Hot Toys-MMS116:IRON MAN- Tony Stark (Mech Test Version) spec + pics

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I was going to pass on the figure however, I think I'll add to my collection. I find more to like than to dislike about the figure however, I may wait to see if price drops first.
yup..same to me..at 1st, this one didnt come in my buy list at all..but after saw final product, straightly fall in love lol..
 
your pics are clear as a whistle, snake:clap

btw, if its not too much trouble, could you take off those gauntlets and boots, and put him in the normal black leather shoes that he came with?

I wanna see how he looks like without those gears :pray::monkey3
 
After seeing the pics of the boots and arm piece, I think Hot Toys should make an Iron Man suit that you could snap on and off of Tony in a tight black outfit like in the first movie. That would be so cool, and they could sell it for $250 and it would probably sell out.
 
After seeing the pics of the boots and arm piece, I think Hot Toys should make an Iron Man suit that you could snap on and off of Tony in a tight black outfit like in the first movie. That would be so cool, and they could sell it for $250 and it would probably sell out.
They could not do it in 1:1 scale, at least not completely and require CGI. I would not expect a 1:6 scale to do so. HT is done with IM with this figure... 6 versions of the same man in different suit (7 if you count the man suit) from 1 movie... a record I believe....

IM2 provide more of a cash cow for HT.
 
The more pictures I see of this figure the more I fall in love with it. The HS on this is just mind blowing, one of the best I've ever seen.

Any news on when this will be getting to EU retailers?
 
Lovin the boots. Great pics solidsnake_84
tq bro!!

your pics are clear as a whistle, snake:clap

btw, if its not too much trouble, could you take off those gauntlets and boots, and put him in the normal black leather shoes that he came with?

I wanna see how he looks like without those gears :pray::monkey3
his gauntlets also can be removed is it?i thought only the boots lol.i think got the pictures already rite in the previous pages showing tony wearing his black leather shoes .i try my best if i got time later..but scared if cannot snap back into the standard outfit lol..

After seeing the pics of the boots and arm piece, I think Hot Toys should make an Iron Man suit that you could snap on and off of Tony in a tight black outfit like in the first movie. That would be so cool, and they could sell it for $250 and it would probably sell out.
yea me too..hot toys just produce 1 tony stark, and the additional gadget like mark 1-6 for us to snap into tony stark body lol..

mine shipped today... :panic: :panic:

Great pics solidsnake_84!!! Thx!!
thanks bro..glad that u order also..

The more pictures I see of this figure the more I fall in love with it. The HS on this is just mind blowing, one of the best I've ever seen.

Any news on when this will be getting to EU retailers?
yup bro..HS really outstanding...2nd best figure i ever owned since HT godfather..
 
Eric from Toys2 e-mailed me last night and said he's shipping Tony Mech Tech to me on Monday !
 
Can someone snap pics of the box please... I do not believe we have any yet.. Is it godfather big??? just wondering... Im so close to picking this guy off so I can finish my Ironman collection on a high note...
 
Ive been bad... I just ordered this... Ive lost all will power... Shame on you hottoys youve done it yet again....

I will forgive you dude:wink1: its a hard fig to resist ..but lets see if you will stick to your word and not buy any of the new Ironman marks after the little rant you had about them being 2 similar to the M3:lol
 
Can someone snap pics of the box please... I do not believe we have any yet.. Is it godfather big??? just wondering... Im so close to picking this guy off so I can finish my Ironman collection on a high note...

here... from XL-shop ...forum...
TonyMech_14.jpg


TonyMech_02.jpg


TonyMech_01.jpg


TonyMech_03.jpg


TonyMech_04.jpg
 
Mini Review of HT's MMS116 - Mech Test, Tony Stark.

