hexad_2808
Super Freak
Thanks found the dynamic stand thread! They going for $22 a pop on OSK, around half of the original HT's price, might pick this up
Show Your Entire Iron Man & Avengers Collection!
- Thread starter Fan
- Start date
Help Support Collector Freaks Forum:
Thanks found the dynamic stand thread! They going for $22 a pop on OSK, around half of the original HT's price, might pick this up
enzolt
Super Freak
hexad_2808
Super Freak
Sweet! Thanks!
I jumped on these from OSK as well. Ordered four of them right out of the gate. I'll also report back.
Sent from my iPhone using Tapatalk
hexad_2808
Super Freak
Awesome! Please share! I wanna hop in too but going away overseas for three weeks, don't think it'll arrive to Aus from OSK within 5 days
Skillerwhale
Super Freak
No, it's the PJToys 1/6 stand sold through OSK. https://onesixthkit.com/index.php?route=product/product&product_id=1007
Very similar, with a bit more weight. And cheaper. And not sold out two years ago.
Brainiac
Super Freak
CTO15
Super Freak
Update to my collection.
Craig Walker
Super Freak
Same. Really like those.
enzolt
Super Freak
CTO15
Super Freak
Re: Show Your Entire Iron Man & Avengers Collection!
Correct, ikea besta shelves with glassvik doors
Correct, ikea besta shelves with glassvik doors
darthconlan
Super Freak
- Joined
- Dec 1, 2011
- Messages
- 1,311
- Reaction score
- 3
Would the fit a hulkbuster?
BagginsOfBagEnd
Super Freak
Update to my collection.
That's a nice collection and display...love those display units.
Craig Walker
Super Freak
Sucks. The closest IKEA to me is 6 hours away.
Edit: Wait, Amazon ships, and carries some of their stuff
Edit: Wait, Amazon ships, and carries some of their stuff
Motuxmen
Super Freak
- Joined
- Feb 13, 2014
- Messages
- 10,760
- Reaction score
- 112
I thought that may be the case but wanted to be sure. Thank you.
No one knows the exact dimensions of hulkbuster so there's really no way to know.
- Joined
- Nov 27, 2013
- Messages
- 2,388
- Reaction score
- 739
That's a pretty good deal- I bought up various dynamic stands from places parting out figures so I could swipe the flexible arm for my magnet stands, they'd be $15-$20 if you could find them
While I'm at it, the setup at the moment-
poseidon215
Super Freak
I might wanna steal that magnet idea. Really cool. Care to share more of the process n material?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Joined
- Nov 27, 2013
- Messages
- 2,388
- Reaction score
- 739
Sure- the bit that makes it a bit tough is the fact that the threads on the dynamic stands are metric M8 with a fine pitch , so M8x1.00 in thread speak. This sort of thread basically doesn't exist in the world of couplers.
The only source I found is this guy in China on ebay-
https://www.ebay.com/itm/141855636138
Selling for $10 for 2. I have made offers for $8 for the pair and got them, but still pricey. That said, I never found a better option.
The only other one I saw was these
https://www.ebay.com/itm/ID-Threade...r-4mm-Tubing-Pipe-M8x1-0-Inline-/201694794513
but I these guys would not charge a reasonable shipping cost if you bought a large quantity no matter how much I suggested that it wouldn't cost $20 to ship 10 small pieces of metal, in the end the china one was cheapest.
The magnets I got from K&J, mounting magnets with a hole big enough for an M8 bolt. They have magnets with a female shaft built in- but it is a coarse thread, and they don't and won't make fine thread versions. It would be way simpler if those existed, but instead I use the magnet with the hole, put a M8x1.00 bolt though (Lowes, Home Depot etc should have them) it and tighten the coupler in the other side, then the dynamic stand threads into the coupler
https://www.kjmagnetics.com/proddetail.asp?prod=MM-B-48
Most of mine have a nut on there was well with the coupler, I was trying different things and just left them there when I found the couplers. Eventually I'll paint them black
The magnets aren't exactly cheap, but they are high quality and crazy strong. Every month K&J does a coupon code so its worth getting on their mailing list. They get cheaper if you buy more and the coupons are worth a percentage off the price so it can save you a few bucks each if you buy a few at a time. I tried to find a way to use slightly cheaper smaller magnets (and tried to drill the hole bigger, its very difficult) or to use the male stud mounting magnets (only comes with a coarse thread) with a coupler with coarse on one side and fine on the other, but I couldn't find one.
I also get the rubber covers for the magnets, both to dull the force a bit (they are stronger then they need to be for this) and to save any scratching
https://www.kjmagnetics.com/products.asp?cat=170
The base is 2'x1' sheets of steel I got a Lowes, I have three in a row on top of the shelf. I painted them black, and sit them on some of that rubbery drawer liner material so they don't scoot around or scratch anything. That said anything ferrous would work if you have a metal shelf or something else lying around.
There's probably more than a few ways to accomplish this, but finding or making an appropriate female side of the M8 stand thread is the hardest part.
This vastly reduces the clutter of bases. I was basically at the limit space wise just because of the size of the clunky bases, plus there were so many different styles it was annoying. This really frees up room and I will be fitting a lot more armors in the same space. Plus with this setup I can do flying poses that hang off the shelf at near 90 degrees.
Also my future planned display shelf is going to have metal up above as well, so flying poses can hang attached from the top as well
With bases
With magnets
Just had to buy a couple extra dynamic stands for the armors that didn't come with them (Midas and the diecasts). Haven't decided how to work magets in with with Snapper and Peacemaker yet, but stands aren't totally necessary with them
The only source I found is this guy in China on ebay-
https://www.ebay.com/itm/141855636138
Selling for $10 for 2. I have made offers for $8 for the pair and got them, but still pricey. That said, I never found a better option.
