right at the end where it should be. But when I want to turn it off, it doesn't go further than midpoint. Does this position turn it off? Yes. So, it functions properly, but behaves faulty.
2-This is related to me, not the figure. I removed the chest box cover but I can't push it back to the end. One of the pegs does not go to the end how much I push. When it enters, another one pulls out as the underplate is curved, but it's not. Did it happen to you?
3-This is very minor I think. The HS stand's base came out a little bit loosened. I didn't put it apart to see what's the problem. Instead, I applied pressure to connect them. It is fine now. Is this a big fault?
4-About the joints. This is my first figure with ratcheted joints, so don't have experience with them. Most of the joints behave the same (they move with little force, but you feel the racheting, not making any hard sound) which I consider as normal. Now, right shoulder forward movement makes very clunky noises and stiff. I'm worried of breaking it. Will it be loosened by the time? And outward movement on the left shoulder is very soft. Compared to right one, it skips 1st ratchet and settles on 2nd. When closing however, it can settle on 1st ratchet. Are these joint issues important to contact SSC?
I can answer #3 for you. Each base part is loose and wobbly. If the use just the lower base, the pole is loose and you'll need to wrap tape are the bottom of the pole before inserting it. If you use the upper base in conjunction with the lower base, it just wobbles and I'm not sure if there really is a fix for that. Right now I'm using both bases and Vader stands there without any issues. If you start to futz with him in anyway while he is on the base, it will wobbly a little and just make sure you have a hold of him so he doesn't fall over.
I know that. But what I meant wasn't it. You know the head display base. The part head/helmet sits is wobbly, right. But it's not the part I mention. These bases are made of two pieces which are joined by little extensions. That part was loosened. Maybe they should have been glued, not sure.
Sorry, I miss understood then. I didn't get the exclusive version so I have no clue on the helmet stand but I'm sure it was just as poorly made as the big stands were. Great idea, just poorly executed.
No, I've not had any issues with the joints or anything else other than the stands. I haven't put the batteries in so I've not had any issues with the belt boxes breaking.
Nice set up! Can we see the rest of the collection?
ST1138
Super Freak
- Joined
- Mar 1, 2009
- Messages
- 524
- Reaction score
- 29
Here is my first picture to add to the thread. I got mine for Christmas (at least part of it) so I just opened him yesterday and had to clear some space in my detolfs.
My initial thought is that this piece has a lot of presence and is different than any other Vader I have (which includes the Hot Toys Vaders except the Rogue One version, the Iron Studios 1/4 statue, and the 2nd SS 1/6 figure). This really is a stunning piece to add to the collection. I still need to try a few poses to see where to settle him, but this is my first attempt.
Sent from my iPhone using Tapatalk
My initial thought is that this piece has a lot of presence and is different than any other Vader I have (which includes the Hot Toys Vaders except the Rogue One version, the Iron Studios 1/4 statue, and the 2nd SS 1/6 figure). This really is a stunning piece to add to the collection. I still need to try a few poses to see where to settle him, but this is my first attempt.
Sent from my iPhone using Tapatalk
ST1138
Super Freak
- Joined
- Mar 1, 2009
- Messages
- 524
- Reaction score
- 29
loki2371
Super Freak
Here is my first picture to add to the thread. I got mine for Christmas (at least part of it) so I just opened him yesterday and had to clear some space in my detolfs.
This really is a stunning piece to add to the collection. I still need to try a few poses to see where to settle him, but this is my first attempt.
Sent from my iPhone using Tapatalk
Very nice set up.
I got mine over 2 weeks ago. I still have not fully opened him up. I only did a quick check to make sure his tusks were ok, but still need to check other QC areas like the stands and belt boxes. My problem is I have nowhere to put him, unless I put some other stuff away. And I know if I take him out to give him a good going over, I'll never be able to pack him back up the same (his face/helmet to protect the tusks). And I won't want to put him away....
The problems of being a collector and buying stuff I have no room for...
Star Wars...figure of the decade...
Similar threads
