1/4 Scale Super Alloy Iron Man 3 Figures from Play Imaginative

[mikericm]

Cmon guys which is the best? I like them all, cannot decide.

Heartbreaker is my favorite of the lot. It has the iconic colors, but comes with its own uniqueness.

 

[skullboy]

Heartbreaker is my favorite of the lot. It has the iconic colors, but comes with its own uniqueness.

Yeah looks great, I agree mate.
Think its this one though I'm not 100% certain, will probably change my mind again.

 

[JD18_92]

These are awesome!! Waiting patiently for the legacy maquette but I got my eye on 3 of these for PO

 

[Theokan]

The real money is on Mark 1 to 7 IMO. The proportions are so good on these that I'd easily sell my Legacy Mark VI Maquette for a Mark III or Mark VI diecast, probably save me some money too.

Hopefully they would consider revisiting older armors once they finish with the IM3 droids.

 

[skullboy]

These are awesome!! Waiting patiently for the legacy maquette but I got my eye on 3 of these for PO

3!!! I'm so jealous

 

[LittleBahamut]

The real money is on Mark 1 to 7 IMO. The proportions are so good on these that I'd easily sell my Legacy Mark VI Maquette for a Mark III or Mark VI diecast, probably save me some money too.

Hopefully they would consider revisiting older armors once they finish with the IM3 droids.

I am imagining a 1/4 Hall of Armor filled with Mk 1-7...Then how much it will cost to purchase all the 7 and then either custom make the HOA or buy it if PA ever makes it. I would want the Mk VII the most if Play ever gets the license to do it.

 

[mikericm]

Yeah looks great, I agree mate.
Think its this one though I'm not 100% certain, will probably change my mind again.

Give us a review if and when you get it. I'm dying to know what these are like in hand.

I'm strongly considering putting out the money for a 1/6 RAW Mark VII. I love the way that looks unpainted!!

 

[LittleBahamut]

Give us a review if and when you get it. I'm dying to know what these are like in hand.

I'm strongly considering putting out the money for a 1/6 RAW Mark VII. I love the way that looks unpainted!!

I am thinking about putting my money on the painted Mark VII, but at this point a little scared because this company is new to me. That alloy Batman looks lackluster to me, but I haven't heard any issue with it so far. If I lose my patience in this thread about the quality of Play Imaginative, I may have to take the bullet and review it myself.

 

[skullboy]

Give us a review if and when you get it. I'm dying to know what these are like in hand.

I'm strongly considering putting out the money for a 1/6 RAW Mark VII. I love the way that looks unpainted!!

Me too, I wont buy either until there are some reviews of these.
I can only afford one and its a lot of money for me, so I'm not going to take the risk until I see in hand pics.

 

[Darth Lam]

Give us a review if and when you get it. I'm dying to know what these are like in hand.

I'm strongly considering putting out the money for a 1/6 RAW Mark VII. I love the way that looks unpainted!!

Is there a distributor in the U.S. somewhere for the raw version one?

 

[nightsurf]

I am thinking about putting my money on the painted Mark VII, but at this point a little scared because this company is new to me. That alloy Batman looks lackluster to me, but I haven't heard any issue with it so far. If I lose my patience in this thread about the quality of Play Imaginative, I may have to take the bullet and review it myself.

I read a lot of review. it seems that PI intended to make the batman face look like that ( a bit generic) but the paint is great & so is the articulation except for the elbow area. It can bend with no problem, but still a bit awkward. I can't explain it better

 

[mikericm]

Is there a distributor in the U.S. somewhere for the raw version one?

I actually had a conversation with PI on facebook. They were very quick and thorough to communicate. They can't sell 1/6 Iron Man outside of Singapore. Their license is limited to Singapore for 1/6. I assume that means they can't sell to retailers outside of singapre also.

I read a lot of review. it seems that PI intended to make the batman face look like that ( a bit generic) but the paint is great & so is the articulation except for the elbow area. It can bend with no problem, but still a bit awkward. I can't explain it better

I saw the Batman at a LCS and I thought it was just ok. Of course it sells for under $200 on ebay and a 1/6 Iron Man will be at least $500. So if MUST be much better than the Batman.

 

[Lawrence]

I couldn't even get the RAW version from Singapore eTailers. They could sell me the normal version, but not the RAW. I think the RAW you might of had to get directly from PI.

 

[mikericm]

I couldn't even get the RAW version from Singapore eTailers. They could sell me the normal version, but not the RAW. I think the RAW you might of had to get directly from PI.

I assume you're in Singapore? If thats the case, The Raw version will sell for a fortune. Is there an edition size to the raw or regular 1/6?

 

[Lawrence]

No I'm not in Singapore. I was directed to a couple of Singaporean (is that a word? ) eTailers, which shipped the normal 1/6 version internationally. I wanted to save money by buying from Singapore, instead of BBTS, but the total price including shipping is still a bit crazy. So pass.

I do not know the edition sizes of either.

 

[Titanchuck]

No I'm not in Singapore. I was directed to a couple of Singaporean (is that a word? ) eTailers, which shipped the normal 1/6 version internationally. I wanted to save money by buying from Singapore, instead of BBTS, but the total price including shipping is still a bit crazy. So pass.

I do not know the edition sizes of either.

Could tell us who are these "Singaporean" etailers who sells and ships worldwide?

 

[GodofWar]

Even if you purchase the 1/6 Mark VII through Singapore or someone willing to ship, the Armory and figure are not light and shipping will make it just as much as if you just end up purchasing from BBTS.
My advice is to get it from there before you can't get it at all.
I don't know edition sizes, but these don't look like there will be lots to go around of them. I'm also waiting for a US distributor to announce the first 1/4 PI Mark 42. Nothing yet?

 

[mikericm]

Even if you purchase the 1/6 Mark VII through Singapore or someone willing to ship, the Armory and figure are not light and shipping will make it just as much as if you just end up purchasing from BBTS.
My advice is to get it from there before you can't get it at all.
I don't know edition sizes, but these don't look like there will be lots to go around of them. I'm also waiting for a US distributor to announce the first 1/4 PI Mark 42. Nothing yet?

I searched their site and didn't see it, but do you know if BBTS has the RAW edition available?

 

[Lawrence]

I don't think BBTS has the RAW version.

Could tell us who are these "Singaporean" etailers who sells and ships worldwide?

https://simplytoys.biz/index.php?main_page=product_free_shipping_info&products_id=4661

https://www.tfh.com.sg/product_details.php?prod_id=5083

Might have to email them first,to get an approx on shipping to where you are. If you're in the US, I'm not sure whether it might be cheaper to order from BBTS anyway.

 

[GodofWar]

The RAW version I haven't seen being available with any retailer in the US unfortunately. Another thing that concerns me is the licensing for other countries. Why would they release all the other figures, but not release the 1/6 RAW to the US knowing they can make much more $$$. Makes no sense.