1/6 MMS DX 02 - TDK- BATMAN full spec and pics

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

I keep trying to talk myself into the first TDK suit....Bale head, cheaper price, can get one right away, no oil issues...

But I just can't do it.

Try harder...I have the DX 02 and feel like I made a mistake. Now, I;m buying the first version.

If only I had researched and known about the first version, I would have gotten it instead of the newer.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Please don't bring trash talk about other members into threads where they're not even participating nor is the discussion in question going on.

As for the other comments, they've been removed so as not to instigate anything.

Not sure what you're referring to, but I assume I started it.

Didn't see any of the replys because I had to step away from the computer (I'm at work).

Sorry for stirring up negativity if I did. :)


:peace
 
Last edited:
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Not sure what you're reffering to, but I assume I started it.

Didn't see any of the replys because I had to step away from the computer (I'm at work).

Sorry for stirring up negativity if I did. :)


:peace

Nae wasn't you but I think was me agreeing and then me stirring ____ up :monkey5
But MF he was everywhere :p Well it's fine to remove the post, was all common knowledge anyways :p
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

I really want this figure, but unless I can find some place to order it from that's really cheap I can't swing it with all the other things I'm buying. :(
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Hey guys, Im a little new here so bare with me!

Ive been watching these threads for quite some time, but finally decided to post so I could get a DIRECT and final clarification before I decide to make my purchase. Would you guys suggest to me to go ahead and buy this figure now or wait until the new release by DCD? Do you all feel this issue will be resolved. I get the feeling that some do & some dont.

In the long run what decision do you feel will benefit me?

Thanks for your feedback in advance....!

PS: I apologize if this is posted in the wrong section. There are so many different threads about this I couldnt decide which one would be correct so I just posted in the two threads, I felt I could get the most valid and honest information from experts!
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

I think everyone wouldl agree that the problem has not been resolved satisfactory and you should hold off until some confirmation is avaialble or HT finally coming out and acknowledging the problem and announcing the solution. It's hard to resist but you can always still get a leaky DX02 in the end when you decide to.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Can either HT Bruce Wayne head fit on the dx?
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

But I read about there being a magnet that held the head in place. Presumably this is the neck peg, otherwise you wouldn't be able to pose the actual head. Is some modification required to use a regular, flesh colored neck peg on this figure?
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

oooh looking good!
does the head fit on the DX neck though, especially the magnetic one?
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

He kept the neck peg from the v1. Took the magnetic peg out and plugged in the v1 skin neck.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

He kept the neck peg from the v1. Took the magnetic peg out and plugged in the v1 skin neck.

Sorry, not really understanding, so would it still be easily swapable with the PERS head?

Thanks for the pic btw.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Hey guys, Im a little new here so bare with me!

Ive been watching these threads for quite some time, but finally decided to post so I could get a DIRECT and final clarification before I decide to make my purchase. Would you guys suggest to me to go ahead and buy this figure now or wait until the new release by DCD? Do you all feel this issue will be resolved. I get the feeling that some do & some dont.

In the long run what decision do you feel will benefit me?

Thanks for your feedback in advance....!

PS: I apologize if this is posted in the wrong section. There are so many different threads about this I couldnt decide which one would be correct so I just posted in the two threads, I felt I could get the most valid and honest information from experts!

No reason not to wait for the DCD release.

Either it'll be resolved by then or not, but either way, it'll be cheaper for you.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

I read an auction that said the battery for the Sonar head is not included, is that correct?
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

That is wrong, batteries are included with the figure, could be the auction seller has removed them to not have to worry about corrosion or anything like that, but Hot Toys ships the figure with batteries.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Hmm...the reason I ask is that I received mine today and the sonar eyes didn't work. I ran home at lunch and didn't have time to mess around with it fully tho. Is there a sticker blocking the connection, or do I have a faulty one?
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

Yes, there's a small plastic tab sticking out of the back of the neck that you have to remove before you can use the lights.
 
Re: Hot Toys - MMS DX 02 - TDK- BATMAN full spec and pics

**phew** Thanks!

Also, is there a trick to getting the sonar head off and on? I thought it came right off because of the magnet but it was stuck on tight. I didn't force it tho.

Or better yet....around what page would in hand pics be in this thread, so I can stop bugging everyone with question's that have most likely been A&A'd.
 
Back
Top