1. Chest Arc Reactor light are power by batteries in the upper torso, switch and batteries' cover are at the back. Neck is fixed, only left a double ball joint at the based of the head. (3 Batt., 4.5v)

2. LED of the hands are powered by batteries in "the controller box". Power wires are actually the blue colour ones. The blue wires actually goes through the black sleeves near the elbows and snake into the forearms to power LEDs at the end of the ball joint of the wrist.
(3 Batt., 4.5v)

3. Each foot actually has its own batteries and switch, poor articulation, the front of the foot (which hold the batteries) has some, the ankle side movement is solely depending on the ball joint, pins at the side holds the feet and limits the range of the side movement. Could have implemented better..
(2 Batt., 3.0v)

4. Mechanical arm/robot is fun... fire-hose is a separate unit, can be detached (contrary to what the instructions says)

Removal of Arm Exo-Frame
1. Split open the forearm exo-frame, moderate force maybe needed, as it depends on how well HT glue your copy, your experience would vary.
2. Peel back the long black sleeves, Double tape is used at the end of the wrist.
3. Two screws hold the fore arm close, Pull the blue wires into the exo-armour more so some working slack is allowed. Slide the upper arm exo-frame up towards the shoulders and twist it to the side so that the screw near the elbow can be exposed. Un-screw both screws. U should be able to remove the LED (together within the plastic ball wrist) and wires from the forearms.
4. The LED "casing" should be small enough to pass through the hole in the black long sleeves. Slide the entire arm exo-frame out. Remove everything as you'll do with a normal TT body.

p.s. the wrist ball joint are the same size for Mk.3, Mk.2, BD Mk3. so you can swap the hands

-Narrow shoulder TT with fixed neck (Arc Reactor) and modified forearms. Still retain double-joint elbows.
mecht1a.jpg


-The area where the wires for the LED comes in (hole in the sleeves) are painted black. There are no rubber plugs for all the screws holes that a normal TT would have.
mecht2a.jpg


-The cloths and exo-frame... The hole in the grey shirt is smaller (than the hole of the black shirt) and the edges of the hole is stuffed around the "arc reactor".
mecht3a.jpg


-Arc Reactor through fabric.. looks quite natural.
mecht4a.jpg
 
Mini Review of HT's MMS116 - Mech Test, Tony Stark.

1. Chest Arc Reactor light are power by batteries in the upper torso, switch and batteries' cover are at the back. Neck is fixed, only left a double ball joint at the based of the head. (3 Batt., 4.5v)

2. LED of the hands are powered by batteries in "the controller box". Power wires are actually the blue colour ones. The blue wires actually goes through the black sleeves near the elbows and snake into the forearms to power LEDs at the end of the ball joint of the wrist.
(3 Batt., 4.5v)

3. Each foot actually has its own batteries and switch, poor articulation, the front of the foot (which hold the batteries) has some, the ankle side movement is solely depending on the ball joint, pins at the side holds the feet and limits the range of the side movement. Could have implemented better..
(2 Batt., 3.0v)

4. Mechanical arm/robot is fun... fire-hose is a separate unit, can be detached (contrary to what the instructions says)

Removal of Arm Exo-Frame
1. Split open the forearm exo-frame, moderate force maybe needed, as it depends on how well HT glue your copy, your experience would vary.
2. Peel back the long black sleeves, Double tape is used at the end of the wrist.
3. Two screws hold the fore arm close, Pull the blue wires into the exo-armour more so some working slack is allowed. Slide the upper arm exo-frame up towards the shoulders and twist it to the side so that the screw near the elbow can be exposed. Un-screw both screws. U should be able to remove the LED (together within the plastic ball wrist) and wires from the forearms.
4. The LED "casing" should be small enough to pass through the hole in the black long sleeves. Slide the entire arm exo-frame out. Remove everything as you'll do with a normal TT body.

p.s. the wrist ball joint are the same size for Mk.3, Mk.2, BD Mk3. so you can swap the hands

-Narrow shoulder TT with fixed neck (Arc Reactor) and modified forearms. Still retain double-joint elbows.
mecht1a.jpg


-The area where the wires for the LED comes in (hole in the sleeves) are painted black. There are no rubber plugs for all the screws holes that a normal TT would have.
mecht2a.jpg


-The cloths and exo-frame... The hole in the grey shirt is smaller (than the hole of the black shirt) and the edges of the hole is stuffed around the "arc reactor".
mecht3a.jpg


-Arc Reactor through fabric.. looks quite natural.
mecht4a.jpg

All well and good. HT just needs to improve the cut of their 1/6 t-shirts (collar is too high)!
 
Back
Top