Jazzinc 1/6 Batman 1989 Batmobile

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Funny thing is, about 10 years ago when I got my Hot Toys '89 Batmobile, the first really impulsive thought I had was to spray paint it to give it some kind of illusion of finish that was better than the awful model kit kind of raw plastic they left it with. I didn't, and chickened out of the task, because that's not my area of expertise, but that lack of paint was always a sore spot. The car looks good from a distance, but not up close and certainly not to the touch.

In 2022 my concern with Jazzinc's '66 Batmobile was how they could achieve the paint job, because it's such an important part of that Batmobile and not an easy thing to get right for a car at this large scale. They had some trouble and inconsistency, but for the most part achieved it. Maybe 75-80% success with overall paint applications and varying degrees of success with each and every car that left their floor. I suppose this '89 Batmobile is no different when it comes to paint finish and the overall look of the exterior - it has to look like the finish of a real car, not a plastic toy, and that involves creating an illusion with paint. It's perfectly reasonable that a poor or even mediocre paint job that falls slightly short or shows artifacts could be a real deal breaker for some collectors.
The Hot Toys Batmobile is painted.
 
From FB:

IMG_6110.jpeg

IMG_6109.jpeg

IMG_6111.jpeg
 
This Batmobile is a very impressive fan creation project, but certainly an expensive one. After having in hand for almost a full day and admiring its design and construction, I can honestly say its pretty good but not great. Mostly because of the paint inconsistency on my particular Batmobile.

Here are a couple of pictures to hopefully illustrate what I am talking about:
View attachment 735815
View attachment 735814

Not sure if my old phone camera can capture the level of visual fidelity that will properly convey the orange peel texture correctly as I see and feel it in hand, but its mainly noticeable near the rear-end of the vehicle especially around the both rear fender sides.

The car's exhaust cowling cover I used to contrast the difference in texture here. The cover has a smooth, even layer. Maybe this isn't considered super severe, but its definitely noticeable, more so than any molding indentations.


hey question for you...
you mentioned in a follow up post that you were not happy with the response from jazzinc to your paint issues...
what exactly were you told? never saw any follow up to that. thanks!
 
hey question for you...
you mentioned in a follow up post that you were not happy with the response from jazzinc to your paint issues...
what exactly were you told? never saw any follow up to that. thanks!
They said that the variation in paint texture looks to be within specifications and to use some jescar correction compound to make it have a shinier finish.



I honestly wasn't expecting much of any solution, and I'm not looking to further exacerbate any contentious debate regarding it. Mine unfortunately was painted kinda bad, it is what it is.

Only thing I would want is for them to fix the paint job for me, but it shouldn't cost me anything to do it. So I'm guessing it's an unrealistic delusion on my part.
 
Last edited:
They said that the variation in paint texture looks to be within specifications and to use some jescar correction compound to make it have a shinier finish.

That's what the 89 Batman figure is currently doing in the photo just a few posts above. 🤣
 
This Batmobile is a very impressive fan creation project, but certainly an expensive one. After having in hand for almost a full day and admiring its design and construction, I can honestly say its pretty good but not great. Mostly because of the paint inconsistency on my particular Batmobile.

Here are a couple of pictures to hopefully illustrate what I am talking about:
View attachment 735815
View attachment 735814

Not sure if my old phone camera can capture the level of visual fidelity that will properly convey the orange peel texture correctly as I see and feel it in hand, but its mainly noticeable near the rear-end of the vehicle especially around the both rear fender sides.

The car's exhaust cowling cover I used to contrast the difference in texture here. The cover has a smooth, even layer. Maybe this isn't considered super severe, but its definitely noticeable, more so than any molding indentations.
In my opinion, that paint is a QC issue.
That is likely the result of a painting in a hot environment and the droplets drying before reaching the surface. It can be polished out, but at the factory, not after delivery. Very poor.

JazzInc have always suffered with in-consistent paintwork. I was hoping this project would be the best yet, but it's not looking good.
Mine will be on the way, at the end of the year.
 
Just got my "Shipping ahead of schedule" email from Jazzinc right now, so I immediately paid my remaining balance😀. Ship date was January. Hopefully it'll arrive before Xmas now.

Now, what to do with my Hot Toys Batmobile🤔
Hopefully everyone gets their Batmobiles before a certain someone attempts to impose his 60% tariff on goods imported from China. :horror
 
They said that the variation in paint texture looks to be within specifications and to use some jescar correction compound to make it have a shinier finish.