The only other one I saw was these
https://www.ebay.com/itm/ID-Threade...r-4mm-Tubing-Pipe-M8x1-0-Inline-/201694794513
but I these guys would not charge a reasonable shipping cost if you bought a large quantity no matter how much I suggested that it wouldn't cost $20 to ship 10 small pieces of metal, in the end the china one was cheapest.
The magnets I got from K&J, mounting magnets with a hole big enough for an M8 bolt. They have magnets with a female shaft built in- but it is a coarse thread, and they don't and won't make fine thread versions. It would be way simpler if those existed, but instead I use the magnet with the hole, put a M8x1.00 bolt though (Lowes, Home Depot etc should have them) it and tighten the coupler in the other side, then the dynamic stand threads into the coupler
https://www.kjmagnetics.com/proddetail.asp?prod=MM-B-48
Most of mine have a nut on there was well with the coupler, I was trying different things and just left them there when I found the couplers. Eventually I'll paint them black
The magnets aren't exactly cheap, but they are high quality and crazy strong. Every month K&J does a coupon code so its worth getting on their mailing list. They get cheaper if you buy more and the coupons are worth a percentage off the price so it can save you a few bucks each if you buy a few at a time. I tried to find a way to use slightly cheaper smaller magnets (and tried to drill the hole bigger, its very difficult) or to use the male stud mounting magnets (only comes with a coarse thread) with a coupler with coarse on one side and fine on the other, but I couldn't find one.
I also get the rubber covers for the magnets, both to dull the force a bit (they are stronger then they need to be for this) and to save any scratching
https://www.kjmagnetics.com/products.asp?cat=170
The base is 2'x1' sheets of steel I got a Lowes, I have three in a row on top of the shelf. I painted them black, and sit them on some of that rubbery drawer liner material so they don't scoot around or scratch anything. That said anything ferrous would work if you have a metal shelf or something else lying around.
There's probably more than a few ways to accomplish this, but finding or making an appropriate female side of the M8 stand thread is the hardest part.
This vastly reduces the clutter of bases. I was basically at the limit space wise just because of the size of the clunky bases, plus there were so many different styles it was annoying. This really frees up room and I will be fitting a lot more armors in the same space. Plus with this setup I can do flying poses that hang off the shelf at near 90 degrees.
Also my future planned display shelf is going to have metal up above as well, so flying poses can hang attached from the top as well
With bases
With magnets
Just had to buy a couple extra dynamic stands for the armors that didn't come with them (Midas and the diecasts). Haven't decided how to work magets in with with Snapper and Peacemaker yet, but stands aren't totally necessary with them
Last edited:
poseidon215
Super Freak
Sure- the bit that makes it a bit tough is the fact that the threads on the dynamic stands are metric M8 with a fine pitch , so M8x1.00 in thread speak. This sort of thread basically doesn't exist in the world of couplers.
The only source I found is this guy in China on ebay-
https://www.ebay.com/itm/141855636138
Selling for $10 for 2. I have made offers for $8 for the pair and got them, but still pricey. That said, I never found a better option.
The only other one I saw was these
https://www.ebay.com/itm/ID-Threade...r-4mm-Tubing-Pipe-M8x1-0-Inline-/201694794513
but I these guys would not charge a reasonable shipping cost if you bought a large quantity no matter how much I suggested that it wouldn't cost $20 to ship 10 small pieces of metal, in the end the china one was cheapest.
The magnets I got from K&J, mounting magnets with a hole big enough for an M8 bolt. They have magnets with a female shaft built in- but it is a coarse thread, and they don't and won't make fine thread versions. It would be way simpler if those existed, but instead I use the magnet with the hole, put a M8x1.00 bolt though (Lowes, Home Depot etc should have them) it and tighten the coupler in the other side, then the dynamic stand threads into the coupler
https://www.kjmagnetics.com/proddetail.asp?prod=MM-B-48
Most of mine have a nut on there was well with the coupler, I was trying different things and just left them there when I found the couplers. Eventually I'll paint them black
The magnets aren't exactly cheap, but they are high quality and crazy strong. Every month K&J does a coupon code so its worth getting on their mailing list. They get cheaper if you buy more and the coupons are worth a percentage off the price so it can save you a few bucks each if you buy a few at a time. I tried to find a way to use slightly cheaper smaller magnets (and tried to drill the hole bigger, its very difficult) or to use the male stud mounting magnets (only comes with a coarse thread) with a coupler with coarse on one side and fine on the other, but I couldn't find one.
I also get the rubber covers for the magnets, both to dull the force a bit (they are stronger then they need to be for this) and to save any scratching
https://www.kjmagnetics.com/products.asp?cat=170
The base is 2'x1' sheets of steel I got a Lowes, I have three in a row on top of the shelf. I painted them black, and sit them on some of that rubbery drawer liner material so they don't scoot around or scratch anything. That said anything ferrous would work if you have a metal shelf or something else lying around.
There's probably more than a few ways to accomplish this, but finding or making an appropriate female side of the M8 stand thread is the hardest part.
This vastly reduces the clutter of bases. I was basically at the limit space wise just because of the size of the clunky bases, plus there were so many different styles it was annoying. This really frees up room and I will be fitting a lot more armors in the same space. Plus with this setup I can do flying poses that hang off the shelf at near 90 degrees.
Also my future planned display shelf is going to have metal up above as well, so flying poses can hang attached from the top as well
With bases
With magnets
Just had to buy a couple extra dynamic stands for the armors that didn't come with them (Midas and the diecasts). Haven't decided how to work magets in with with Snapper and Peacemaker yet, but stands aren't totally necessary with them
Cool thanks dude. Definitely gonna put it into consideration with my plan for custom display cab.
Sent from my iPhone using Tapatalk
Similar threads