I honestly wasn't expecting much of any solution, and I'm not looking to further exacerbate any contentious debate regarding it. Mine unfortunately was painted kinda bad, it is what it is.

Only thing I would want is for them to fix the paint job for me, but it shouldn't cost me anything to do it. So I'm guessing it's an unrealistic delusion on my part.


thank you for the follow up!
yeah that's unfortunate that they consider what was shown in the video as being acceptable. don't see how in any mind that gloss going to heavily distorted is not seen as a defect or poor processes... and advising you to use correction compound and fix the paint issues yourself is also beyond crazy to me as well?

keep going back and forth on whether to keep my order. i had this idea set for a nice 89 display. i've got the pure arts cowl i picked up, got the jazzinc batwing still new in the box and was waiting for the batmobile to start setting up my idea... went so far as to pick up the hot toys version this weekend as a place holder / replacement if i decide that i can't live with the things that are negative in my eyes on this model. i get the whole debate and trying to decide the lesser of 2 evils... not as screen acurate vs. paint and body issues. both sides of the group are right in their opinions and the right to discuss it.

i guess the investigation that needs figured out is how hard is it repair this with the issues as you've shown in the paint. i know the warping of surfaces is guaranteed and nothing is being done on that front, but correcting the paint is an art form from what i've seen and not sure how we would go about it by hand w/o machines?
 
Well, hopefully the bad paint is just a small isolated batch or only afflicting a few cars. Certainly sucks that I got one like this. I don't agree with their response to me that this is to specification, it is evident that it is bad and I'm just showing you one side of the car. It's just as bad on the passenger side, same area.

From what I've read online for fixing automobile paint, polishing with a compound and cutting pad and circular buffer will resolve this orange peel texture. Otherwise it is super fine grit wet sanding and reapplying paint/clear coat. I shouldn't have to do either.
 
Well, hopefully the bad paint is just a small isolated batch or only afflicting a few cars. Certainly sucks that I got one like this. I don't agree with their response to me that this is to specification, it is evident that it is bad and I'm just showing you one side of the car. It's just as bad on the passenger side, same area.

From what I've read online for fixing automobile paint, polishing with a compound and cutting pad and circular buffer will resolve this orange peel texture. Otherwise it is super fine grit wet sanding and reapplying paint/clear coat. I shouldn't have to do either.

I'm reading orange peel can only be fixed by sanding the paint flat and then compounding the paint to remove sand marks and then polish. This definitely should have been the production painters' job. Guess you could try the less abrasive method first and see if that does anything to help before using the sand method. I'd be pretty nervous sanding this Batmobile myself and accidentally over-sanding.

 
thank you for the follow up!
yeah that's unfortunate that they consider what was shown in the video as being acceptable. don't see how in any mind that gloss going to heavily distorted is not seen as a defect or poor processes... and advising you to use correction compound and fix the paint issues yourself is also beyond crazy to me as well?

keep going back and forth on whether to keep my order. i had this idea set for a nice 89 display. i've got the pure arts cowl i picked up, got the jazzinc batwing still new in the box and was waiting for the batmobile to start setting up my idea... went so far as to pick up the hot toys version this weekend as a place holder / replacement if i decide that i can't live with the things that are negative in my eyes on this model. i get the whole debate and trying to decide the lesser of 2 evils... not as screen acurate vs. paint and body issues. both sides of the group are right in their opinions and the right to discuss it.

i guess the investigation that needs figured out is how hard is it repair this with the issues as you've shown in the paint. i know the warping of surfaces is guaranteed and nothing is being done on that front, but correcting the paint is an art form from what i've seen and not sure how we would go about it by hand w/o machines?
I also have the Pure Arts 89 cowl and it's fantastic. If you pass on the Jazz Batmobile, another companion piece worth your consideration is the Paragon FX grappling gun made from aluminum. It's a fun tangible experience and you really feel like Batman when you pick it up and handle it. :LOL: They also make the glass smoke capsules, which I also own and are excellent. Those two together would be about a grand so still less than the Jazz Batmobile. And if you wait for a Black Friday sale, I'm sure you could get them for even less.
 
I'm reading orange peel can only be fixed by sanding the paint flat and then compounding the paint to remove sand marks and then polish. This definitely should have been the production painters' job. Guess you could try the less abrasive method first and see if that does anything to help before using the sand method. I'd be pretty nervous sanding this Batmobile myself and accidentally over-sanding.


I wasn't planning on watching this whole video but it's oddly satisfying! :LOL:
 
Back
Top